Does the Happy Tree grow new branches from the cut branches when it is cut off?

Updated on home 2024-06-29
14 answers
  1. Anonymous users2024-02-12

    The Tree of Happiness. Will cutting off a branch still grow new branches from where it was cut?

    There are axillary buds in the lower part to germinate new branches.

    There are four main ways to prune the happy tree:

    1. Topping. It is also called to remove the tip and top, which is to pinch or cut off the top of the main stem or side branch of the happy tree by hand to break the top advantage of the plant.

    Promote the germination of the lower axillary buds, inhibit the growth of branches, promote the multi-branching of the plant, and form a multi-flower head and a graceful plant shape.

    If you want more germination under the tree of happiness, you can use this method

    In the picture below, pruning is called topping.

    2. Wipe your head. If the tree of happiness grows too tall, it will be ruthless, if the tree of happiness is maintained indoors, you can see off the trunk or side branches that grow too tall at any time, provided that the average room temperature is above 18 degrees.

    With proper care after wiping your head, the Tree of Happiness will come back to life!

    Position 4 in the picture above or trim at the bottom can be done.

    3. Sparse cutting. This includes thinning pruning of branches, leaves, buds, flowers and adventitious buds. When the tree grows too vigorously and the branches and leaves are too dense, some of its branches should be thinned or the overly dense leaves should be removed in a timely manner to improve the ventilation and light transmission conditions.

    Don't be reluctant, after all, the branches and leaves are too dense, and it will also have a bad impact on the happiness tree itself.

    For example, in the picture below, the ...... of the Happy Tree that needs to be pruned urgently

    4. Plastic surgery. Happiness trees generally have one main trunk and then multiple side branches, and only the side branches can be pruned.

    It is also best to prune the side branches in an irregular triangular shape.

    As a standard, when the middle side branches are decapitated (sawed off), they should be higher than the side branches on both sides, so that the shape of new shoots and leaves will be more visible after they grow later.

    Only by pruning diligently can you make your family's happy tree grow healthily.

  2. Anonymous users2024-02-11

    Yes, there are hidden buds on the trees, and when the normal shoots are pruned, the hidden buds will re-emerge and grow new branches and leaves.

  3. Anonymous users2024-02-10

    The branches of the happy tree must be cut off, otherwise the growth will be messy and the plant shape will not be beautiful!

  4. Anonymous users2024-02-09

    If you want him to have enough space, keep it if you don't want to.

  5. Anonymous users2024-02-08

    The Happiness Tree cannot be pruned completely in autumn, and if the Happiness Tree is completely pruned in autumn, the tree will freeze to death in winter, and it will not be able to grow new branches and buds in the next year. Although pruning the Happy Tree in autumn can help the Happy Tree survive the winter safely, the pruning should not be too large.

    To prune the Happy Tree in autumn, you need to prune the branches and leaves that are too dense to avoid the branches and leaves that are too dense and cannot receive light inside. Then it is to cut off the head and remove the crown completely, leaving only the trunk and forks to ensure that the happy tree can grow taller in the coming year.

  6. Anonymous users2024-02-07

    Is it necessary to cut off all the branches every year for a good happy tree?

  7. Anonymous users2024-02-06

    The happy tree needs to be pruned, and the branches of the happy tree need to be pruned regularly, which can reduce the consumption of nutrients and help the plant grow vigorously, so in the pruning process, it is necessary to cut off useless branches such as dead branches, sick and weak branches, too long branches, and too dense branches, so as to increase the ventilation and light transmittance between the happy trees, and pay attention to spraying carbendazim and other agents on the wound after pruning.

    The happy tree needs to be pruned, due to the vigorous growth of the plant, regular pruning of the branches of the happy tree can reduce the consumption of nutrients, which is conducive to the vigorous growth of the plant, as well as maintain the ventilation and ventilation of the happy tree shape, in addition, the pruning tools should be disinfected before pruning.

    In the process of pruning the happy tree, it is necessary to cut off the dead branches, sick and weak branches of the plant, and shorten the excessively long branches of the happy tree to reduce nutrient consumption.

    After the pruning of the happy tree is completed, it is necessary to spray carbendazim or chlorothalonil and other fungicides to the wound to prevent infection with germs and affect the growth and development of the plant.

