What is the difference between the condensation condensation function of Wanhe s water heater and th

Wanhe's condensation condensation and condensation function are exactly the same. The difference is that the computer chip used in condensation condensation is imported from Japan, and the condensation is domestic.

In addition, the panel of Ningzhi condensation is brushed stainless steel, which is more beautiful.

It depends on whether you pick the chip or the appearance, pick the appearance to buy condensation, and pick the chip to buy condensation.

If the water pressure in the house is stable, it is recommended to buy Ningqiao Condensation, the price is only half of Ningzhi Condensation, except that it is mechanical (no computer chip), the rest is exactly the same.

Condensation is mechanical, meaning non-constant temperature. It also means that it is not prone to breakdowns.

If the water pressure in the house is stable, there is no need to buy a thermostatic water heater.

If the water pressure in the house is unstable, you must buy a thermostatic water heater, but be careful not to buy a false thermostat, but to buy a computer-controlled proportional valve thermostat. Since the maintenance cost is very high after the computer chip is broken, it is recommended to buy condensation (Japanese chip).

Now the use of gas is also a bit too unsafe, I still like to use electric water heaters, cheap, quality and after-sales are good, you consider changing the use of electricity, love of Australia Otron Smith are not bad, are still professionally produced, you can consider others, gas is getting more and more expensive.

The structure is much the same, but the appearance is slightly different.

The relative condensation is better (JSQ18-10E).

Are condensing machine series, but the name of each machine is different, the appearance, the material, the number of liters is not the same, the condensing machine is a new type of high-efficiency, energy-saving, environmentally friendly products, he has two heat exchange chambers, the use of the high-temperature flue gas generated in the body to preheat the cold water, cold water and then absorb the sensible heat of the flame, the thermal efficiency of the two parts is added to save more than 30% energy than ordinary machines, but the most professional condensing machine should be Wanjiale's should be the condenser is developed by Wanjiale with a phase of patented technology Moreover, Wanjiale's condenser has neutralization treatment technology (because the condenser has acidic condensate, which is almost the same as tap water after being treated by neutralization treatment technology), does not corrode the machine, and has a long service life, so Wanjiale is the first choice.

Condensation refers to the fact that the weather is too cold, and there is a fear that the water will condense and ice and block the tube. That all means that it will be like this when it is used in the north, so it has this anti-function.

Tell you. You can buy the cheapest. , buy thermostat. The cheapest. Expensive is just as cheap as cheap. It's just that the appearance is not expensive and pretty. That's just a lot of money, and it's useless to be cold or not.

The condenser will produce condensate after heating, and the condensate is acidic, and there is a neutralizer in it, which is an alkaline substance. After the two are neutralized, the water flows out of the drain pipe, and the neutralizer inside is changed according to your consultation when you buy. Generally, you have to change it once every three years, and you have to calculate more than one time If you keep water, it's easy to say, what if you keep sour water, so pay attention

This is the drain pipe of the condensing water heater that is used to drain the condensate that has been neutralized.

Hehe, the condensing water heater must have an extra pipe to discharge the condensate!

Ningquan is cheap, Ningxiang is expensive, I just bought a fixed thing Ningzhi, the local goods are out of stock for a Ningquan, it is recommended that you buy a Ningzhi, Ningquan is a new product to replace Ningzhi, Ningquan even a leakage protection plug is saved. BS Wanhe, in order to reduce costs, you can look at the previous machines that are not recommended to buy Ningquan, buy Ningxiang if the price difference is not large, or buy a Ningzhi. I hope it will be useful to you for the new condensation spring products released in 2011.

All are condensers. It's best to let **open the machine and look inside.。。 The quality of condensers below 1800 is generally not up to standard. Cut corners.. Let's compare it to other brands.

Normally, the amount of water produced by the condensation process is not just the difference between winter and summer.

There are many other factors.

1.If the cold water temperature in your home is 15-18 degrees, then you will have more condensation, 2Your machine is newly installed, the machine, the environment is colder, and the natural condensation will be more, 3If you set the hot water temperature above 60 degrees, there will be more condensation.

Comparatively speaking, the more condensate, the more energy saving.

Normal, this is a normal physical phenomenon.

Wanhe's is not bad, and his condensing machine can consider the old Wen of the Ningzhi series.

As a domestic brand, Wanhe's is not bad, and his condensing machine can consider the old Wen of the Ningzhi series.

An old domestic brand. However, I still prefer Haier's, the product quality is first, the service is good, and the product is energy-saving.

No, I personally think it's better.

If you choose their belongings, you will have to accept high installation costs and frequent repairs after the expiration date (high maintenance costs).

I also ordered Wanhe's condensing water heater and felt that the brand was trustworthy.

At the moment I am using it at home, and it is okay,

JSQ21-12E-0: Wanhe Condensing Cold Stuffy Condensing Gas Water Heater JSQ21-12E-1: Ningzhi Condensing Constant Temperature Strong Exhaust Water Heater Loose Smock The former is several hundred dollars more expensive than the rear flusher.

Hello, you can directly call Wanhe after-sales ** and let them repair it for you, or log in to Shenzhen Home Grid to consult their customer service staff, it is best not to repair it yourself, as long as it can be repaired free of charge during the warranty period.

The air pressure adjustment is to find Wanhe's master to bring a barometer to adjust, and the parameters are only known to the master.

As for your needs, you don't need to adjust the air pressure, or directly consult Wanhe after-sales 400-830-8383.

Adjusting the secondary pressure is a matter of the manufacturer's after-sales service, do you plan to adjust it yourself? They all have their own fixed data, and they also need professional tools.

Or is it better to compare insurance after the sale?