How to install a wall cabinet, how to fix a wall cabinet How to install a wall cabinet

In our lives, many friends will find that the home will become smaller and smaller, because there are more and more things in the home, so it seems that the home is getting smaller and smaller. Therefore, many friends are thinking about making use of the space at home, and after thinking about it, only space can be used, so many friends hang things on the wall, and with the development of the home improvement industry, the wall shelves.

Not only can the wall shelves make the most of the space, but the wall shelves are also very beautiful in terms of aesthetics.

Precautions for wall shelf installation

Uniform style

1. Unified style: Although the space of the shelf station is not large, its location is very prominent, so the style of the shelf must be unified with the design style of the whole space.

2. Convenient and practical: if you want to use a shelf to place the kitchen.

In the case of miscellaneous items, the shelves will undoubtedly need to be placed in the kitchen and be easily accessible.

3. Not complicated: Originally, the house knew that the space was slightly more because of the stacking of items, so from a visual point of view, it was better to choose a single shelf with a simple color and refreshing. Moreover, the place of placement should also be careful not to fill the entire visual space, leaving a little blank, which can cause a certain visual difference.

Principles for wall shelf installation

1) The installation of wall shelves should comply with the principle of convenience and practicality. When installing shelves, you must take into account the entire layout and daily habits, such as installing wall shelves in the kitchen, and consider installing wall shelves in a place where stir-fry can be easily reached.

2) The installation of wall shelves should comply with the principle of space saving. Kitchen and bathroom.

The room is a relatively small place in our family, so the installation of shelves must save space and make reasonable use of our space position. (3) The installation of wall shelves should be clearly classified. There are many types of wall shelves, and shelves with different functions can be installed in different locations in the home, so that they can "perform their own duties" to make home life orderly.

How to install a wall shelf

1) Measure the position that needs to be fixed with a pencil.

Make a mark; 2) Use an electric drill to punch holes and fix the shelves with screws and expansion nails.

Although it is not difficult to install wall shelves, if the installation is not properly placed, it will affect the whole room.

The aesthetic effect will outweigh the losses.

The above is to share with you in detail about the knowledge of the wall shelf, the wall shelf has become more and more important in our lives, many friends have installed the wall shelf at home, which greatly saves the space at home, and the wall shelf is also more complex in terms of installation, and it is also very particular, the above also shares the knowledge about the wall shelf in detail, I hope our sharing can help you better understand the wall shelf.

1. Determine the installation position of the wall-mounted cabinet Wall-mounted bathroom cabinet generally uses two screws to connect to the wall, so it is necessary to determine the position of the screws first. The location needs to be determined according to the height of the installation and the position of the nail holes in the cabinet, and the width of the cabinet from the side wall is determined according to the margin of the countertop. The tools needed to determine the installation location are mainly a tape measure and a color pen.

2. Use percussion drill to punch After determining the drilling position, you need to use percussion drill to punch holes. Plug the percussion drill into the power supply and make deep mounting holes in the marked locations. Note that before drilling, it is necessary to make sure that there will be no water pipes, electric pipes, etc. at the drilling location.

3. Use a hand hammer to load the rubber particles Before connecting the screws, you first need to install the expansion rubber particles in the screw hole, and the rubber particles can better tighten the screws. A hand hammer is used to hammer the rubber particles into the borehole.

4. Install screws to connect the cabinet and the wall After installing the rubber particles, connect the screws to the cabinet and the wall. Then the installer then replaces the drill bit with the percussion drill to install the screws, and drives the screws into the wall.

5. After assembling the handle After the cabinet is fixed to the wall, it is left to install the cabinet handle. The handle is easy to install, and the handle and screws can be fastened in a fixed position with a screwdriver.

How to install a wall shelf

1) Measure the position that needs to be fixed and make a mark with a pencil;

2) Use an electric drill to punch holes and fix the shelves with screws and expansion nails.

Although it is not difficult to install wall shelves, if the aesthetic effect of the overall living room is affected by the improper installation position, it will be more than worth the loss.

Nowadays, people have a lot of clothes and shoes and some large and small daily necessities at home, but these things are often scattered everywhere or not organized, so friends can I teach you a good way. Let's have oneLockers and wall installation DIYLearn about the pros and benefits of homemade lockers, and then see how to do it!

Lockers and wall installation DIYThat's all for the methods below, let's take a closer look!

