How to replace the gas stove battery, how to change the gas stove battery

Gas stove battery replacement is generally replaced at the bottom of the gas stove, a total of three steps can be completed.

Hold up the gas stove.

The gas stove can't be lit, you can check the lighter needle, whether there is dirt covering, if it is clean, usually the battery is dead, first hold up the gas stove.

Open the battery compartment.

At the bottom of the gas stove, find a plastic box and open the lid to remove the battery.

Attach the battery. If you don't have a spare battery, you can knock the surface of the battery, knock out the dent and replace it with the battery compartment, so that you can also use it once or twice in an emergency, and then replace it with a new battery.

First, find the battery compartment located at the bottom of the gas stove, open the lid and take out the battery. Then look at the type of battery – usually No. 1 dry battery. Depending on the model, buy two new batteries that are suitable and install them.

When installing, pay attention to the positive and negative poles of the battery, and do not install them in reverse. After installation, close the back cover, and then carry out the ignition test. After the test is normal, the gas stove can be back in use.

Gas stove battery replacement: There is a special battery slot at the bottom of the gas stove, which is generally sold in stores, and the large No. 5 battery. Remove the old one and replace it with a new one.

The gas stove battery replacement method is as follows:1. If the gas stove has been installed, we can probe to the bottom of the gas stove.

2. We saw a small black box, which is the box with the battery.

3. We press the buckle of the battery box on the side of the box, and it is opened.

4. After opening the box, we can deduct the battery by hand.

5. After deducting the battery, we can see that the box can only hold one large battery.

6. If we want to replace the battery, pay attention to the direction of the battery.

Find the battery compartment at the bottom of the gas stove, remove the old battery, install the new battery, and close the battery compartment lid. Here's how:

Tool: Gas stove.

Replacement Material: Battery.

1. First turn the gas stove upside down and carefully look for the battery compartment at the bottom of the gas stove.

2. After the battery compartment is found, open the battery cover along the open position and remove the battery inside.

3. Then replace the newly bought battery, and when installing, you need to see the positive and negative poles of the battery.

4. After the installation is completed, close the lid and put the direction of the gas stove back to the original position.

To replace the gas stove battery, you first need to find the battery box at the bottom of the gas stove (the battery box is generally divided into a clamshell battery box and a spring-pressure battery box), then open the battery box, take out the old battery, and finally replace the newly bought land battery and close the battery box. When installing, pay attention to the positive and negative poles of the battery, if the positive electrode has an insulating cap, it needs to be removed before it can be used normally.

How to replace the <> gas stove battery:

1. Clamshell battery box.

Buckle the battery box cover buckle with your hand, and open the lid of the electric god Zen letter pool downward;

Put the battery into the battery compartment according to the position of the positive and negative levels of the battery compartment cover (note that the positive and negative levels are not reversed, and the negative electrodes are aligned with the direction of the spring of the battery box), and then the battery is clamped tightly and the battery compartment can be closed.

2. Elastic battery box.

Turn the battery compartment buckle counterclockwise to the open position, press the battery compartment upwards to hear a "click" sound, and the battery compartment pops out;

Put the battery into the battery box according to the position of the positive and negative levels of the battery box (pay attention to the positive and negative levels and do not connect them in reverse);

Then put the battery box back on the gas stove, press the cruise ship up to press the battery box to hear a "click" sound, and finally turn the buckle clockwise to the closed position.

In the process of modern home decoration design, the decoration design of the kitchen is also very important, our three meals a day are to be cooked in the kitchen, and the gas stove will be used, some families encounterGas stove battery1. How to replace the gas stove battery.

Nowadays, many people don't cook and often order takeout, but some people are tired of the fast food nearby. In fact, it is very fun to cook at home, and when cooking, I will inevitably use a gas stove, and when I use it, I find that the gas stove battery is dead. At this point, I need to replace the gas stove battery.

