Sweeper fault maintenance, sweeping robot fault and repair

1. Many sweeping robots have an on/off key at the bottom. Before charging, check if the switch key is turned off, as the switch key cannot be charged.

2. When charging, check whether the sweeping robot is in contact with the charging dock and whether the connected power cord is loose or falling off.

3. After the sweeping robot is fully charged, the power supply on the sweeping robot is not turned off after the charging base is unplugged, resulting in insufficient power supply and the machine cannot be turned on.

If it is not due to the above reasons, you will need to replace the motherboard. However, not all robot vacuums can replace the motherboard, so on the premise of replacing the motherboard, you should ensure that the robot vacuum cleaner you buy has a warranty period.

If the sweeper is faulty, you can find after-sales service for maintenance, and now the sweeper is good after sale.

Sweeper breakdown repair, you can return to the factory for repair. Because there is generally a warranty after the purchase.

Hello, if it is a system failure, you need to get it to the after-sales service and let them check it for you and repair it.

If the sweeper fails, first check whether the battery has electricity, measure the voltage with a multimeter, and then if it is normal, open the back cover to check whether the voltage output at both ends of the motor is normal?

First, fault maintenance, this should have after-sales service, and one goes to the after-sales point to pick it up.

The sweeper fault maintenance can look at his operating instructions or go to the after-sales service to repair.

If there are some faults in your mobile phone, try to find their after-sales service, they will definitely know more about this piece and will tell you how to operate it.

Sweeping machine fault maintenance, this to find after-sales maintenance to help you repair.

Sweeper fault maintenance: The general sweeper fault is a line problem.

Sweeper fault maintenance is specialized, it is necessary to find a professional maintenance personnel to repair.

If you want to repair the fault of this sweeper, you can consult the customer service.

Sweeper fault maintenance, you should go to a professional store to check the situation of this sweeper maintenance.

The sweeping robot has the following faults and repair methods:1The robot won't start or has no power:

First of all, make sure that the robot's power plug is properly connected and check the power cord for damage. If the power supply is normal, but the robot still won't start, it may be that the battery is aging or damaged. You can try to replace the battery or contact the manufacturer for repair.

2.The robot has no suction or diminished suction: This may be because the robot's vacuum inlet or filter is blocked.

Clean the vaction and filter and make sure they are free of residue. Alternatively, you can check if the robot's vacuum cleaner parts need to be replaced. 3.

The robot moves abnormally or in an inaccurate direction: If the robot's navigation system is faulty, it may not be able to move properly or avoid obstacles. You can try resetting the navigation parameters of the robot or calibrating it.

If the problem persists, you may need to contact the manufacturer for repair or replacement of the navigation part. 4.The robot makes an abnormal sound or vibrates:

Abnormal sounds or vibrations are usually caused by loose or damaged parts of the robot. You can inspect the bottom of the robot for loose parts and make sure they are installed correctly. If the problem persists, it is recommended to contact the manufacturer for maintenance.

Hello, the solution to the failure of the sweeper drive wheel is as follows: 1. Check whether there is dust or dirt on the downward view sensor at the bottom of Ecovacs DEEBOT, and if so, use a semi-dry cotton cloth to wipe off the dirt. 2. If the first step does not solve the problem, then check whether the buffer collision plate is out of order, we can touch the left, middle and right sides of the buffer collision plate with our hands to see if it can be automated. If the fault cannot be solved, then the only way to contact the buyer of the product is to help solve it.

Common fault 2: The product cannot perceive the staircase Solution: This product can perceive the vast majority of stairs with a height difference greater than 8 cm, but for some smooth and slippery ground or reflective ground, its performance in detecting the drop will be reduced.

If this is not the case, you can first check whether there is too much dust on the lower view sensor of the product, if this situation still occurs after wiping, it may be a sensor failure. Common fault three: the product is in trouble Solution:

This product may get stuck in cleaning the room, in this case, it will try to get out of the trouble by various methods, once it can't get out, please manually help the product get out of the predicament and tidy up the obstacles. The dilemma situation may be as follows:1

The machine was tangled in scattered wires on the ground. 2.The machine is wound by the whiskers of a drooping curtain or carpet.

3.There are too many obstacles in front of the machine.

Hello pro The failure of the sweeper drive wheel is caused by the following reasons:1The wheels are stuck and bent to stay:

Check the drive wheels for dust or debris that gets stuck, and you need to clean the drive wheels and the surrounding area. 2.Drive Wheel Failure:

Check the drive wheel and axle for damage, and replace the drive wheel assembly if there is a problem. 3.Motor Failure:

The buried Gauss motor of the drive wheel may be faulty and the motor and circuit need to be inspected for repair or replacement. 4.Sensor failure:

The electronic system of the sweeper may have a sensor fault that needs to be checked and repaired.

The complete list of CCVACS robot vacuum cleaners is as follows:

1. DEEBOT appears with a voice prompt "Difficulty in operation, please check the drive wheel".

Solution: Slide the drive wheel after shutting down, check whether it can rotate, rebound, and clean up. Then put DEEBOT back in its original place and click the host start button to continue working.

2. A voice prompt appears in the DEEBAO Naijiao Matching Hole, "Dust accumulation of the downward view sensor, please wipe it".

Solution: Regularly wipe the downward view sensor to effectively avoid such failures.

3. DEEBOT can't turn on or doesn't respond when it is turned on.

Solution: Push the power switch back and forth 2-3 times (lift the face cover, above the dust box), and finally push it to the boot position, then press the start button intermittently, and pause for 2-3 seconds in the middle.

4. DEEBOT DN33 machine is noisy and short selling when it is working.

Solution: When there is abnormal sound in the machine, check whether the roller brush is installed correctly, or whether there are any small accessories that are missing the roller brush during the previous cleaning, all of the above situations will cause abnormal sound of the machine. Check whether the filter material of the dust bin is not cleaned.

5. DEEBOT DN33 can't find the charging dock.

Solution: 1. Failure to remove the anti-collision strip and other protective objects: remove all protective films, anti-collision strips and other protective objects of the machine when leaving the factory on the host and charging base.

2. The host has been artificially moved during the cleaning process: if the DEEBOT has been moved artificially during the cleaning process, the map may be lost, and it is recommended to manually move the machine back to the charging dock.

3. Confirm whether the map has been generated: DEEBOT needs to start from the charging dock for the first time to clean and build the map, and the rag bracket cannot be installed.

4. Make sure the charging dock is placed correctly.