How can you make the computer not turn on, the computer can t turn on like this, is there any way to

Formatted the hard drive, and it's gone!! Or take the monitor away, take the CMOS battery out, and it won't turn on anyway.

Big brother, the soft one shouldn't work!! As long as the hardware is not damaged, there is no way, even if you have any method, it is difficult to set up, others want to open it, as long as you destroy your original system, there is nothing!! Don't think about the soft way, go for the hard one!!

For example, hiding the CPU, which is small and valuable!! If you don't have a CPU fairy, you can't get into the computer

If you don't make the system, it will never open...

It's also OK to set the motherboard password in the BIOS.

It's good to spend money on hackers searching the Internet for viruses that damage hardware devices such as hard drives, and if you want to open them, you can only change the hardware.

LZ is so funny, I've heard of asking the computer to turn on, but I've never heard of the computer deliberately not being able to open. You've really taught me a lot. I remembered a phrase, it's not that I don't understand, it's that the world is changing too fast!

If you really want to kill softly, then go and plant some viruses There are a lot of them on the Internet! It will please you.

Open the system folder, delete the system files, or modify the registry files.

When reinstalling the system, it will be forcibly terminated after reinstalling halfway, and that's it.

It's too soft to do it, unless you burn the hardware. Otherwise, people will change the system again. If it's hardware, just steal the other party's computer.

Dismantle the power supply of the computer and bury it.

This white cursor, the system can not start, if you want to copy the data, make a USB flash drive boot disk.

If you want to boot it, you can only reinstall it.

I guess there's something wrong with your computer system.

It may be time to reinstall the system.

Just say "open" to the host, you must use standard Mandarin, other languages can't be recognized, now read "open" with me...That's right, that's it.

1. The computer has too much dust, disconnect the power to turn on the host, and clean up the dust inside the host computer. Too much dust will cause a short circuit in the computer line and a crash caused by insufficient heat dissipation.

2. Remove the memory module again, wipe the gold edge with an eraser or a clean paper towel and then install it back.

3. Buckle the battery on the motherboard, initialize the motherboard BIOS settings, install it back and then turn it back on.

4. Use a USB flash drive to reinstall the system, overwrite all the system files that may be damaged, and attach the tutorial: USB flash drive to reinstall the system steps.

Right-click on "My Computer", select "Properties", and select "Advanced."'Click "Settings" in "Startup and Fault Recovery", click "" under "Default Operating System", open Notepad, set the second item in it to timeout=0, and then save the rollout. Follow-up question: But the boot menu was initially defaulted on the boot windows7, and I deleted this win7 a long time ago.

How do you turn on the computer when you set the waiting time to 0?

Also, sorry I forgot to tell you, it should be like this under [operating systems]:

Delete the others. Just in case, it's recommended that you back up the file beforehand.

Sweat. Send it to customer service.

See if it's a bad contact.

Take a look at whether the power supply is not plugged in properly, unplug the gold finger of the memory module, and wipe these hardware detections.

First of all, check whether the num light of the keypad can be turned on normally, if it is normal, it means that the host has worked, continue to check the connection cable and replace the monitor test; If the num light of the keypad does not light up, it means that the host is working abnormally, and you can discharge the motherboard BIOS, method: buckle the battery for a few minutes before installing it to the motherboard. Or remove the memory module and use an eraser to clean the gold finger of the memory module.

Check that the power light of the display is on.

If it doesn't light up——— check whether the power cord is properly connected, and if so, replace it with another monitor and try to connect it.

Bright ——— check if the cable is connected correctly (reconnected), or if it is loose or broken (replace the cable).

There are many kinds of situations, and there is no information that pops up.