My phone is connected to WiFi, why does it show WLAN?

WLAN is the abbreviation of wireless LAN, as a data transmission system, the general standard is the IEEE series, and the WLAN of mobile phones, in fact, contains two ways to access the Internet, one is our commonly used WiFi, and the other is WAPI.

Because WLAN is WiFi, the general name of wireless data connection is WLAN, so this is normal.

Because WLAN is a general term for wireless local area network, WiFi is a new way to access the Internet derived from the WLAN standard.

In this case, the network acceleration function is turned on, which is designed to speed up the Internet with the help of mobile data networks in the case of slow wireless network speeds, and the two networks run at the same time.

Taking Huawei as an example, if you enable WLAN+, both network flags will appear at the same time, and you can disable them as follows:

1. Click "Settings" on the desktop of your phone.

2. On the settings page, click "Wireless & Network".

3. Click "WLAN" to enter the network settings page.

4. Click on the three vertical dots in the upper right corner.

5. Select Settings on the pop-up page.

6. Click the switch on the right to turn off WLAN+, so that the signs of wireless network and data traffic will not appear at the same time.

1. If the wifi is only opened, it does not mean that you are connected to the wifi If the connection is successful, there should be a wireless signal name next to the word wifi, such as chinanet or cmcc.

2. Solution: First open the phone settings, as shown below.

Please click Enter a description.

Then open the generic, as shown below.

Please click Enter a description.

Then open Restore as shown below.

Please click Enter a description.

Tap Reset Network Settings, restart your phone, and you're done.

To be sure, is it really connecting? If there is wifi around, it may have been connected, if you are sure that there is no wifi, then it should be a mobile phone card.

If you are using a Huawei phone and can connect to Wi-Fi but cannot access the Internet, you can use the following methods to troubleshoot the problem:

1. If you are using a home network, it is recommended to connect to other WiFi or mobile phone personal hotspots for testing and troubleshooting

1.If connected to other wifi is normal.

1) Please do not stay away from the router;

2) Please check whether the broadband account expires, restart the router and restart the phone before trying;

3) If the router has been set to the blacklist and whitelist, you need to check whether the MAC address of the mobile phone is added to the router, if the router does not set the blacklist and whitelist, please power off the router and restart the attempt.

2.If you connect to other wifi, you can't get online.

1) Please turn the WLAN switch back on and try to connect;

2. If Jingdan uses a public network:

1.Try using it in a place with a small amount and confirm that the hotspot is working properly.

2.Please confirm whether you need to log in through the browser** before you can access the Internet after registration.

3. If some apps can't access the Internet: trouble.

Please open Settings, enter Traffic Management in the search box above and click to enter the Traffic Management page, click Application Networking, and check whether the WLAN permissions are checked for individual applications.

If the problem persists, we recommend that you back up your data (third-party apps such as QQ and WeChat need to be backed up separately) and bring your purchase voucher to the Huawei Customer Service Center for testing.

Take Xiaomi router, Huawei P40, EMUI10 as an example, the solution is as follows:

1. After the call, first turn off the power switch of the router, then wait for about 3 5 minutes, and then turn on the power switch of the router.

2. Then turn on your phone, find and open Settings.

3. Click WLAN on the settings interface, enter the WLAN interface, select the network you want to connect to, and then click Delete.

4. After that, click on the network you need to connect to again, and enter the wifi password to connect.

This answer applies to most brands of mobile phones such as Apple, Huawei, and Xiaomi.

If the mobile phone wifi shows that it is connected but cannot access the network, you first need to check whether the network cable is connected correctly, if the network cable is correct, it is possible that the IP address and DNS address of the wireless network cannot be obtained, resulting in the inability to access the Internet, you can follow the following methods:

Start by turning on your computer;

Then click on the network icon and right-click on the option that appears on the icon;

Then click Change Network Adapter, select the connected network, right-click to select the status, select Properties, continue to select IPv4, and click Properties;

Finally, modify it to get it automatically.

1. The wifi itself is a problem, the wifi may not be connected normally, resulting in the inability to access the Internet; 2. Router problems, the router may be overheated or damaged; 3. There may be broadband arrears, resulting in inability to access the Internet; The name contains Chinese, which makes some mobile phones unable to connect to the Internet; 5. There may be a problem with the mobile phone system, which may cause the connection to wifi but the Internet cannot be accessed.

The penetration rate of the network is already very high, and now many people have begun to use wifi to access the Internet, even at home, but for many people, it is still difficult to set up a simple home wireless network, some people's mobile phones have been connected to wifi before, and suddenly they can't be connected, the reasons are as follows: 1. The wifi itself is a problem, and the wifi may not be connected normally, resulting in the inability to access the Internet; 2. Router problems, the router may be overheated or damaged; 3. There may be broadband arrears, resulting in inability to access the Internet; The name contains Chinese, which causes the mobile phone of the department to be unable to connect to the Internet; 5. There may be a problem with the mobile phone system, which may cause the connection to wifi but the Internet cannot be accessed.

Here's how to fix it:

Method 1: Settings-General-WLAN-Turn off the WLAN function, turn it off and then turn it back on and then reconnect to the WiFi. Connect to wifi with a mobile phone, after the initial successful connection, the mobile phone will retain a network IP address assigned by the wifi connection, it will be applied to the current wifi, if there is no address conflict, then you should be able to surf the Internet normally, but if there is an IP conflict, you can use the above methods to try to solve.

Method 2: Settings - General - WLAN - Select the wifi with abnormal connection - click the wifi signal icon on the right - click Cancel Save - then re-enter the password and reconnect, so that the operator can get a new address and connect normally.

Method 3: If the connection to WiFi stays in the verification stage and cannot connect normally, you need to check whether the WiFi password is entered correctly, whether the WiFi password has been changed, or whether the security rules of the router are set correctly.

If the above three tricks do not succeed in solving the problem, we can try to check the advanced settings of the WLAN on the mobile phone. Settings - General - Wi-Fi - Select Connect to the Wifi and press and hold - Select Modify Network - Show advanced selection, view and change ** and IP settings according to router security rules. In most cases, ** and port settings won't be changed, but when there are common problems with WiFi, you can't go wrong with choosing to view these items.