What to do with dirty things on the surface of the car body?

Updated on Car 2024-06-17
11 answers
  1. Anonymous users2024-02-12

    1. Banana water.

    Banana water is commonly known as Tianna water, dip the towel in banana water and gently wipe it on the paint spot, which can be used to dilute the paint, clean the paint point has a good effect, and finally rinse it with water. However, banana water is toxic, volatile and corrosive, which will have a corrosive effect on car paint, so special attention should be paid when using it.

    2. Gasoline. Gasoline dissolves paint, works well, is not corrosive, and is used in the same way as banana water.

    3. Alcohol. The paint can be removed by wiping with alcohol (industrial alcohol), find a soft cotton cloth dipped in alcohol, and gently wipe it on the paint.

    4. Wind oil essence.

    Wind oil essence has the effect of dissolving paint and can also be used to clean paint spots, and the operation is the same as alcohol.

    5. Asphalt cleaning agent paint thinner.

    Tarmac cleaner can also dissolve paint, spray evenly on the paint spot, wait for a period of time to soften and dissolve the paint spot, then wipe it with a towel, and finally rinse it with water.

  2. Anonymous users2024-02-11

    Situation 1: For the surface of the body is floating and sinking, we can sweep it off with a feather duster, wash it off with clean water, or wipe it off with a towel or sponge.

    Situation 2: For the dust with strong adhesion, first wash off the sand particles on the surface with clean water, then spray car washing agent on the body, and then use a towel or sponge to carefully clean all parts of the body, then rinse the body with water, and finally wipe the body clean with a towel.

    Situation 3: The most difficult thing to deal with is the gum insect feces on the surface of the car, these substances will corrode the car paint if they adhere to the surface of the car for a long time, and should be treated in time. When the gum droppings are not yet hard and dry, they can be wiped off with a towel or sponge.

    If the gum feces has hardened, it can be polished with a polisher or cleaned with car wash mud. However, in this case, it is recommended to go to a car wash for professional treatment to prevent dust from causing damage to the car paint.

    If the dust on the car body is sand, do not wipe it off with a towel, etc., as the sand will scratch the paintwork.

  3. Anonymous users2024-02-10

    Now it's all environmentally friendly paint, and the paint mixing and spray painting are all with gas masks.

    The protection is done well, and there is no harm.

  4. Anonymous users2024-02-09

    Polishing can be disposed of.

  5. Anonymous users2024-02-08

    Go wash off the car or wash it with detergent.

  6. Anonymous users2024-02-07

    Summary. Hello riders, if the dust is generally washed, rinse it with clean water and then wipe it with a towel.

    Hello riders, if the dust is generally washed, rinse it with clean water and then wipe it with a towel.

    If it's an oil stain or a stain that is difficult to remove. It can be treated with a neutral detergent.

    Well, like this, it is generally difficult to clean the oil stain, you can buy some special neutral cleaning agent to clean.

    1.Organic solvent removal. If it is difficult to remove the stain by brushing, you can choose an organic solvent, but you must pay attention to the organic solvent that has a dissolving effect on the paint (such as alcohol-containing alcohols, organic solvents such as benza, etc.).

    Generally, it can be soaked with gasoline and then wiped to remove the tomato.

    2.It can be cleared with a special cleaning agent. Tar remover is a common product in car beauty, mainly used for cleaning organic hydrocarbons such as asphalt and tar.

    Gum cleaner is a special cleaning agent for removing gum and bird droppings, which can effectively remove bird droppings and gums from the car surface.

    For this kind of traces that are more difficult to clean, we can go directly to the 4S shop or repair shop to buy a special cleaner according to our own car brand.

    When it comes to interior cleaning, I usually vacuum the dust first and then wipe it off with a damp towel.

    If you don't clean it often, some places are more difficult to clean, you can buy some special interior cleaning foam, spray it in the place that needs to be cleaned, wait for a while and wait for it to dissolve the dirty things and dry them with a towel.

    Interior cleaners generally don't require so many that they are available online, so you can browse and choose the right one for the price.

    If it is a leather seat, you need to buy a special leather cleaner.

    Xiqiao Zhibi hopes that I can help you, dear riders, can you give a thumbs up? Great encouragement for my work. Have a great day! Career Shun Min Qin Li!! <

    Than the heart] [than the heart].

  7. Anonymous users2024-02-06

    For the surface dust, it can be swept away with a feather duster, or rinsed with clean water; For the dust with strong adhesion, first wash off the sand particles on the surface of the car with clean water, spray the car wash agent evenly on the body after rinsing, and then use a towel or sponge to carefully clean all parts of the body, then rinse the cleaning agent on the body with clean water, and finally wipe it clean with a towel.

    Check what the spots on the body are causing it, it may be rust, gum, etc. If it is a gum, the owner can put the towel into the hot water, and then spread the hot towel on the gum, the gum will soften when heated, and then use the cleaning liquid to clean the small black dots at this time. You can also use a gum cleaner to clean the gum, spray it on the small black dots, and wait a few minutes to wipe it clean with a towel.

