Home decoration, is the cabinet made of carpentry better than the whole house customization?

Carpentry cabinets, the key is to pay attention to easy to use, the style is relatively old, and it can be made without a design scheme, and the price will be slightly lower. The whole house furniture customization is a personalized customization category, which can complete the design scheme according to the customer's preference, different materials and the utilization rate of all areas, and its modeling design style is rich and diverse.

The difference between the two depends on the way there are some differences, if the selection of carpentry cabinets, it is very likely to fully consider the cost of the problem, please some carpentry masters first select raw materials, and then clarify the style and function of the wooden cabinet, it is very likely that its style is relatively old, without the design scheme can be made, so the overall price will be slightly lower.

However, the selection of whole house furniture customization can be based on the customer's preference, different materials and the utilization rate of all areas to complete the design scheme. The key is that there is a design plan step in the early stage, and then it is made into different cabinet furniture, and it has a variety of design styles.

The whole house furniture is customized, which is produced according to the machine, and the carpentry cabinet is made by hand. And generally it is made on the spot. Choose the whole house furniture customization, more raw materials, environmental protection and durability, the design plan is more decorative, but the price is more expensive than carpentry cabinets.

Whole house furniture customization is indeed quite good, but its advantages and disadvantages are also very obvious. Let's talk about its advantages first, the first is that the solid wood furniture it is planned out as a whole will be more and more supporting facilities, which is better than the traditional office furniture in terms of beauty and applicability. The utilization rate is also incomparable, it can be integrated with the design and production of each home room type, so as to achieve the actual effect of the overall home decoration.

But the shortcomings are more prominent, and they are also more expensive. In the early stage, the parts must be made and then sent to the homes of the owners of the community to carry out assembly. Therefore, its quality is partly due to the production of the board, and on the other hand, it also lies in the overall level of assembly of the workers on the spot.

If you want to be convenient, do not want to operate on the spot, and the budget for economic development is abundant, then you can choose the whole house furniture customization, and the actual effect is quite good.

It's comparable. I think it's more cost-effective to let the carpenter make the cabinet. In the decoration, some people are entangled in whether to use the cabinet made of carpentry or to customize the whole house.

Both have their own advantages and disadvantages, but I think it's better to have a carpenter make the cabinet. The material of the cabinet made of carpentry will be better.

What's the difference?

1. From the speed of construction.

If the cabinet door is not customized, it is made of paint-free board woodworking, and basically the whole house cabinet can be completed in 1-2 weeks.

2. From **.

The same quality of the whole house is higher than that of carpentry, and the whole house is customized per square meter (the length of the cabinet is multiplied by the height) with the cabinet door is twice as expensive as that of woodworking.

3. From the perspective of environmental protection.

Basically, it is almost the same, and the environmental protection level of the board is the same.

4. Visually.

Generally, whole-house customization is better than woodworking.

Comparable, the cabinets made by carpentry will be made of better materials, the cabinets made by carpentry are cheaper, and some carpentry masters are very skilled, and the cabinets they make can also be comparable to those made by machines.

In the process of home decoration, the cabinet made of carpentry is also very strong, and you can choose to customize the whole house according to your decoration budget, which looks more advanced, but it is also relatively high.

In the process of home improvement, choosing a cabinet made by carpentry on site or customized for the whole house actually has its own advantages and disadvantages, and the cost performance depends on your specific needs and budget.

The specific decoration of the house can be calculated here, just enter the area + city, calculate the decoration in 3 seconds, know the real ** in advance, and easily grasp the decoration company: [Click here, free decoration**].

First of all, the cabinets made on the carpentry site are more flexible and can be customized according to the actual situation of the house and the needs of the owner, while the whole house customization needs to be designed in advance, and once the design is completed, it is difficult to modify. In addition, the cabinets, materials and processes made by the carpenter site can be selected by the owners themselves, which is more transparent, while the whole house customization needs to rely on the manufacturer's standards, and there may be some hidden consumption.

However, the advantage of whole-house customization is that its craftsmanship and quality are more guaranteed, because it is produced in a factory, it will be more refined in precision and detail than cabinets made on site. And the installation speed of the whole house customization is faster, which is a great advantage for owners who are eager to move in.

On the site, the cabinets made on the carpentry site will vary according to the choice of materials and processes, generally speaking, between 300-500 yuan per square meter. The whole house customization ** is relatively higher, generally between 500-1000 yuan per square meter.

Therefore, if you have high requirements for the quality and craftsmanship of the cabinets, or are in a hurry to move in, whole-house customization may be a better choice. If you're looking for more flexibility, or are on a budget, then a cabinet made on-site by carpentry may be a better fit for you.

Finally, it is recommended to recommend our "Tuba Rabbit", Tuba Rabbit has 110,000 decoration companies and first-class businessmen in his hands, and the direct sales of building materials are affordable. Tuba Rabbit is selected for decoration, and Tuba Rabbit can accompany the signing of the contract for free, "decorate first and then make payment", reducing the worries of the owners. For more decoration information, welcome to visit:

Click to enter, professional customer service free consultation good company].

