Ready to customize your wardrobe, what material should you choose?

Prepare a custom wardrobe and choose a solid wood material. Scrap board is one of the most widely used sheets in custom wardrobes. Many people also call it solid wood particle board or particleboard.

In addition, there is not only one type of plate, which can be divided into domestic and imported. Of course, imported ones are also expensive, and imported ones such as Egger Board and Northburgh are also well-known. Multi-layer solid wood panels are more waterproof than particle board custom wardrobes.

Therefore, it is recommended to use multi-layer solid wood for custom cabinets, which are more likely to deform when using wardrobes. As for environmental protection, the kind of custom wardrobe made of glue is not very environmentally friendly, and it is more durable to choose well-known brands.

1.The formaldehyde content of the plate is directly determined by the glue content of the plate. Nowadays, many processing plants use glutinous rice glue or potato flour glue to bond the board to minimize the formaldehyde content.

There is a certain amount of moisture in the air in the bedroom. In the early stage of the selection of the plate, special attention should be paid to the moisture-proof performance of the plate, which will affect the stability of the plate structure. The nail grip of the wardrobe board is also very important, and the nail force of many boards is not as good as people think.

In the later stage, once the wardrobe is moved, it is easy to loosen.

2.Cherry wood is a common material used to make solid wood furniture, and it can also be used as a material for custom wardrobes. Its texture is delicate, soft and clear, with a certain decorative effect, which can give people a feeling of being close to nature.

At the same time, it also has good strength and vibration resistance, and has a long service life. Straw board is one of the most well-known environmentally friendly materials in the industry. It is mainly made of crop straw waste and has good dimensional stability, flame retardancy and moisture resistance.

Compared with traditional wardrobe materials, it has obvious advantages in decoration and processing.

3.Professional custom wardrobe manufacturers use precision cutting saws to cut plates, and there is no chipping around the plates. After edge banding, it can effectively prevent moisture in the air from penetrating into the inside of the board.

Some manufacturers do not have professional equipment, and the surrounding cutting is rough and the edge collapse is obvious. The above is the answer to the question of what material is more suitable for preparing a custom wardrobe.

When choosing, you can choose to use particle board material, or you can also choose to use stainless steel, or you can choose to use plastic material, and the customized wardrobe can play a convergent effect, and it is also more wear-resistant.

You can choose retro solid wood, or you can choose solid wood paint-free board, which is very environmentally friendly, and you can get a good moisture-proof in life. Most people probably use particle boards.

You should choose MDF, particle board, or solid wood board, or man-made composite board, which are more suitable and strong, and you can choose according to your budget.

The best wood, such a wardrobe is very strong, can also play a role in moisture-proof, especially suitable, very beautiful.

Solid wood is better, because this material is not easy to deform, there will be no mold inside, and there will be no peculiar smell when you put it in the clothes.

Wood. Because the wooden wardrobe is very durable and does not make abnormal noises, I think it is more appropriate to choose wood.

To buy any building materials, you must first understand the algorithm. There are two algorithms for custom wardrobes, one is calculated according to the area, and the other is calculated according to the projected area (also called the area of the hole). The area is to flatten all the plates that make up the wardrobe to calculate the total area; The projection area is calculated according to the projection area of the wardrobe on the wall.

There is no doubt that the unit price of the projection area must be higher than the area, solid wood particle board: although its name contains the word "solid wood", but it is actually a kind of man-made board, it is actually made of some wood core, bark, branch wood, small diameter wood, thinning wood, etc.

Space design (take the front sock cabinet as an example). Some decoration companies play gimmicks, wardrobes only cost a few hundred yuan, but the actual sample you see is just a basic wardrobe with a frame - 1 layer of hanging clothes, 2 layers of stacking, and at most a bottom drawer. When you say to him:

Hey, this doesn't work, why don't you have shelves, no underwear storage grids, no trouser hangers, ......At that time, fiberboard, also known as MDF, is divided into low, medium and high density boards, which is a kind of wood-based board that is formed by hot grinding and sizing of plant fibers. The advantages are that the surface of the fiberboard is smooth and flat, the material is fine, it is convenient for modeling and processing, and it is relatively cheap, and the disadvantage is that the nail holding force is poor and the moisture resistance is poor.

It is made of wood or plants crushed and pressed, with uniform density, easy processing and high strength. At the same time, its ** is also relatively low, so the cost performance is quite high. However, it also uses many adhesives in the production process, which is not environmentally friendly.

Moreover, it is easy to absorb water, and the moisture-proof performance is relatively poor.

30,000 can make about two wardrobes, a hall cabinet, a tatami mat (including tatami mats, wardrobes, desks), each ** is different, it is recommended that you go to the local consultation, this cost is Hollywood wardrobe **, China is the best, and Sophia a level.

