How Huawei P40 returns to the previous level

Huawei P40 mobile phone to return to the previous level, you can tap the back button in the navigation bar at the bottom of the screen, which is the virtual key of the triangle.

The phone has a left-pointing arrow on the top of your screen. It will go back to the previous level, and that's basically how it works. You can give it a try.

The screen in the lower right corner of the Huawei phone is actually not displayed, but when you slide your finger from the bottom to the top, there will be a small light spot at the bottom of the screen, and that small light point is the back button, you know that you can click on it.

You can use the virtual buttons in your Huawei phone to go back to the previous level or go back to the main interface.

If you go back to the previous level, you can just swipe up in the bottom right corner of the screen, because it's usually a shortcut now.

The general situation is that the screen slides to the other side, it should be slid to the right, which is to restore the original previous step, or there is that Xiaoyu number is also to restore the upper level.

If the phone returns to the previous level, you need to see how the mobile phone sets up the navigation bar, if there is a navigation bar at the bottom of the lower side, then click on the triangle symbol to return to the previous question, if it is a hidden navigation bar, then swipe left and right to return to the previous level.

If you want to go back to the previous level, just click on the triangle symbol in the navigation bar below.

If it's not like this, it's a virtual kind of return button, then you just need to slide from the left and right ends of the screen to the middle, and you can go back to the previous level.

HUAWEI P40How to return to the previous level,There is an arrow directly in the guide key to return to the previous level。

Huawei P40How to return to the previous levelRegarding this problem, you can directly click its backspace key,Or if you turn on the sliding mode,You can also swipe the screen directly to the left。

Huawei P40,If you want to go back to the previous level,We can go back directly,Press the back button directly。 Shortcuts are all available.

Huangwen P40 returns to the upper level, and pulls it in the opposite direction from the left or right border to return to the upper level.

You can set up on-screen navigation or floating navigation, press back, and gesture navigation is to swipe from left or right.

As far as the description is concerned, this asks. There are three modes of operation. It depends on which one you choose. One is the previous kind of Android, the other is the fruit, and the last one is oneself.

If you see no icon, there's a back button in the top left corner.

I don't know how to continue asking, satisfied.

Going back to the previous level, I generally use the navigation bar, but I can also use gestures to swipe left and right.

He returns to the previous level the same as other mobile phones, and if you don't operate it well, you can adjust the virtual button to the desktop.

Go straight back to the desktop.

Or swipe right. That's it.

1. In the case of using gesture navigation, swipe inward from the left and right edges of the screen to return to the previous level.

2. In the case of using the three buttons on the screen to navigate, click the back button of the triangle to return to the previous level.

3. In the case of using hovering navigation, click on the hovering ball to return to the previous level.

When using mobile phones, many full-screen models are operated by gestures. When operating, many people can't find how to get the exit return button. The phone exits the back key settings.

Tools Ingredients: Huawei P40, EMUI Local Settings 1, After entering the phone, tap the icon of settings to enter.

2. In the settings, click on the option to refer to hail system and update the disturbing wax.

3. Select the option of the system navigation key to enter.

4. Select the option of three-button navigation on the screen.

5. After setting, the exit return button will be displayed at the bottom right of the slow slide.

HUAWEI P40 mobile phones provide full-screen gesture mode and virtual navigation bar mode (including back button), and the phone defaults to full-screen gesture mode, so you need to change the operation mode in the system settings to set the back button. Here's how:

1. Open the Settings menu of your Huawei P40 phone, scroll down to the bottom and select System.

2. Open the [System Navigation] option in the [System] menu, and click to select [On-screen Three-button Navigation].

4. If it shows that [Three-button Navigation in the Screen] has been turned on in the settings, but the navigation key does not appear at the bottom of the screen, it may be that the user has set the auto-hide function, and you can try to swipe up from the bottom of the screen to resume the display.

Huawei P40 back button in **Settings? First, open the settings and check to see if there is any software and updates. If so, click in to find the system navigation method and set it.

Huawei usually uses the mobile phone navigation method, if it really doesn't work, then enter the navigation method in the box. The system navigation method can be found and set up.

This return key is very simple, you can go directly to the navigation bar, and then set a return key, so that you can get it directly.

