What kind of board is good for custom wardrobes? Do you have any good plates?

Made from natural wood, the solid wood panels are extremely environmentally friendly, stiffer and more stable than other materials, feel good in the hand, and regulate the temperature and humidity of the room. But it's a lot higher.

Solid wood is good, there is no formaldehyde in solid wood, some wood also has wood fragrance, which is good for sleep, rosewood is good, but also pay attention to the size, first measure the location of the door and the room

Customized wardrobes have multi-layer boards, particle boards, MDF boards, toothed boards, etc., and the most used for buying boards for processing is the toothed board, and the back plate is used for multi-layer boards.

Directly choose the watermelon aesthetic deodorant board, and on the custom wardrobe, you can give a good plan, which is deeply loved by users.

What kind of board is good for custom wardrobe, and is there a good board? Personally, I think that it is better to use those solid wood panels for custom wardrobes, and it is more reassuring to make wardrobes like this kind of boards must be environmentally friendly.

You want to customize a wardrobe. I want you to believe in some good material. You choose a platform, it's the shogunate's real.

It is a board made of wood or lignocellulose as a material and hot-pressed with an adhesive.

Custom wardrobe board type: 1. Solid wood board. 2. Multi-layer solid wood board.

The veneer or thin wood cut into wood breaks and formed by hot pressing and bonding is also known as plywood. Since it is a multi-layer structure, it has a stable structure, high hardness and strong load-bearing capacity. However, the fatal flaw is poor toughness, easy to bend and deform, especially when making cabinets with a height of more than meters, the longitudinal stretch is too large, and the probability of deformation is very high.

3. Particle board, which is made of wood or lignocellulose as a material and synthesized by hot pressing of adhesive. Because of this, its production cost is very low, coupled with the good stability and durability of the plate after pressing, so it has become the first choice for many custom wardrobe brands.

4. Ecological board, a kind of board with fir wood as the core and melamine veneer, is also called melamine board and paint-free board on the market. Because it only pastes a layer of wood grain veneer paper on the surface of the wood, it uses less glue, so it is not too polluting and has a high degree of environmental protection.

5. MDF, a board made of wood fiber and glue, has low production cost but poor environmental protection, and the only advantage is that it has good toughness, is not easy to deform and crack, and is very suitable for cabinet doors.

There are many boards for wardrobes, and the advantages and disadvantages of different plates are also different, so in the end, which board is suitable for making a wardrobe, Xiaoye feels that as long as it is environmentally friendly and acceptable in his own economic situation, it can be used to make a wardrobe.

1. MDF.

Custom wardrobe selection of MDF, ** relatively speaking, it will be much cheaper, MDF can be divided into high-density board, MDF and low-density board according to the density, this kind of board is relatively used with a lot of glue, relatively not so environmentally friendly, but also easy to deform, so custom wardrobe do not choose MDF, waste money!

2. Particle board.

Now most of the custom wardrobe merchants are using particle board, particle board is also called solid wood particle board, particle board, generally domestic and imported, such as imported particle board has EGGER board, Kronose these more famous boards, and domestic particle board is generally E1 grade, and imported particle board, such as EGGER board is Japanese F4 star, so if you want to choose particle board, it is recommended to choose imported EGGER board.

3. Multi-layer solid wood.

Multi-layer solid wood board is also called plywood, this kind of board is relatively better than particle board, MDF waterproof effect, generally used in the cabinet more, and used in the wardrobe relatively less, used in the wardrobe, relatively easy to deform a little, as for environmental protection, this also depends on what glue the manufacturer uses, if you want to choose multi-layer solid wood board, it is recommended to choose a more famous brand.

4. Solid wood. If the custom wardrobe is made of solid wood, it is much more expensive, basically several times that of the board, different wood species are different, such as rubber wood that is cheaper, and the more expensive is pear, when customizing solid wood wardrobes and solid wood furniture, you should ask whether all the boards are solid wood, don't fool the merchants, drawers and backboards do not use solid wood, and directly use boards.

The introduction is as follows:

1. Blockboard, also known as large core board, is made of a core spliced with strip-shaped logs, and then pasted with thin wood veneer on the outside. The moisture content of blockboard is not high, the surface is flat, no warping, no deformation, and no blistering, which is an ideal material for interior decoration and high-end furniture production. It is characterized by good nail grip, firm quality, high strength, sound absorption, heat insulation, etc.

2. Particleboard is a man-made board made by cutting wood and other raw materials into pieces of a certain specification, drying them, mixing them with adhesives, hardening agents, and waterproofing agents, and pressing them at a certain temperature. Particleboard has a uniform structure and good processing performance, which is a good material for making furniture of different specifications and styles.