Lockers and wall installation DIYThe first step is to make a steel frame.

1. The hole spacing of Wanming manuscript energy angle steel is fixed, and it can only be cut and cut from two resistant holes (using special cutting tools, there is no need to leave the size of the saw seam). Therefore, the original design dimensions should be rearranged. It was calculated that 12 angles with an original length of 3 meters were needed.

This angle has a special nut. The screws do not rotate in the band holes of the angles, so only one wrench is required for installation. First, make a box on the ground, set up a quadrangular column on the box, first pass through several beams, fix the column, and then put the top box.

2. Loosen the fixing screws a little so that the steel frame can have a certain amount of movement, and use the wall rail steel frame (maybe the guide rail is not completely vertical, but the space is good), the guide rail is very good. After that, tighten the upper and lower screws to shape the steel frame. Move the steel frame slightly and reinstall the beam according to the design dimensions.

Here's a little trick. This universal angle steel hole is fixed. It is not necessary to measure dimensions at any time during the work.

Lockers and wall installation DIYStep 2: Make the paneling.

1. The assembly of the steel frame with the steel frame is much easier than the direct use of wooden boards, but the difficulty is still a bit small due to the large size. First of all, make a mark on the part that needs to be punched and slotted, one thing to note about this steel frame is that the vertical column and beam are not on a flat surface, when the plate is mounted, there will be a gap of about 2mm between the plate and the beam. The solution is to add spacers between the plate and the beam when the screws are applied.

2. The back panel of the locker is not visible from the outside, and all the corners can be spliced and cut. This is another big advantage of using steel frame construction. If you don't use a steel frame, it is difficult to splice a pure plate type. Install the partition, which can be placed on the shelf, but if it is safe, tighten it with screws.

Lockers and wall installation DIYIt's a test of your handiwork, and you can learn it!

You can get it for free

Wall cabinets are also a good choice for home decoration, it has the advantage of not taking up space, but the construction needs to understand, the fixing method of wall cabinets?

When the wall cabinet is fixed, it is also framed on the wall. Then proceed with the installation.

At the beginning of the installation, the installation of the wall pendant in the kitchen was confirmed, and then the wall was drilled with a hammer drill. The depth of the hole is about the same as the length of the screws used later. Then, the expansion spiral hole will be carried out, and the action is to twist the middle nut by drilling the hole, so that the middle screw expands the outer pipe wall, squeezing the wall that was drilled out earlier, and it is difficult to fall off by friction, so that later the nail is more tightly attached to the wall.

After actuating the expansion bolts, the installer uses the flattening of the protrusions, the fixation of the wall cabinet and then the fixation of the hanger. For each piece of sling, the master uses an electric drill with two spikes to fasten.

There are four cupboards in the kitchen. One of the contact risers, the risers form a corner wall cabinet; One of the exposed air pipes. Therefore, the backplate was not installed, and the other two were assembled normally.

As mentioned above, the connector mounting holes have already been manufactured on the board provided by the manufacturer, so only the appropriate connector needs to be connected to connect the board during assembly. Whether it's a wall panel or a floor, the connections are similar and are usually connected by three connectors.

It can be more in line with the wall, so that the material and color (wallpaper or latex paint, etc.) of the outer side of the wardrobe and the adjacent wall can be unified, and then through the design of the ceiling and the color selection of the wardrobe sliding door, the wardrobe can be integrated with the whole space and look more harmonious visually. For example, the top and sides of a wardrobe can be painted with pink latex paint in the following cases:

It is easier to install a distracting wardrobe. We know that it is difficult for the ceiling and walls of a room to be completely straight, and the fixation of the wall cabinet closes when the wardrobe is closed. It is very difficult to create large or small gaps between the top and ceiling of the wardrobe, the back of the wardrobe and the walls.

The following situations: However, this problem can be largely avoided if a wooden ceiling and drywall wall are combined to decorate a recessed structure.

The fixing method of the wall cabinet also needs to be understood, so that the cabinet can be installed more safely.

You can get it for free

1. Prepare items such as drawers, fabrics that are larger than the inside of the drawers, dust-dyed materials, calligraphy, transparent glue, sponges, brushes, pie stove paste, electric drills, rollers and dyes. Then at the bottom of the drawer, glue the floral fabric tightly with paste to prevent the wood chips from the drawer from scratching the family.