    Before pruning the happy tree, it is necessary to disinfect the pruning tools, which can be placed in potassium permanganate solution to avoid germs on the knife edge and affect the healing speed of the wound.

  8. Anonymous users2024-02-05

    Happy tree can be pruned, he is generally pruned in July, because pruning in the peak growth period is conducive to the growth of new branches, can also be pruned in winter, appropriate pruning during the dormant period can help it survive the winter safely, pruning topping limits the growth height, thinning the branches to increase ventilation, reduce the loss of nutrients, proper pruning can avoid the breeding of pests and diseases.

    Happiness tree pruning.

    Happy tree can be pruned, he Zheng Shiyu is generally pruned in July, because pruning in the peak growth period is conducive to the growth of new branches, can also be pruned in winter, appropriate pruning during the dormant period can help it survive the winter, pruning topping limits the growth height, thinning the branches to increase ventilation, reduce the loss of nutrients, proper pruning can avoid the breeding of pests and diseases.

    Happiness tree pruning method.

    1. Topping.

    To prune the top buds of the happy tree, you need to prune off the top buds of the plant, or pinch it off directly by hand, which can effectively limit the height of the happy tree, and the height of the potted plants kept indoors is relatively limited.

    2. Sparse cutting

    When the happy tree is growing, there will be dense branches, at this time, the dense part should be pruned off, so that it can be better ventilated, but when the sparse section is pruned, it should be pruned along the growth direction of the branches.

    3. Plastic surgery

    The Happiness Tree will generally grow multiple side buds, at this time you can shape it according to your favorite shape, and the side branches on the side of the Happiness Tree can be pruned, otherwise the ends will be too high, and it will be more ornamental after pruning.

    Precautions for pruning the happy tree.

    After pruning in spring, it should be noted that it should be in accordance with the principle of thin fertilizer and diligent application, proper fertilization, supplemental nutrients, to help it return to normal growth, so that it can grow into lush branches and leaves in summer, and the leaves are dazzling.

  9. Anonymous users2024-02-04

    The Happiness Tree sprouts about a week after pruning.

    The pruning of the happy tree is recommended to be carried out in July every year, pruning is aimed at stunted, long, diseased branches and leaves, as well as overgrown branches, after the completion of pruning, it is necessary to strengthen the management of the plants that are suspicious of filial piety, control the light, be careful of socks and water, and ensure that the plants quickly resume growth.

    1. Pruning time for the pruning of the happy tree, it is recommended that you carry out it in July every year, when the climate is warm and the light is sufficient, which is more conducive to the growth of the happy tree, and the vitality of the branches is also the strongest, and the plant can resume growth more quickly after pruning. In addition, when the tree enters the dormant period in winter, it can also be pruned appropriately to promote the growth of the plant.

    2. Pruning object for the pruning of the happy tree, it is generally for the stunted, long, diseased branches to avoid unnecessary loss of nutrients and promote the growth of the plant. Plants also need to be combed when overgrown branches appear to increase the translucency of the plants.

    3. After pruning, we must strengthen the management of the plant after the pruning of the happy tree, and we must control the light and moisture of the environment in the early stage, put it in a semi-shaded and ventilated environment, and keep the soil slightly moist, so that the plant can resume growth as soon as possible is the most important.

  10. Anonymous users2024-02-03

    Hello, the tree of happiness grows new branches and leaves, not the old branches and leaves will fall, oh pro-cave travel, the tree of happiness is the same as its plants, the shedding of old branches and leaves is directly related to the growth of new branches and leaves. The main reason for the shedding of old branches and leaves of Happy Tree Town is improper control of water and fertilizer, which will cause root rot and lead to leaf loss. At the same time, the indoor light is too dim, and poor ventilation will also cause the Na finger leaves, if not in the cold winter, it can be moved to the balcony, let it ventilate and see the light, can quickly extract new leaves.

    Do you have any questions that I would like to answer for you?

  11. Anonymous users2024-02-02

    Phaseolus vulgaris is the "happy tree", the scientific name of the bean tree, which likes high temperature, humidity and sunny environment. High temperature resistance, cold resistance, should be moist, avoid dryness. Loose, fertile, well-drained, organic-rich loam and sandy loam soils should be used for cultivation.

    The flowering period is from May to September, and the fruiting period is from October to December.

