What is the correct way to stamp the riding stamp

There are two ways to stamp the riding seal, the first is that after the riding seal, each page of the contract should have a red seal (front and back cover); The second type is to press the lid on the middle seam of the left and right pages (left and right covers). Take the first one as an example, and the specific cover method is as follows:

The sewing chapter of the page paper needs to be neatly spread along the seam, and the chapter is evenly distributed on the two sheets of paper.

2. There are many pages, twist the paper along the seam by hand, estimate the size of the chapter, the first page and the last page should be more white than the middle, and then the middle white space will be evenly distributed.

3. Cover the chapter evenly on the paper, and the first and last pages should be covered with more parts than the middle, so that the stamped seal will have words on each page.

4. Whether the thicker information can be stamped effectively depends on the shape and size of the seal.

5. Riding sewing seals are often used on several pieces of paper documents, which is easy to cause individual pages to be missed, so it is necessary to check whether the paper is twisted before covering, as shown in the figure below.

When stamping, press to the side seams. The seal should cover each page, the seal should be complete, and when the document is filed, the area of the last piece of paper should be larger, so that the seal can not be covered outside the document.

When the ordinary official seal is sealed, it is required to "ride the year and press the month", but ride the seal.

It is required to "ride the seam", that is, the official seal should be evenly covered and pressed on the middle seam of the two pages of foldable paper, half of which is kept as a stub, and the other half is held as a certificate.

Stamped with the seal, the contract as a whole can be restored to the original seal, so it can prevent the other party from changing the content of the contract, prevent the other party from denying the content of the contract, and avoid unnecessary troubles, disputes and losses caused by changing the content of the contract or denying the content of the contract.

Precautions for stamping riding seam seals:

As the name suggests, the riding sewing chapter should be ridden sewing, and it should be ridden to hold all the seams, that is, each page of the contract should have a red seal after the riding sewing seal is stamped, and the first page and the last page should have words at the same time, not just a red circle (only the red circle is easy to fake), there should be no missing pages, whether it is a leak in the middle or a leak before and after.

The contract should be able to restore the riding seal to the original chapter, and only in this way can it be a more standardized riding chapter and play the role of the riding seal.

The most important significance of the seal is to prevent the addition or deletion of page numbers in the contract documents signed by both parties, which helps to protect the integrity of the entire document from malicious damage. Documents stamped with a sewing seal can be easily identified in the later stage, whether it is adding or subtracting pages. Prevent digging or adding pages to protect the document from being rewritten.

Dong Zhu smart seal, stamping and sewing tips.

If it can be re-stamped, it should be re-stamped above or below the original stamp, and this time the stamp is complete.

Stagger the contract evenly, the staggered seam is slightly smaller than the official seal, cover the official seal in the staggered place, ensure that each page has a seal, and be careful not to cover the official seal outside the page.

1. The riding seal is generally used for more important documents. Because of the importance of these documents, they are usually archived and are usually found in the file, the Letter of Referral for Transfer, or in the documents of the personnel department of other organizations.

2. Riding the sewing seal, that is, when stamping, it should be pressed to the side seam. When the ordinary official seal is sealed, it is required to "ride the year and press the month", but the riding seal requires "riding the seam", that is, the official seal should be evenly stamped on the middle seam of the two pages of foldable paper, half of which is kept as a stub, and the other half is held as a certificate.

3. Like the "steel seal", it has the function of preventing the addition or deletion of page numbers in the document, that is, more or less pages can be seen, preventing digging or adding pages to falsify, so as to maintain the integrity of the document.

To stamp the stamp, you need to stagger each page of the document and spread it on the blind side of the table, and then stamped it on the side of the staggered multi-page document with a seal, and the specific method of stamping the stamping is as follows:

1. First, lay the multi-page file flat on your desktop.

2. Stagger each page of the multi-page document on the side to ensure that a small part of each page is exposed, and the size of the area should be slightly larger than the size of the seal.

3. Place the seal flat on the stamp pad, dip a small amount of ink, and press the seal on the side of the multi-page document that is staggered everywhere and wait for more than a dozen liters.

4. In the end, the riding seal was changed.

Notes:

Note that the stamping must be carried out after staggering each page, after the stamping is a complete seal noisy, remember to check, do not have missing pages, if there is a omission, only the document can be invalidated, re-stamped.

Riding the sewing chapter refers to the chapter face and the edge of the document parallel, leaving a certain distance between the chapter surface and the edge of the document, placing the chapter face on the document, and then pressing the chapter surface with your hand to make the chapter face and the document fit tightly, and finally the chapter surface is withdrawn from the document to complete the process of sealing. The specific steps are as follows:1

Place the document on a flat desktop, and place the place that needs to be stamped on the edge of the desktop for easy operation. 2.With the chapter face up, use your fingers to evenly coat the ink on the chapter face.

3.Parallel to the edge of the document, leave a certain distance between the chapter and the edge of the document, generally 1-2 mm. 4.

Press the chapter face with your hand so that the chapter face fits snugly with the document, and at the same time, the force is even, and it is not skewed or offset. 5.Remove the seal from the document and complete the stamping process.

Notes:1Check whether the seal surface is clean before stamping to avoid uneven ink or stains.

2.When stamping, pay attention to the distance between the seal surface and the edge of the document to avoid bias or crooked covering. 3.

When stamping, the force should be evenly used to avoid the situation that the chapter surface is not clear or the envy is missing.