3. MDF, also known as fiberboard, is a commonly used wood-based panel, which is mainly made of finely crushed wood fibers through high temperature pressing. The surface of MDF is smooth and flat, the material is fine, the performance is stable, the impact is resistant, easy to process, and the application is wide. However, the disadvantage is that the moisture resistance is not good, and it is easy to expand and deform when exposed to water, so it is not suitable for kitchen and bathroom cabinets.

4. Solid wood particle board is a relatively new environmentally friendly substrate, which is produced according to the process of particleboard, which has the essence of natural wood and is relatively high-grade and environmentally friendly; The processing performance is similar to that of particleboard, and it has the characteristics of heat insulation and sound absorption. However, its process is relatively simple, so the quality difference is large, it is difficult to distinguish the good and bad products, and its bending and tensile resistance are poor, which is not suitable for making large cabinets.

5. Solid wood multi-layer boards are mainly made of three or more layers of one-millimeter solid wood veneer or thin board by glue hot pressing, and the material of the core of the board is mainly poplar, miscellaneous wood and amine wood, etc. Solid wood multi-layer board has high strength and good stability, but has a large glue content, so it is necessary to do a good job of edge sealing treatment during construction to reduce pollution.

6. Paint-free board, also known as ecological board, has good stability, strong anti-deformation ability and strong nail holding force. Because the paint-free board is environmentally friendly and paint-free, it is conducive to rapid and environmentally friendly decoration, and can be used in cloakrooms, closets, wardrobes, cabinets and other decoration furniture.

1.Ecological paint-free board.

This type of board does not need to be painted, so it has excellent resistance to wear, stain, moisture and deformation2Hexiang board.

It is made of crop straw scraps as the basic material, and then adds various additives, and is made of high-temperature hot pressing, with a smooth and stable surface, good performance, and can absorb sound, heat insulation, and flame retardant.

Solid wood is the best, and the home environment must be made of safe materials.

In fact, particle board is also a kind of particleboard, which is mainly composed of wood and some other wood fibers mixed into slag, combined with adhesives, and pressed at high temperature. To install a wardrobe, there are not many boards that we commonly use, the most important ones are particle boards and ecological boards. So which plate is better?

The following questions are used as an example to answer the question of wardrobe plate selection.

The inside of the particle board is wood chips, and the eco-board is solid wood slats. It is generally believed that environmentally friendly eco-boards are better. 3.

The cost of making particle board is low. It is mainly produced from wood chips. There are also good brands for environmental protection.

This is the advantages of the production process ecological board imported from Europe, with many colors, easy processing, environmental protection E0 level, suitable for making cabinets, whether it is customized or woodworking on-site cabinets, the first choice is ecological board.

MDF is mainly used as a door panel, and the advantages are that the board is stable and not easy to deform, and can be carved arbitrarily to make the pattern you wantThe inside of the particle board is crossed into granules, and its flakes are paved in a directional layer, so the strength is high, but the disadvantages are also obvious, such as the flatness is not as good as the ecological board, it is more difficult to do other shapes, and the most important thing is that the formaldehyde content is high, and it contains a large dose of industrial glue.

Then why is there no manufacturer to crush the mahogany nanmu into particle board and then make furniture, rich people can consume mahogany nanmu that can also consume a mahogany particle board, but no factory has done so, why, no matter how stupid people should understand the cat here is tired, ** much more expensive than the ecological board, and Hexiang board, that is, the particle board with vegetable glue, and then the current parquet, Ya is a high-density board, you say that it is not much glue. The glue content is only a part, not that the high glue content is not good. Eco Board:

To put it simply, there is a solid wood plank in the middle, such as fir or Malacca, and a veneer layer on both sides. The amount of glue is minimal when the middle is glued. Particle board:

It is all made of sawdust and glue pressing, and the degree of environmental protection is clear at a glance.

When customizing a wardrobe, it is better to choose particle board. This is mainly due to the low cost of particle boards and the fact that they are environmentally friendly.

Pure solid wood, because this board contains less formaldehyde, more environmentally friendly.

1. Solid wood particle board: This kind of board is relatively stable, not easy to expand, has a long service life, and the internal formaldehyde content is also very low, which is less harmful to the human body. 2. MDF:

This kind of board is also more environmentally friendly, and the surface is relatively flat, but its moisture resistance is relatively poor. 3. Solid wood multi-layer board: this kind of board is not easy to deform, the hardness is very high, and the waterproofness is also good.

4. Finger jointing board: It is sawn into a zigzag shape at the edges of the two plates, and then spliced together with glue, and there will be no harmful substances to the human body in the production process, and there are still more people who choose it. 5. Fir plank:

The service life of the fir board is long, the surface is relatively flat, the decoration is also good, and it is also very cheap, which is a better board.

Now there are many boards on the market that can be used as wardrobes, and I think it is more environmentally friendly to use solid wood ecological boards.