    In addition to adding an appropriate amount of rotting cake fertilizer and 3% compound fertilizer to the cultivation soil, potted bean trees should also be continuously given to chase happiness tree fertilizer. During the growing season, fast-acting liquid fertilizer can be watered once a month, usually with well-rotted cake fertilizer water. A small number of potted plants at home, or large potted plants that have been displayed in public places for a long time, can be regularly buried with a small amount of multi-release slow-release compound fertilizer granules, and urea plus potassium dihydrogen phosphate mixture can also be used for pouring.

    For potted plants in northern China, potassium dihydrogen phosphate can be applied 2 to 3 times in a row after the Mid-Autumn Festival to increase the cold resistance of the plants and help them survive the winter safely. After the temperature is higher than 32 in summer and lower than 12 in late autumn and early winter, top dressing should be stopped.

  12. Anonymous users2024-02-01

    Don't worry, it can grow.

    The "Happiness Tree" is actually a bean tree, which likes high temperatures, humidity and sunny environments. Afraid of cold, avoid dryness, very easy to raise. After pruning the branches and leaves, due to the reduction of nutrients consumed, the respiration is weakened, so do not water too often, do not use top dressing, prevent root rot, and pay attention to ventilation and light.

    It is very easy to maintain in this season, just maintain it according to the general flowers and trees. May your tree of happiness grow new leaves soon.

  13. Anonymous users2024-01-31

    I have it now, and there are two in the pot, twenty or thirty centimeters high, but very thin, and the leaves on the top are heavy, and they are bent more and more. The other day I had to cut off the top section, and in the past two days the trunk has begun to sprout. One is the "armpit" at the top, where there are two small protrusions at the root of the branches on both sides.

    The top, bottom, and bottom of the other tree also seem to be about to sprout. But whether new branches will grow in the future, I can't guess... If it is professional, it may be necessary to apply medicine on each small protrusion to promote germination??

    Regarding humidity and light, according to my experience, you must not dry, that is, you must not wait until the soil is almost dry before watering, at this time the leaves will soon turn yellow and the branches will fall. It should be watered when it is relatively dry, and I poured it until the water seeped out of the pot. Light, the Internet basically says to bask in the sun, but my experience is that it will soon have yellow leaves and branches.

    Scattered light should be done indoors as well. Anyway, the hot wind blowing and the cold wind blowing will be "finished". However, if your happiness tree is already a "tree" that is 1 meter tall, it may not be the same as when you were young?

    FYI.

  14. Anonymous users2024-01-30

    If the roots are not dead, new leaves can grow, but it will take a while!

Related questions
7 answers2024-06-29

Formaldehyde can be absorbed.

The potted tree of happiness can remove indoor odors, can effectively absorb formaldehyde and benzene, and is the preferred plant for the house after decoration. The Happiness Tree can be used as a "high-efficiency air purifier" in the new home. At the same time, the Happy Tree can also absorb carbon dioxide and release oxygen at night, increasing the content of negative ions in the air and increasing air humidity. >>>More

5 answers2024-06-29

Here Xiaoyou will teach you the most classic four tricks, the first trick: the happy tree likes acidic soil; The second trick: ventilation is very important, and the happiness tree placed indoors must be frequently opened for ventilation; The third trick: temperature control; The fourth trick: rain is the best source of water for the tree of happiness.

2 answers2024-06-29

Happy tree can germinate about a week after the completion of pruning, the pruning of the happy tree is recommended to be carried out in July every year, pruning is for stunted growth, long, diseased branches and leaves, as well as overgrown branches, after the completion of pruning need to strengthen the management of the plant, control the light, water, to ensure that the plant quickly resumes growth. >>>More

12 answers2024-06-29

The tree of happiness is most afraid of being put together with sundries, This will destroy its effect, and may lead to bad things, so when we put the happiness tree, we must clear the debris next to it, and the happiness tree is most afraid of placing it in the bathroom, the bathroom is the worst place in feng shui, so that the happiness tree has no way to attract wealth and break the fortune, so we must remember not to put the happiness tree next to the bathroom. <> >>>More

8 answers2024-06-29

Once every three days. When watering the happiness tree, the number of watering can be adjusted according to the change of seasons, and in the spring and autumn seasons when the temperature is more suitable, you can water it every three days. >>>More