If you know how to replace or hail a gas stove battery, as well as instructions for installing a gas stove battery, read on.

First, how to replace the gas stove battery.

1.Get ready. When you are sure that the battery is dead, you can first find its installation instructions, which will be detailed. If not, you can find the answer to the gas stove model.

2.Operate. 1) The battery box is generally located at the bottom of the gas stove. The current battery compartment is designed to be self-locking, first finding the location of the device's battery and then observing how it opens.

2) Remove the battery compartment.

In the "open state", the force block pushes inward towards the middle, then releases the hand, and the unit will eject the battery compartment and grasp the power.

3) Install the battery box.

Start by removing the previous battery and insert the replacement battery into the battery holder properly. Pay attention to the positive and negative terminals of the battery. Push it all the way in after alignment. Then you will hear or feel a "click" and say that the pool box is installed.

Second, what are the common problems of gas stove batteries.

There are sparks. Press and turn the gas stove switch counterclockwise, and it is found that there are only a few sparks in the gold, but the fire cannot be hit.

Maintenance Methods. Start by removing the battery, removing and reinserting it once. Try again and everything will be fine.

2.There is no electric spark.

When using it, I found that the gas stove could not ignite and there was no spark. It is not clear whether the problem is serious.

Maintenance Methods. Remove the battery first, then reinstall it. As with the above method, you can usually light the fire again.

3.There is an electric spark but no ignition.

When the gas stove is running, it is found that it has sparks, but it cannot be beaten. Retries multiple times are the same and don't have much of an impact.

Repair method. This may not be the cause of the battery. I have to look at the air**. If not, try it. If the situation is the same, then you need to send it for repair.

3. Daily maintenance methods of gas stoves.

1.There will be a lot of oil stains after using a gas stove for a long time. If it is not cleaned, it can easily cause clogging, and it should be cleaned regularly.

2.Regularly check the tightness of the furnace and gas supply system by a professional.

3.The stove is clean and can be cleaned with white vinegar and water, then wiped with a sponge or soft rag.

4.Gas stove vents should also be cleaned frequently, with a toothpick, once a week, carbide and coke piled on the stove head, which can be removed with a small brush, or used to puncture fire holes.

The above is all the content of the gas stove battery introduced to you.

1. First remove the bracket on the top of the gas stove and then turn the bottom of the gas stove over.

2. Find the position where the battery is installed at the bottom, then open the lap of the battery, then take out the old battery inside, and wipe the battery installation with a clean rag.

3. Pay attention to the positive and negative poles of the battery installation position, and clamp the new combustion battery in the battery compartment according to the correct orientation, and then fix the battery shell tightly after clamping.

1. The battery box is generally at the bottom of the gas stove, so first find the battery box at the bottom of the gas stove, and then pour it back to look carefully. There is wood on the reverse side of the gas stove, and it seems that a battery is installed in any part. The structure of each gas stove is very different, so the part that houses the battery is also different.

2. After finding the location where the battery is installed, open the battery cover along the open position, people can see that there is a dry battery inside, pay attention to buying the same size battery when purchasing.

3. Take out the battery of the gas stove like taking the controller battery, and then replace the newly bought battery. Pay attention to the positive and negative of the battery when installing. If a gas stove is installed, it cannot be used.

4. After the installation is completed, close the lid, put the position of the gas stove in its original position, and turn on the liquefied gas. Try to see if the gas stove can be ignited properly. A spark can be seen when you swing the power switch, indicating that everything can be ignited normally. If it still can't, there will be no liquefied gas.

When we use a gas stove at home, we often encounter a dead battery, so how to replace the battery? Let me share it with you.

01 First of all, we will lift the lid of the gas stove, as shown in the figure below02 Next, remove the cover of the battery, as shown in the figure below03 Then take out the dead battery and replace it with a new battery, as shown in the figure below04 Finally, cover the lid of the gas stove and light the fire to see if it is okay.