What s the matter if the computer doesn t open like this, what s the matter if the computer doesn t

Hello, this is mainly: "There is an error in the memory" or "abnormal shutdown" is caused!

1。Try to boot the computer, after the computer brand is out, press F8, press Enter, Enter, enter the safe mode, and start advanced.

options, the last correct configuration, Enter, Enter, press to try! [Critical step].

2。No more, enter the safe mode, press enter, and after going to the desktop, antivirus software, full antivirus!

Quarantine" stuff, completely removed!

3。Reuse: 360 Security Guard, "Trojan Horse Killing": "360 System First Aid Kit", System Repair, Select All, Fix Now! [Critical step].

Network Repair, Start Fixing!

Again: Start First Aid! After restarting, click on the "File Recovery Area" and select all to completely delete the files!

360 Security Guard, Scan Plugins, Clean Now! 360 Security Guard, System Repair, One-click Repair!

4。If you can't do it again, unplug the graphics card and memory module, erase it, use a brush again, clean the slot dust and fan, replace the memory slot, etc.! [Desktop].

etc., uninstall the redundant, and only leave one, because similar software is not compatible with each other! [Critical step].

7。If you still can't turn it on, you need to "one-click restore" or "reinstall the system"!

8。If there is a problem with the hardware, send it for repair!

Liwang History | 2010-12-11

Don't power off directly before you turn it off.

If the computer does not turn on, it may be: the motherboard jumper is inserted incorrectly, or the power switch is not turned on, or the power supply is faulty.

If there is a problem of motherboard jumper insertion error, you should first check whether the interface at the motherboard jumper is inserted correctly, if you are really not sure, unplug all of them, and use metal objects to short the two pins of "power", if you can boot normally, then the first thing to rule out is the problem of core hardware.

If the installation of the motherboard jumper is correct, and the chassis switch button is not faulty, you should check whether the switch at the power input is on, if the power strip and PC power supply remain on, and the jumper and switch are completely correct, then it can be preliminarily determined that the power supply is damaged or faulty.

Precautions for using a computer

1. When using the computer, we should pay attention to the hygiene of the computer, we must ensure the cleanliness of our computer, especially the keyboard that is often used will breed a lot of bacteria, if not cleaned up in time, it will have a great impact on the body.

2. When working or living, those who use computers should pay attention to the ventilation in the living room, whether it is in the office or in their own homes, it is better to use the computer as much as possible in a ventilated environment, and drink more water, which can promote physical health.

3. After using the computer for a period of time, you should stand up for a walk, or do aerobic exercise, and the continuous use of the computer should not exceed two hours, if it is two hours, you should rest for more than ten minutes.

Summary. Hello dear, I'm glad to answer for you: the computer won't open as follows:

1. Boot press F8 to immobilize to the advanced option that appears in the let go, select the latest correct configuration enter repair. 2. Boot up and press F8 to enter the safe mode, and use the system's built-in system to restore to repair when there is no failure. 3. If the fault is still there, use the system disk to repair it, open the command prompt and enter sfc scannow, insert the original system disk to repair the system, and the system will compare and repair.

4. If the fault is still there, set the optical drive in the BIOS as the first boot device, insert it into the system installation disk, and press the R button to select the repair installation. 5. If the fault cannot be solved, it is recommended to reinstall the operating system. <>

Hello dear, I'm glad to answer for you: The computer can't be opened and disassembled is as follows: 1. Boot press f8 to the high brigade Xitu-level option appears in the hands, select the latest correct configuration enter repair.

2. Boot up and press F8 to enter the safe mode, and use the system's built-in system to restore to repair when there is no failure. 3. If the fault is still there, use the system disk to repair it, open the command prompt and enter sfc scannow, insert the original system disk to repair the system, and the system will compare and repair. 4. The fault is still there, set the optical drive in the BIOS as the first boot device, insert it into the system, and press the R button to select the repair and installation.

5. If the fault cannot be solved, it is recommended to reinstall the operating system. <>

Hello dear, the extensions for you are as follows: First, check whether the computer has started to boot up the operating system when the computer is turned on. If the operating system freezes, blue screen, or automatically restarts when the operating system is booted, it means that the hard disk's search partition table and master boot record are normal, and the hard disk partition table is damaged, the hard disk master boot record is damaged, and the hard disk partition end sign is missing.

I hope my raid can help you. <>