Ask for advice for two minutes, and you can t enter the safe mode

1.Incorrect memory insertion or memory error [dead pixels].

Pull out the memory under the power failure, wipe the gold finger clean, plug in and start the machine to try, if it is still restarted after self-test, the memory has a dead pixel.

2.Check the keyboard to see if the shift or F8 keys are stuck, which may cause the problem you said! If you have a keyboard at hand, try it out.

3.Right-click on My Computer Properties Advanced Boot & Recovery Settings to display the operating system list, adjust the time a little longer, and then press F8 when the operating system is selected when booting up, and you can see the safe mode option.

Or as soon as the machine is turned on, it will keep pressing F8, not pressing, but pressing.

4.Try uninstalling the antivirus software first.

5.Try pressing F12 or F10, some computers are not F86Use the round-mouth keyboard instead, and press and hold F8 after powering it on, and you will definitely be able to enter safe mode.

7.It's really not possible to find a professional to repair it or find after-sales service.

In the Trojan horse, it is recommended to format the whole disk, reinstall the system, Lenovo has a one-click restore can also be. In addition, if you need to go to the trojan**, it is recommended to use a virtual machine, so that the computer will not be poisoned, the virtual machine is poisoned, you can delete the virtual machine system directly from the disk, and then install the virtual system, which is very convenient. If you don't understand, leave a message in my space.

You uninstall the antivirus software and use 360 to optimize all the startup items and see what happens.

If you cannot enter the safe mode by force restarting three times, you can enter the safe mode by restarting as follows:

1. Tools Raw Materials:

Huawei MateBook 15, Windows 11, "Safe Mode" feature.

Second, the specific steps:

1. Click the "Win" icon in the lower left corner of the desktop, then click the "Power" icon, press and hold "Shift" on the keyboard, and then click "Restart".

2. After the computer restarts, go to the following page and click on the "Troubleshooting" option.

3. Then click on the "Advanced Options" option.

4. Click on the "Start Setup" option on the advanced options page, and then click on the "Start Setup" option.

5. Next, click the "Restart" button in the lower right corner.

6. After the computer restarts, the startup settings page appears, 4 is to enable the safe mode, press F4 or the number key 4 to enter the safe mode.

Summary. It's like this when you turn it on.,The security mode can't get in.,Ask the god for guidance.,Kneel and thank.。

Hello dear, digital signatures cause the security mode to not enter.

This problem is relatively easy to solve, because the security mode also needs to load some basic drivers, so most of the problems will appear on the driver, such as the digital signature cannot be verified after installing the driver.

Solution: 1. Restart the computer, then press F8, select Disable Driver Signature Enforcement, and then you can enter the system.

Safe mode is stuck on a file.

As in the analyzed case, the file is stuck when entering safe mode.

It's like this when you turn it on.,The security mode can't get in.,Ask the god for guidance.,Kneel and thank.。

I just changed the hard drive, and then turned it on and that's it.

Boot up is this, the security mode can't get in, ask the god for guidance, kneel down to thank you for your kindness, digital signature causes the security mode to not get in. This problem is relatively easy to solve, because the security mode also needs to load some basic drivers, so most of the problems will appear on the driver, such as the digital signature cannot be verified after installing the driver. Workaround:

1. Restart the computer, then press F8, select Disable Driver Signing Force, and then you can enter the system. Safe mode is stuck on a file. As in the analyzed case, the file is stuck when entering safe mode.

I just changed the hard drive, and then turned it on and that's it. Hello dear, the hard disk you replaced should say that the operating system has been installed, because the XP cannot replace the motherboard after installation, so it cannot be entered. If you use the same motherboard as the one installed in the hard drive, then there is no problem.

If you cannot enter the safe mode by force restarting three times, you can enter the safe mode by restarting as follows:

1. Tools Raw Materials:

Huawei MateBook 15, Windows 11, "Safe Mode" feature.

Second, the specific steps:

1. Click the "Win" icon in the lower left corner of the desktop, then click the "Power" icon, press and hold "Shift" on the keyboard, and then click "Restart".

2. After the computer restarts, go to the following page and click on the "Troubleshooting" option.

3. Then click on the "Advanced Options" option.

4. On the advanced options page, click "Start Settings" to select the remaining items, and then click the "Start Settings" option.

5. Next, click the "Restart" button in the lower right corner.

6. After the computer is restarted, the answer bucket now starts the setting page, 4 is to enable the safe mode, and you can enter the safe mode by tapping F4 or the number key 4.

It can be seen from the error message that the computer wants to run a file, and this file does not belong to the Windows operating system, and from the current situation, it is poisoned.

As for how to kill and kill, I don't have a solution here.

This is the hardware inside is incompatible,(It may be) After entering the xp welcome interface, it is black that the boot self-test has not passed,There is hardware can not be recognized, This is related to a lot of problems,System,The driver can be affected,It is recommended 1 Use the driver wizard to re-drive 2 No, reinstall the system, change the system and see 3 Go to the maintenance point to let him check whether it is which hardware is not working。

Hehe, there is a problem with your system boot partition, use software to fix the MRB partition table. If you haven't done it, find someone to come, and you may lose all the data on the hard drive by yourself. Be careful!!!

There is an error in the system, so let's reinstall the system.

You can only enter safe mode when you boot the computer, you can try the following operations.

1) Press F8 immediately after booting to the advanced option appears in the let go, select "the latest correct configuration" Enter to repair, not yet press F8 to enter the safe mode to restore the system or reinstall the system (if the reinstallation is also not open, it is recommended to overhaul it, if you can enter the safe mode, it means that you have installed something inappropriate, uninstall all the inappropriate things before the accident, or restore the system or reinstall, if your computer is win8, you can't enter the system is not in safe mode, Only reloaded). First soft and then hard, such a problem is caused by software conflicts, inappropriate drivers, and system problems, you can restore the system in safe mode, or not reinstall the operating system, don't install software, patches, drivers, etc., to see if there is still a problem with booting? If you don't install drivers, patches, and software step by step, and find something that isn't suitable, don't install it.

2) If this is always the case, first soft and then hard, reinstall the operating system, do not install software, patches, drivers, etc., and see if there is still a problem with booting? If you don't install the driver, make up for the software, and find out what is not suitable, don't install it (if you have any questions, please ask me).

Please note: If you restore the system or reinstall it, when installing drivers, patches, software and other things, be sure not to install the things that happened to you this time, otherwise it will be restored or reinstalled in vain.

3) Whether there is a problem with hardware, such as hard disk, memory, graphics card, motherboard, etc., if it is caused by hardware problems, it is recommended to overhaul it.