At this time, it is necessary to choose solid wood boards, because solid wood people are more cost-effective than those who make boards, and they are also more valuable, and they are also safer, and they are also relatively stable, and then the first trace balance of bearing capacity is also relatively strong.

We should choose the eco-board. Because the eco-board is more environmentally friendly, the formaldehyde content is particularly low.

Wooden ones should be chosen, because they are very moisture-resistant, and they will also have a particularly good smell.

The material of the custom wardrobe directly affects the service life of the wardrobe, and the custom wardrobe mainly uses the following types of boards: 1. Particle board, which is a wood-based board made of broken solid wood into granular, and then pressed by adhesive, because the substrate itself is also evolved from solid wood, the nail holding force is strong, and the cost is relatively low, but the cost performance is very high, so this material is widely used in the manufacture of wardrobes. 2. Blockboard, the surface of this board is very smooth and flat, and it is also very good in terms of stability, and it is easy to deform without regret, and it is often used to make the frame of the wardrobe.

3. Shun core board, using the trembling poplar in the northern forests of Canada as raw materials, the use of environmentally friendly glue to collapse the board, not only strong and durable, but also very ring, is the best material for making wardrobes. For more information about what material is good for custom wardrobes, enter to see more content.

When customizing a wardrobe at home, you need to choose the best material. How to choose the material of the custom wardrobe? PChouse will take you to find out.

1. Look at the material of the plate.

The method of judging is from the section of the board, the fine fibers in the MDF are tightly combined, the density is large, the glue content is more, and the environmental protection coefficient is low, while the particleboard is composed of small particles of logs, the organizational structure is intricately crossed, the nail grip is strong, and the service life is long.

2. Look at the substrate of the plate.

As long as the content of free formaldehyde in the board is 9mg 100g, it is the E1 environmental protection standard, and such a plate is not harmful to human health.

3. Look at the veneer.

Some custom wardrobes, although the surface looks good, but as long as you use a fingernail lightly, you can scratch obvious scratches, and these custom wardrobes are often used in the market low-cost wardrobes often used on the surface of the polyflor paper, gorgeous paper plates, such wardrobes have poor wear resistance, because good custom wardrobes are generally used in dip paint, thick thickness and high temperature and high pressure treatment of environmental protection melamine veneer, high surface strength, wear resistance and scratch resistance.

4. Look at the edge banding of the plate.

We also have to know that a good custom wardrobe uses precision cutting saw to cut the plate, there is no collapse around the board, after the edge is sealed, it can be a good way to avoid the water in the air from invading the inside of the board, some manufacturers have no professional equipment, the cutting is rough, there is an obvious collapse around the edge, and some even cut corners, only do the edge banding in front of the plate, the non-edge banding surface is easy to absorb the moisture in the air, causing the plate to expand, resulting in the deformation of the wardrobe, and it will directly affect the service life.

What kind of material should I choose for my wardrobe? Let's take a look!

What kind of material is suitable for the wardrobe? There are four types of materials used to make wardrobes: blockboard (which can be found in white dwellings, and needs to be painted later).

fretboard (among which fir fretboard is the best, and it should be painted in the later stage); The wardrobe is suitable for lacquered board and MDF (also known as medium fiberboard, which is easy to deform when wet, and is suitable for cabinet doors. Solid wood particle board (particleboard, moisture-proof, good grip, not easy to deform, is the preferred material for making wardrobes) The material of the wardrobe is divided into fingerboards (fir fingerboards are the best, oak fingerboards are also good, and they should be painted in the later stage). It is best to choose a slender woodworking board for the wardrobe (more than 100 yuan for the white-eyed groove surface, more than 2 square meters per piece, and paint in the later stage); The wardrobe can be used without a blackboard (** similar to blockboard, with a single color.)

MDF (also known as medium fiberboard, moisture is easy to deform, cabinet door is suitable).

The choice of high-density board for wardrobe is a commonly used wood-based board, wood, eggplant, etc. are crushed and processed after soaking in water, with uniform density, high strength, and easy processing, but the disadvantage is that the moisture is not good, and wet places such as cooks cannot be used. It's not bad to make a wardrobe. As the name suggests, solid wood particle board is made of solid wood into pellets, and then pressed with glue to maintain the physical characteristics of solid wood, good grip, light texture, and will not bring too much pressure to the wardrobe.

Capacity selection. The capacity of the wardrobe should be very considered. Too small to fit clothes.

After all, thick clothes in winter really take up space, but if it's too big, the remaining space in the bedroom will be very small, and it will be very inconvenient to move. In fact, let me give you a simple example. Generally, a house of three needs at least one large wardrobe to hold all the clothes, but generally speaking, a large wardrobe can only hold everyone's clothes, which is basically not enough.

So, when we customize our wardrobe, we do it as wide and as high as possible!