2. Use a sponge to absorb the dye and dye the drawer back and forth in the same way as you would wipe away the stain. In planks and boards and joints, the color of the dye is more difficult, so it is necessary to carefully color it using the edge of the sponge. Once you've finished dyeing the drawers, you can install rollers in the four corners at the bottom.

3. Because of the wheels, the drawer can move freely and facilitate daily life. Placing the drawer storage cabinet under the bed can make better use of the space under the bed, and at the same time, it can also put the items that need to be stored under the bed in an orderly manner.

Decoration wall shelf is a very commonly used material in modern decoration, which can increase the aesthetics and practicality of the wall. However, it can be confusing for the average consumer not to install the device board. Here are some tips on how to install a decorative wall shelf.

Step 1: Prepare tools and ingredients.

Before starting the installation, you need to prepare some tools and raw materials. Tools include wall nails, screwdrivers, drills, rulers, pencils, and levels, among others. The raw materials needed include shelf board, wall gypsum board, pay-off board, corner line, glue, etc.

Step 2: Confirm the location.

Before installing the panels, it is necessary to clarify the location and number of installations. This can be determined according to the needs of the individual, drawing horizontal and longitudinal straight lines on the wall with a pencil, and then determining the spacing and height, according to these lines.

Step 3: Install the wall stone old-denier plasterboard.

Installing plasterboard on a basic wall can be screwed to the wall so that the board can be placed more robustly. It should be noted that the edges of the plasterboard need to be protected by a wooden frame or metal frame to prevent the board from falling off due to insufficient strength during installation.

Step 4: Install the pay-off plate.

The pay-off board is generally placed in a position that is relatively easy to shift. You need to put the pay-off board with a level first, and then fix it on the gypsum board with screws.

Step 5: Install the corner lines.

After installing the pay-off board, you need to install the corner line. This step requires tools such as woodworking saws and files, but it is not difficult to install. Just keep the corner line and the pay-off board in the same position, then draw the position of the line with an ink line, and then use a carpentry saw to cut the line.

Step 6: Install the object board.

After confirming the position of the board, you need to apply the back of the board with glue and place it in the desired position. The shelf is then fastened to the plasterboard with rivets. During the installation process, it is necessary to confirm whether the board is level with a level.

Install a pay-off board and move to the next location after installation until it is all done.

To sum up, it is not difficult to install and decorate the wall shelf, you only need to place it accurately and prepare all the necessary tools and raw materials in advance.

Many people like to buy some custom wardrobes, cabinets, or build their own homes when renovating their homes, and then fix it on the wall. However, it takes some skill to fix the cabinet to the wall. Because cabinets collapse every year, there are many unnecessary accidents, so if you want to fix the cabinet on the wall, safety is the most important.

Today, I will tell you how the cabinet Chi Weizi is fixed on the wall.

1. There is a special glue, if the volume of the cabinet is not particularly large, we can use glue to paste the cabinet on the wall, of course, glue on the back panel, so that the cabinet and the wall can be closely combined.

However, there are some disadvantages, that is, if you use some inferior glue, it will emit harmful substances, such as formaldehyde will exceed the standard, affecting the health of your family. It is also important to note that glue also has a certain service life. After a long time, the glue effect will be greatly weakened, and there are certain safety hazards.

Therefore, if you choose this method, you must consider the quality of the glue and be able to ensure its timeliness.

2. Use the iron triangle, but the weight of the cabinet is not too large or too heavy. If this requirement is met, the cabinet can be firmly fixed to the wall, and it is generally relatively strong.

3. Nail to the wall, there is a disadvantage that it is not beautiful enough, and it is not too strong, if you want to use this method, you still have to consider the bearing capacity of the nail.

4. Expansion screw, it can nail the cabinet to the wall very well, and it is relatively firm.

5. Fix it with a hanging code, its cohesion is still relatively strong, and it will not be trapped by the accident of Pearson's fall.

2. Precautions for installing cabinets.

1. Considering that the cabinet will be in danger of tipping, an anti-tipping device should be installed when installing the cabinet, even if the child climbs, this kind of cabinet will not collapse easily.

2. When choosing cabinets, we must pay attention to environmental performance, because the formaldehyde content of furniture is the most important consideration. After all, health is the most important thing in any situation. After installation, be sure to ventilate.

The above points are about how to fix the cabinet on the wall and the precautions for installation.