100 meters to the right in front of the courtyard gate, there is a high voltage line crossing the fr

No, the high-voltage line is too close to the living environment is not good for health, and it also affects the appearance and safety.

The 100-meter high-voltage line on the right in front of the gate, in front of the boat, in this case, there is no impact on the family promotion, and there is nothing unlucky, as long as you pay attention to safety when traveling.

It's okay, 100 meters is far enough away that it won't do much harm to the family.

This has no effect on your home at all, so it doesn't matter, there's nothing wrong with it.

If there is a high-voltage line 100 meters in front of the gate of the power outage, then if the height of the high-voltage line is relatively high, then there is no problem, if it is relatively low, you must pay attention to safety issues.

There is no problem with this kind of bridge, as long as it is within the safety range, there is no problem at all, and it will not have much impact, so you must pay attention to this aspect.

No problem.

This distance is safe.

Kerosene safety hazards.

This has no effect, the distance of 100 meters is still relatively far.

If the 100 meters on the right side of the front is already far from your house, don't worry, 100 meters is a long distance.

I don't think it's a big problem as long as it's not directly above your house.

And it's 100 meters away, which is not close.

This is definitely not good, you can change the direction of the door.

Now that there is a telephone pole in front of the house, everyone is doing well, and you will be doing well, right?

There is a high-voltage line crossing the front 100 meters in front of the courtyard gate, is it good for the family? Okay, I don't think it's safe where there are high lines.

100 meters to the right in front of the courtyard gate, there is a high-voltage line running through the front. It doesn't have any impact on the family, and the line is just set up by people. There are not so many requirements.

In front of the courtyard gate, there is a high-voltage line 100 meters on the right, and I think it is dangerous to cross the front to the family.

There is a scraped line 100 meters to the right in front of the courtyard gate, and there is no good or bad relationship with the family in front of the crossing.

If you mind this, you can find a feng shui master to help you plan and see how to improve.

If you have a high second-tier line, it's definitely not good, especially the bad one.

1. It should be arranged by professionals.

To lay the network cables in parallel, you must first set up a bus box for network cables, and then summarize the network cables laid in each room into this bus box. In this way, you can use a shared device such as a switch in the future. In addition, a network cable should be placed outside the gate, which should also lead to the bus box.

This line will be the broadband line connected to the home inside and outside of the line.

2. Pay attention to the selection of modules and network cables.

The purchase of modules and network cables is now mostly a disposable bayonet module. After being stuck once, it may not be stuck for the second time, and the network cable will not work. But it is quite difficult to get stuck in the line.

And after using it once, you can't use it a second time. It is recommended to purchase a module with screws, which can be used many times and is easy to install and maintain. Purchase of network cable:

Just choose a single copper core network cable. Wires with thin copper cores cannot be used, which will affect the speed of the network, and some will lead to the inability to access the Internet.

3. The position cannot be changed without permission.

Do not move the position of the incoming box without permission, and do not connect the incoming cable without permission. Because broadband is not like ** and wires can be used firmly. The connection of the broadband line is connected by something special. Remember this, avoid finding the middle joint in the future.

Prepare space and power at the entrance to the network for installing a wireless router.

The wireless router uses a power modem suit, which is the kind of main router with several secondary routes, the main router is connected to the network cable, and the secondary router does not need to be wired (currently it can be equipped with up to seven) plugged into any power socket (all sockets are in the same meter), these secondary router and the main router have wireless and wired interfaces, no matter what equipment can be connected.

This method does not require a top-wire connection in the room, and the investment is low and very affordable.

Of course, it is a PVC pipe to pass through the wall, pay attention to the installation interface should be more than 30cm from the ground, and the socket side by side.

However, the wireless routing at home is not very good, the signal is not bad, and it is convenient.

Two kinds: 1. The wall is slotted, and the network cable is worn through the PVC pipe, which is convenient for future maintenance.