How to set the back button of Huawei P40;

1. Enter the settings interface of the phone and slide to the bottom position.

2. Click [System & Update] to open the settings.

3. Click [System Navigation Mode] on the interface that opens.

3. Select the three-button navigation and click the circle behind to select.

5. Set it to a three-button navigation at the bottom to click and use the return button.

Judging from your description, the back button of the Huawei P40 is at the bottom of the phone, but it has to be called up in the phone's settings, and its setting method is:

1. After opening the desktop of your Huawei phone, find and touch Settings on the desktop.

2. On the settings page, click to open [System].

3. After entering the system page, click to open [System Navigation Mode].

4. Then check the [Three-button Navigation in the Screen].

Where is the back button for Huawei P40? Its return button is directly at the bottom of the screen, and there is a triangle symbol in the guide room, which is its return button.

Huawei P40 does not have a back button, if he wants to go back, you can swipe the left or right edge of the screen to the middle.

The return button is usually located in the lower right corner with a small triangle, which is the return button. If you don't want to go back, you usually just swipe up from the bottom of the screen.

Huawei's back button should be right below, you can go into the settings to find the way you want, and then set it to the page, and you can display that back button on the page.

The return button of this mobile phone is actually not, it is actually to withdraw the app and exit the phone directly to slide up, and then you can exit the app, so this mobile phone does not have the virtual return button.

Huawei P40 phone, its back button is at the bottom right of the phone. It is a hidden top.

After opening the desktop of your Huawei phone, find and touch Settings on the desktop. On the settings page, click to open System. After entering the system page, click to open System Navigation Mode. Then check the [On-screen Three-Button Navigation].

Now many of Huawei's mobile phones don't have a direct return button,If you don't set it directly,It won't appear in the lower part,Generally, you can drag it from the left and right sides to return to the next interface。

Go to your phone's settings interface and slide to the bottom.

Click on System & Update to open the settings.

On the interface that opens, click [System Navigation Mode].

Select the three-button navigation and click on the circle behind it to select.

Go back to the key settings on your HUAWEI P40 phone, click to enter the settings option of your Huawei phone, and set the virtual buttons in the smart settings to display them on the desktop of your phone.

The back button of Huawei mobile phones can be directly selected to return by pressing the home button in the middle of it to clear it or to add a back button to the hovering ball.

The back button is set by yourself, directly click on the selection of the navigation key in the settings, and set it according to your preference.

This is to click to exit, there will be a small icon on it, just click on that.

The back button of Huawei mobile phone P40 is in**Ah? I think he might be in full-screen mode, and he should have swiped inward on the left and right sides of the screen to go back.

If you have a new phone, it is not turned on by default, and you need to turn on the navigation key in the settings.

Under normal circumstances, the back button is to swipe left and right to go back, and now mobile phones are like this.

Some of his cases are hidden functions, which you can set in the settings, and some are virtual buttons.

If the Huawei batch of vehicles is the return button,We can also swipe left and right or swipe from left and right through him,You can set the full screen or navigation key。

The settings of the back button are adjusted by yourself by entering the system navigation mode of the mobile phone to set up the accessibility function.

Turn it into a P40 return button in this, there is still a lot in it, I like Huawei P40 very much, because after I bought AP 40, I think it's all very good, and of course the coin can be picked up when the work starts.,After you pick it up, it's not a legend to use it yourself.。

Huawei P4The back button is really hidden,Click on the screen to make it clear.。

Qt automatically returns the key there for a specific way as well as some for a specific way.

If you want to use this return button, you can set the position of the return button yourself.

How to set the back button for Huawei P40Pro.

1. First of all, we open the desktop of Huawei P40Pro mobile phone and click Settings.

2. Click System & Update.

3. Click on the system navigation mode.

4. You can choose gesture navigation or on-screen three-button navigation, and you can successfully change the return key after the change is completed.

Huawei P40 is equipped with the Kirin 990 5G SoC chip, which combines the processor and baseband into one, and innovatively designs the CPU three-level energy efficiency architecture, 16-core GPU super cluster, energy efficiency and transistor density, faster speed, lower heating, support for more full 5G frequency bands, and enjoy high-speed 5G networks for global travel.

The P40 series supports 160MHz Wi-Fi 6+, and the theoretical air interface rate can be up to it.

HUAWEI P40 uses an inch flat screen, with a rear triple camera module, providing "Bright Black", "Deep Ocean Blue", "Frost Silver", "Dawn Gold", "Zero Degree White" Five colors are available.

The return key of Huawei P40 is a virtual return key, and now many mobile phones have a virtual return key without a physical return key.

You can enter "Settings", search for "Gesture Navigation", click on the top option, and then you can modify the system navigation method. The next three-button navigation on the screen has a back button.