How to speed up CAD people s very fast mine is very slow

1. Find the program from the support---cadmanagercontrol--- in the folders of each layer from the installation disk.

1.Run.

2.Turn off the Communications Center and the Online Help Center.

Click Apply, and then click OK

2. Modify the value of the system variable of vtenable.

There's a vtenable command in CAD commands that enables smooth transitions to switch display areas, the default value is 3, and we can set it to 0 to speed up startup.

Steps: Enter venable on the CAD command line, then enter 0 as prompted, and press Enter.

3. Cancel the option of "Check the issuer's certificate revocation".

1. Select Start - Settings - Control Panel.

2. Select the Internet option.

3. In the Internet Properties dialog box, click Advanced Labels.

4. Clear the "Check for Publisher's Certificate Revocation" option.

5. Click Apply, and then click OK.

6. Restart and run the application.

4. Load the CAD startup accelerator.

When we install CAD, we will automatically load an accelerator, if the CAD is slow to open, please check whether the accelerator is successfully started.

Check method: Open the start menu program start to see if there is a thing called CAD startup accelerator in it, if there is, it means that the program is loaded If not, please put this thing under the boot menu, let it start randomly.

It has something to do with the performance of your machine.

Do you use shortcuts? It's going to be fast.

Here's how to speed up CAD 2010:

1. Set the automatic saving time reasonably. Open the AutoCAD software on your computer. Then click the Tools button on the menu bar, select Options, or enter the command "op" and press the spacebar to confirm.

2. In the "Options" dialog box that opens, click the [Open and Save] tab, and then change the "Autosave Interval Minutes" to a smaller size, such as 10, and click the [OK] button.

3. Reasonable setting of arc accuracy. In the Options dialog box, click the Display tab. It's best to keep the default content of the "display accuracy" section, and you can change it to a smaller size if necessary.

4. Enable adaptive degradation and hardware acceleration. Or in the Options dialog box, click the System tab, and then click the Performance Settings button.

5. In the "Adaptive Degradation and Performance Tuning" dialog box that opens, check "Adaptive Degradation" and change the value of "Downgrade when FPS is lower than the following value", such as 60. Then click the Manual Adjustment button.

6. In the "Manual Performance Tuning" dialog box that opens, check "Enable Hardware Acceleration", select [Low (Faster)" in the "Transparency Quality" drop-down box, and check "Dynamic Pai Volt Mosaic", and finally click the [OK] button to close all dialog boxes.

7. Clean up software junk. Sometimes when we copy a graphic from another file, we will also copy the layers, blocks, etc. from the other file, which slows down the software. At this point, you can get rid of this useless information.

8. Enter the command "pu" and press the spacebar to confirm to open the "Clean" dialog box.

9. Select "View items that can be cleaned", and the unused items in the drawing will be listed, and click the [Clean All] button. If you are not at ease, you can check one by one to see if you have cleaned it up, so that the problem is solved.

The reasons are as follows: 1. The electric spinal graphics card is not good enough, and the requirements for drawing are not high enough.

2. There is a lot of content in the CAD drawing, and the computer needs time to cache.

Speed up method: 1. Press the shortcut key pu to clean up Wu Answer.

2. Check the third item in "Layout Regeneration Options" in "Tools" - "Options" - "Users".

3. In CAD drawing, other programs are not run at the same time.

4. Upgrade the machine configuration, add memory sticks.

Method 1, 1, click "Start" - Control Panel".

2. Click on "Internet Options".

3. Click "Advanced". And remove the check whether the issuer's certificate is revoked, click Apply, and click OK.

Method 2 <>

3. Right-click "CAD2015."", or another version of the icon. Click on "Properties".

4. Click "Open File Location".

5. Click on the "support" folder to enter.

6. In this folder, right-click "Paste". That's it.

1. Open the CAD software first, enter OP, space, and open the system-performance settings.

2. Select Adaptive Downgrade. Downgrade when fps is lower than 60 (fps default is 5).

FPS value: 0 10, very unsmooth, it feels very stuck, and it is not easy to position;

10 20, not smooth, the operation needs to be slowed down;

20 30, mostly fluent, with occasional pauses;

30 or more, very smooth.

3. On the right side of the performance panel, open the hardware acceleration "manual adjustment", remove the manual adjustment hook, 4. After completing the internal settings of the software, close the CAD and proceed to the next setting.

5. Find the CAD source file installation package and double-click to install. Click "Install Tools and Utilities" - check only the second item "Autodesk CAD Manager Tools" to install.

6. After the installation is completed, open the program "CAD Administrator Control Program" in the computer "Start"--Programs--Autodesk-

7. After opening this control program, select Disable DesignCenter Online.

8. Reopen CAD, it only takes a few seconds to open the software, and use CAD to draw planes, and the modeling speed is accelerated.

You can try to search and **CAD acceleration plug-in(,**After completion, copy it to the [support] folder in the CAD installation directory to help solve the problem of slow CAD startup. For more useful CAD skills, you can go to the official website of Haochen software to understand

1. Open a web page casually - select Tools - Internet Options - Advanced - and check whether the publisher's certificate is revoked.

Click Remove - OK.

Turn it back on. 2. Try it with the new version.

3,30 seconds is normal.

If exceeded. The description is a problem with the software.

Or maybe it's a lack of computer memory**.

If the computer hardware can, it is a system problem or a virus, it is useless to set it here and there, practice is the last word, don't use copy and paste to fool people, I use CAD2007

The higher version of CAD has higher and higher requirements for computer configuration, and I will take the latest version of AutoCAD2016 as an example to explain how to speed up your CAD and make it faster to start running.

1. Start hardware acceleration, which is enabled by default, and there is a switch in the lower right corner of the high-version CAD to directly enable hardware acceleration;

2. Open the CAD administrator control utility to speed up CAD2016;

This is not installed by default, if it is not installed, you need to install it in advance.

CAD acceleration from four aspects: information center, online content, online and feedback, set as shown in the following figure:

3. Modify the value of the system variable of vtenable;

There is a venable command in the cad command, which enables the flat smile and slide transition to toggle the display area, the default value is 3, and we can set the trapped chain to 0 to speed up the startup. Method: Enter venable in the cad command line, and then enter 0 as prompted.

5. Remove the logo at startup, right-click the desktop CAD shortcut, attributes, and add "nologo" after the target;

6. CAD start accelerator;

When we install CAD, she automatically loads an accelerator, and sometimes the optimization software optimizes it. If the CAD is slow to open, please check whether the accelerator is successfully started. If it is not started, it will be added to the boot startup item.

7. Clean up the garbage in the drawings.

Large drawings that have copied some things from other drawings often have redundant layers and blocks, which occupy a lot of system resources, in this case, using PU (purge's simplified command) to clean up excess garbage can effectively speed up.