2. It can also be placed directly in the floor, but it is troublesome to change the network cable in the future.

1. Select the installation location of the integrated access box. Embedded in advance the closed cables, user fiber cables (preferably 2), and network cables that need to be accessed from the outside. In order to choose the network access of different communication operators.

2. Put at least one network cable from the integrated access box to each room in order to access wifi and computers, and determine the installation location. Reserve at least 50 cm at both ends of each network cable, and reserve enough length as needed.

3. The integrated access box to the TV wall is pre-embedded with network cables (at least 2), closed lines, and ** lines (can be replaced by network cables).

4. Purchase a router and switch. The router can optionally support Gigabit.

1. Since the reserved network transceiver device is the photoelectric cat, it is basically set up in the indoor multi-box now, so we need to open it from the indoor multi-box when we arrange the indoor network;

2. Since we want to arrange the network socket in each room, then we need to arrange the network cable in each room, and the specific layout method of the network cable is to arrange the line pipe from the indoor multi-box and arrange the line pipe to the network socket layout point in each room.

3. This network layout method needs to configure a switch or router in a multi-** box, if we need to arrange a wireless network, we can also arrange a wireless router here, so that each room can have a network socket and realize the full coverage of the network through wires.

1. In three years, China will enter the 5G era. 2. In 2016, the focus of China Mobile's work will be to promote the development of 4G+, and at the same time, it plans to build 300,000 new 4G base stations within the year, and will also promote the transfer of 4G to 5G, aiming to achieve 5G commercialization in 2020. 3. Therefore, the 5G era has not really arrived, and it will not be realized until 2020.

**Before the decoration of the new house, how should the home network wiring be carried out, and the white decoration house must be seen.

Generally, there is no need to use Category 66 or shielded wires for household use, and these are often used in high-end applications such as data centers, computer rooms, and banks that require relatively high data transmission in the local area network. At most, the most you can use at home is to go to the Internet, and I don't think we can catch up with the gigabit Internet speed in our lifetime :)

There are too many miscellaneous brands of super five types of wire sold now, you must not buy a network cable of about one meter for one yuan when you buy, the core of the wire is neither copper nor particularly thin, if the line cloth is relatively long or used for a long time, there will always be a problem waiting for you!

It is recommended that network cables should be arranged in each room, and they should be concentrated in the location of the weak current box!

1: Most families use general routers, and the network effect is not satisfactory in the end. The reason is that the family room often reduces the wall-piercing effect of the router.

2: Unsightly, the router cannot be put into the weak current box, resulting in the network cable is disordered and unsightly!

Suggestion: Arrange network cables in each room, use in-wall panel APs, and use gateways to install routers into weak current boxes. Realize the unified management of APs, the network cables are no longer messy, and each room realizes wireless network coverage without dead ends, and can maintain beauty!

Zhengzhou Free People Technology Co., Ltd. - a one-stop wireless network coverage solution provider.

It's really not clear.

First of all, it is definitely possible to use wireless networking for your computer. Just do what you say.

But what's the deal with television? How do I connect to the Internet? Are you going to use it as a monitor?

It seems that the current TV can't be directly connected to the Internet to watch TV! (I haven't seen it) speaker! Are you afraid that wireless will affect the sound effect? That shouldn't be.

What do you say is messy, what does Wi-Fi have to do with TV and stereos??? The unlimited LAN you set up with a wireless router has a wireless connection in the control panel of the computer, and you can set it up.

In the position of the main line to the house, a weak current box is placed, and routers, cats and other equipment are placed in it. It should be noted in this step that if this location is relatively biased, you need to choose a new location that is located in the middle of the house as much as possible, which can not only save wires, but also ensure that the wireless router signal is covered by the whole family in the future. Considering the purpose of each room and the placement of furniture in the future, all rooms that may access the Internet in the future are covered with network cables, and connected to the weak current box, and the room number is marked respectively.

The TV wall in the living room should also be laid with network cables, which can be used for network set-top boxes.