Good value for money.

The carpentry on-site cabinet must be lower than the whole house custom price. That's for sure. Some people say that ** is about the same, it must be a lie to you.

Carpentry cabinets are about 25% cheaper than whole-house custom cabinets. In fact, formaldehyde ** is only a matter of content in the wood board of this raw material. Another problem is that the environmental friendliness of a ring depends on its edge banding technology.

Many customers ignore this problem and only care about the wood board of the raw material itself, and do not care about her edge banding technology. The aesthetics of the custom cabinet must be better than that of the woodworking cabinet. This should also be true, because custom wardrobes can have color matching, including the combination of door panels and cabinet panels, and the color matching will be richer.

If it is a brand customization, generally speaking, the plate.

The degree of environmental protection is guaranteed to a certain extent, but the selection range of plates is small, and only a few plates can be selected from the brand offering. If we choose a small manufacturer, we can judge it based on their inspection reports and other consumer evaluations. Moreover, the whole house customization is an assembly line production, and mechanical edge banding is used, which is more environmentally friendly.

But in the end, whether the products in your hands are really environmentally friendly depends on the conscience of the manufacturer. Carpentry plays with cabinets require us to go to the building materials market to buy boards, and the choice is wider. And if you choose the plate produced by the plate brand manufacturer, the environmental protection will be more guaranteed.

However, you should still be cautious when choosing. If we buy a fake, it's also not environmentally friendly.

Carpenters now also use mechanical edge banding. Although it may not be as good as the assembly line, it should not be bad, but there is a risk of exploding, but the degree of environmental protection is relatively high. The quality of the wardrobe is mainly judged from the plates and hardware of the cabinet. There is not much freedom in the choice of custom panels for the whole house.

Judging from the comments on the Internet, there are more and more good and bad ones, so it mainly depends on your luck. The above is the answer to the question of home decoration, whether the cabinet made of carpentry is comparable to the whole house customization, and how cost-effective.

Nowadays, there are more and more items that need to be decorated at home, such as "cabinets", and more and more people don't know how to choose? I'm afraid that the carpentry is not done well, and I am afraid that the whole house customization is too expensive. Today, Xiaoye will introduce to you the advantages and disadvantages of the two, you can choose according to your needs.

Carpentry: 1, the material of the cabinet is assured, the choice of carpenter to build the cabinet, generally the owner chooses the material by himself, so the quality will be better than the whole house customization, and there will be no worry about the occurrence of "shoddy".

2. The cycle is short, the carpenter makes the cabinet on site, which will generally be completed within a week, and if there are many carpentry masters, the time will be shorter.

3. The edge of the cabinet looks good: the carpenter makes the cabinet on site, which can make it more compact, minimize the gaps, and make the edge look better.

4. Affordable: Carpentry on-site production is board + labor cost, no other intermediate costs are generated, which can naturally be more affordable and save decoration costs.

5. The style of the cabinet made of carpentry is relatively simple.

Whole house customization: 1. The style is better-looking: it can be combined with different color boards. At the same time, because it is machined in terms of modeling design, the appearance of the finished cabinet is very good-looking.

2. The edge of the cabinet is more refined: the whole house customization belongs to the machine processing, and the edge of the cabinet will be done very beautifully, and it will be more detailed in terms of closing.

3. Long customization cycle: The whole house custom cabinet basically takes 25-90 days, and the overall processing time is too long.

4. High cost: Whole house customization** includes materials, labor costs, transportation costs, design costs, etc., and the overall customization cost is higher.

5. The board is basically a particle board: now the whole house custom cabinets, most of them are particle boards, and the quality of the board is average.

The cabinet made by the carpenter is actually similar to the whole house custom, but the ** customized by the whole house is slightly higher. Personally, I recommend the cabinet made directly by the carpenter, ** has decreased, and it is also more practical and convenient.

I think it can be compared, and the quality of the cabinets made by woodworking is also very good, and it is particularly environmentally friendly; The value for money is also very high.

In fact, there is not much difference between the two, but there may be more small problems, for example, the carpentry may have uneven swings and cracks with the wall, but try to choose a more trustworthy carpenter; In fact, I think that due to the development of society, the cost performance between the two is about the same.

Carpentry to build cabinets, the speed is definitely faster than customized, carpentry on-site production cabinets will generally be along with the ceiling work, for most small and medium-sized apartments is ten days and half a month, and, if there is any problem, immediately found that it can be changed immediately. It is normal for the factory to customize for less than a month, more than 45 days, and it is necessary to wait for the ceiling to be completed before the size can be reviewed to start customization.

Carpentry is certainly not as good as the whole house customization, the customization speed is very fast, and it is very easy to communicate with the guarantee, carpentry is generally a person who does not understand many styles.

If it is a very reliable worker, the master also chooses his own materials are relatively safe, very good, can be designed according to their own preferences, and can make reasonable use of space, usually made quickly, only about a week can be completed, but to customize the cabinet door, about a month or so.