How to remove small yellow dots on the surface of the car

The role of waxing: car waxing, as a traditional project of car beauty, the role of waxing is first of all waterproof, acid rainproof, due to the protection of car wax, the amount of water droplets attached to the body will be reduced, the effect is very obvious, can reach 50% to 90%; The second is to prevent high temperature and ultraviolet rays, the weather is getting hotter and hotter, the car is easy to drive or store outside all the year round due to the aging and fading of the car paint, and the film formed by waxing can reflect part of the light, effectively avoiding the aging of the car paint; How to call: 1

Waxing is not fixed, it depends on the driving environment of the vehicle. That is, if you rarely drive during this period and drive in a less dusty environment, it is recommended that you wax every 3-4 months. And if you drive every day and the vehicle has been through wind and rain for a long time, you can apply a coat of wax for 2-3 months.

2.If you are just bought back a new car, don't listen to people fool to wax to spend money, in fact, the new car just bought home on waxing this is a very wrong approach, because the new car in the factory body comes with the original wax, a few days after you buy home if you put a layer of wax will cause damage to the original wax on the surface of the new car, the gain outweighs the loss and cause unnecessary waste. Usually, after five months of new car, it is correct to touch the paint with your hands and then consider waxing if it feels unsmooth.

3.Of course, the wrong waxing method will also damage the car paint, the gain outweighs the loss, when waxing must be in the shade of the car wax, otherwise, the adhesion of the car wax will decrease, affecting the waxing effect. When waxing, first clean the car, then dip the sponge in wax, gently apply it on the paint, wax in the form of a circle, do not go back and forth in a straight line, and avoid strong annular diffusion caused by uneven coating.

You can go to a car beauty shop, they can deal with this situation for you, if you are inexperienced, don't rub it.

You can wash it slowly with car wash mud, but if you don't use too much, you need to waste some effort.

Ways to remove the yellow dots on the white car:1. Use car washing mud, add more water, and use enough strength.

2. Spray the car with the solvent of iron powder for 5 minutes, and then rinse it with water.

3. You can wipe it with a dry cloth dipped in toothpaste, which is the best polishing agent and has no damage to the paint.

4. It can be polished or waxed. There are many reasons why a white car turns yellow, mainly related to changes in weather and daily maintenance. The exposure of ultraviolet rays from sunlight is the main culprit of paint oxidation. Coupled with the pollution in the air now, such as exhaust gas, dust, rain cement slurry, etc.

Maintenance of car surfaces.

Waxing. This is also a way that we often use to maintain the surface of the car, and it is very easy to operate, we can do it ourselves at home. It is also very obvious, it can make the car look like new, and it can effectively insulate the air and rain, and prevent the surface from rusting.

1.First of all, you can use a special car wash agent to clean the yellow spots on the car. Specialized car wash agents can be purchased online or in physical car wash stores, and only need to be sprayed with car wash agent to clean up.

2.Then there is the use of toothpaste to clean the surface of the car. Toothpaste not only cleans teeth, but also cleans shoes and cars, so toothpaste is very useful!

3.The second is to polish and wax the car. If there are a lot of small yellow dots on the car, then I recommend going to the place where the car is washed and polished and waxed, so that the car will look brand new.

It depends on what the situation is, if it is dirty, the waxing can be removed, if it is too old, the paint is discolored, and the paint has to be re-baked.

When there are stains on the surface of the car's paint, it is necessary to use car wash mud to wet and clean, and then rinse it with clean water, or you can use a spray containing iron powder to spray on the small yellow dots and wait for a few minutes before dissolving, and then rinse with water.

Car cleaner is mainly made of surfactants, fungicides, polishing agents and other environmental protection technologies high-tech configuration, can quickly clean the surface of the car, glass body, etc., the use of car cleaner can remove all kinds of adhesive tape pasted on the surface of the car glass, after the use of car cleaner, it can also form a protective film to protect the car paint, car cleaner is easy to use, fully shake before use, spray at a distance of 15 cm from the car body.

When a car is driven in a dusty area, it will leave dust and impurities on the white paint surface. Some impurities are stubborn and cannot be removed by ordinary cleaning, such as asphalt and bird droppings. These impurities are relatively viscous and need to be thoroughly removed by using special cleaning agents for moisturizing, decontamination and rinsing.

Car rust: Car rust is a thing that many car owners are worried about, and car rust is a very common thing, such as the side of the door, it is easy to touch the paint when the door is opened, and the car is very easy to rust if it loses the protection of the paint surface.

When it is windy and rainy, if the vehicle is parked outside, the inner layer of the car coat will repeatedly whip the car paint, and countless small scratches will be scratched on the car body, and if the car clothes are blown into the wind and sand, the number of scratches will be more. Over time, it will also make the paint surface black. In addition, do not use a duster or rag to clean the sand particles on the car body directly after the wind and sand, you should rinse the car body with clean water, so as to prevent the sand particles on the duster and rag from scratching the paint surface.

Cars are now not a rare thing for us, so it has become a more popular thing, basically people with slightly better family conditions can drive their own cars, so the car has become a kind of discussion on everyone's mind, now the mainstream car color on the road is white and black, especially white, he is more dirty, no matter what dirty things are stained on it are clear at a glance, just like the white car left with yellow dots, how should we remove it?

The first one, this is the simplest and most direct method, we can do it ourselves, we buy slightly better quality car wash mud, and then prepare enough water, and then use the car wash mud to rub the yellow spots on the body with water, and then clean with water, this method is a bit time-consuming and we need to be careful enough to completely remove;

Second, we can prepare some iron powder spray to spray on the yellow spots on the car body, and then let it soak for 4-6 minutes, and then we rinse it with clean water, of course, it must be clean enough, and if necessary, you can use cleaning liquid to clean, and it is best that the body does not retain iron remover;

Third, we should pay attention to what is the reason for the yellow spots before cleaning, if it is the quality of the car, the yellow spots caused by the rust of the iron sheet under the paint, then we can not deal with it, we can only go to the 4S shop to let professionals give surface rust removal and spot repair, and then re-paint treatment;

Fourth, we can enter the 4S shop to polish, wax, and crystalline the car, of course, we must first polish and wax and then crystal-plate, otherwise it may not play any role;

Fifth, we can also prepare an appropriate amount of beautiful car crystals for processing, his use can not only keep the body clean but also avoid the oil juice from staining our car again, but also isolate it from the air to avoid paint oxidation;

Sixth, prepare a little alcohol and gauze to scrub, maybe you will get a surprise; Or prepare a little vinegar and scrub it with gauze, but you need enough water to wash it immediately after scrubbing with vinegar; There is also 84 liquid, of course, this also needs enough water, and it is cleaned with clean water immediately after scrubbing a part, so as not to cause damage to the white paint caused by the 84 retained body;

Remember: Acidic solvents must be cleaned with clean water after cleaning.