    If there is bird droppings on the surface of the vehicle or leaves falling on it when the vehicle is parked, bird droppings are organic matter and contain strong acidity, which is very harmful to the car paint, so it should be cleaned as soon as possible. As long as you find that the body is dirty, you should clean it in time, I don't know if the things attached to it will cause damage to the car paint, if there is no damage, it is good, if there is damage, the vehicle will cause corrosion and other effects.

    If it has been hardened, it can be polished with polishing wax and polishing machine, or it can be cleaned with car washing mud, and after the surface of the car is cleaned, waxing or sealing glaze can be carried out to form a protective layer on the surface of the body, which can well protect the car paint and prevent dust from damaging the car paint.

  8. Anonymous users2024-02-05

    You can use the most common foam cleaners to achieve a good cleaning effect, wipe it down, spray it with detergent, and wipe it with a towel several times after the foam is almost gone. After air drying, wipe the conditioner once to keep it clean.

    Vehicle seats are divided into flannel fabric and leather fabric, flannel fabric cleaning using high-efficiency foam cleaning agent sprayed on the fabric, after the foam is removed, wipe the seat repeatedly with a clean towel until the seat is as clean as ever. When cleaning leather fabrics, wash them with detergent first, and then remove the detergent with clean water.

    Repeated wiping must not have detergent left, apply leather maintenance agent, leather fabrics can not use products with too strong cleaning power, will corrode the leather surface and cause fading, cracking and other damage. Leather fabrics should not be cleaned too frequently, too frequent can only speed up the aging of leather, generally three to four months to clean it.

  9. Anonymous users2024-02-04

    The body cleaning method is as follows: 1. When cleaning the body, it is necessary to scrub it with a soft and clean sponge, because there is generally hard dust and mud on the car body, and if it is directly washed with high-pressure water flow, this is tantamount to letting the dust particles do "friction movement" on the surface of the car paint. When wiping the glass window, it needs to be wiped with a special glass cleaner, and at the same time, it should be dried with a clean towel, not in the sun.

    When you need to clean oil stains, you should gently wipe with a sponge dipped in kerosene or gasoline; However, when wiping plastic and rubber parts such as steering wheels and lamps, you can only use ordinary soapy water, and cannot use organic solvents such as gasoline, stain removers and thinners. 2. Before washing the car, the dust on the car should be removed, so that you can reduce your workload, and secondly, you can avoid too much dust and dust on the body, and scratch the body in the process of scrubbing.

  10. Anonymous users2024-02-03

    1. Brush with clean water. For dirt that has not been adhered for a long time, it can generally be brushed and removed. When brushing, the water temperature is at or below room temperature, and the brush should be a bristle brush to avoid scratching the paint surface.

    2. Removal of organic solvents. If it is difficult to remove the stain by brushing, you can choose an organic solvent, but you must pay attention to the organic solvent that has a dissolving effect on the paint (such as alcohols, benzene, etc.). Generally, it can be soaked with gasoline and then wiped to remove.

    3. It can be removed with a special cleaning agent. Tar remover is a commonly used product in car beauty, mainly used for cleaning organic hydrocarbon compounds such as asphalt and tar. Gum cleaner is a special cleaning agent for removing gum and guano and can effectively remove guano and gum from the car surface.

    The use of a special cleaning agent can effectively remove dirt without damaging the paint surface. It is recommended that in actual operation, it is best to give priority to special cleaning products, and if there are no special cleaning products, the first two methods can be considered as appropriate.

  11. Anonymous users2024-02-02

    The specific cleaning method is to vacuum with a high-power vacuum cleaner first, and at the same time cooperate with the ceiling soft brush for preliminary cleaning. Then spray the suede of the ceiling with a neutral foam cleaner, the general foam cleaner will be "hanging" on the top for a long time, wait for a few minutes, and gently brush with the special cleaning soft brush of the ceiling, and then use a wet towel to wipe. Shizhuo.

    Do not use other stiff brushes, otherwise it is easy to fall off. Suede-topped hail sheds are a bit difficult to clean, and it's right to use foam cleaners, but be sure to buy them right (preferably the dry ones that wash fabric sofas, the ones that will clot dust into beads when sprayed). Then vacuum it up.

    For stubborn stains on the source potatoes, it is better to spray foam repeatedly to scrub them, and after they are cleaned, use another piece of clean cotton cloth to smooth them out in the direction of the fluff on the roof to restore their original appearance.

Related questions
30 answers2024-06-17

It is necessary to apply the film.

Car wraps. Auto film is a film on the front and rear windshields, side windows and sunroofs of the vehicle, and this film-like object is also called solar film or explosion-proof heat insulation film. >>>More

4 answers2024-06-17

Hello, the current number of people consulted may not reply in a timely manner, if it is a vehicle failure problem, it is recommended to use the computer to detect the specific cause of the failure, search for "car master" can consult car problems at any time, 24 hours ** answer.

15 answers2024-06-17

In fact, it is the external spoiler of the body, and the car surround is a popular name. >>>More

3 answers2024-06-17

Automobile body structure is an important part of automobile manufacturing, and its design and manufacture are directly related to the performance and safety of automobiles. According to the different characteristics of the structure, the car body can be divided into the following types. >>>More

22 answers2024-06-17

Automobile body materials are generally steel plate and carbon fiber. >>>More