How to maintain solid wood furniture and what should I pay attention to in maintenance?

1. Dust removal and maintenance. The most basic practice of solid wood furniture maintenance is to dust the surface, prepare a soft dry towel, and do not use a wet towel to gently wipe the surface of the furniture to wipe off the surface dust.

2. Cleaning and maintenance. If solid wood furniture is contaminated with pollutants or oil fumes, you can use a professional wood furniture cleaner, which can help remove stains and protect the surface of the furniture from corrosion.

3. Avoid scratches. Solid wood furniture should avoid scratches when used, and do not place hard objects or metal products on the surface of the furniture. If you accidentally get scratches, you can choose a wax strip similar to the surface of the furniture, apply it to the scratches, and finally apply the wax again to maintain the gloss.

4. Waxing maintenance. Solid wood furniture waxing maintenance is very important, generally 3-4 months waxing, using professional solid wood furniture varnishing wax maintenance. It should be noted that solid wood furniture should never use silicone polish, which will damage the coating of the furniture and hinder the air permeability of the wood.

Solid wood furniture is a very precious piece of furniture, more expensive in terms of **, if you have to buy solid wood furniture at home, you must pay attention to daily maintenance, you can refer to the above specific practices.

Maintenance steps for wood wax oil furniture:

Dusting, if there are scratches, stains, etc., also do a simple sanding, and then wipe the surface clean.

Rub wood wax oil. Dip the wood wax oil with a dry cotton cloth that does not shed, wipe evenly along the wood grain, focus on the end face of the wood, and then wait for 3-5 minutes to wipe off the excess wood wax oil on the surface.

Repair steps for hot wax furniture: After the top of the table and coffee table is scratched, or after long-term contact with water, heat sources, and hard objects, there may be a mark on the bottom of the cup, whitishness, roughness, etc., which can be based on the individual.

1. Do not go near the heat source, too high the temperature may cause them to crack or deform, so try to place them away from the heat source such as radiators. If it is a dining table, pay more attention to this, pay attention to the use of insulated mats.

2. Ensure humidity, especially in the dry and cold winter, the weather is dry, and the use of heating makes the indoor humidity lower, so we can prepare humidifiers and raise some green plants. However, don't let the environment get too wet, as this can also have an impact on your home.

3. Avoid physical injuries, such as collisions or squeezing, especially if there are children at home, do not bump them. Also avoid putting heavy items on them, especially wardrobes, as this may cause them to deform and not open for a long time, so be gentle when using them.

4. Clean up the dust in time, if it is a family that loves to open the window, it may be easier to leave dust on the furniture, so it is necessary to scrub frequently, and you can use a wet cotton cloth to wipe it, which can remove the dust and not hurt the furniture. After that, you can also wipe it again with a dry cotton cloth to prevent excessive moisture residue.

If there are stains on the surface of solid wood furniture, it cannot be wiped vigorously, nor can it be decontaminated with chemical solvents such as alcohol and gasoline. It is recommended to wipe with warm tea. If the weather is wet, it is advisable to separate the furniture from the ground with a thin rubber mat and pay attention when placing the furniture.

Try to keep the distance between the furniture and the wall at about 1 cm, which is conducive to the ventilation of the back of the furniture and will not produce mildew and other phenomena.

5. Waxing does not need to be too frequent, generally once every three or four months. This preserves the aesthetics of the furniture and prevents them from cracking.

It must be cleaned regularly, my friend bought solid wood furniture last year, when he bought Xiangfeng solid wood furniture, the shopping guide said that the factory regularly comes to service, smearing some wood wax oil, so that the brightness of the furniture is maintained for a long time, usually they should pay attention not to let the moisture, but also can not use chemical solvents to clean the solid wood furniture.

Solid wood furniture maintenance to avoid moisture, to keep dry and cool, in that environment, will maintain the function of solid wood furniture, etc., all aspects will not be affected.

It has reached the beginning of winter, the weather is getting colder, how to survive the winter with solid wood furniture? In winter, the change of indoor temperature and humidity will give different degrees of damage to solid wood furniture, cracking and deformation and other phenomena may exceed any season, and "moisturizing" and "maintenance" need to be more meticulous. Today, Xi Mengbao will tell you about the maintenance of solid wood furniture in winter

Maintaining humidity is key.

Solid wood is easily affected by environmental humidity, and changes in swelling and shrinkage. In winter, the indoor air is relatively dry, which is prone to cracking that is difficult to repair. By using a humidifier, placing a basin of water or some green plants indoors, the indoor humidity can be improved (increased), and the cracking of solid wood furniture can be effectively solved.

At the same time, when going out, try to close the curtains and close the doors and windows tightly to prevent cold air from entering and making the room dry.

It is important to stay away from heat sources.

Many people use heating equipment in winter, and remember to keep these devices away from furniture, at least about one meter. If you eat hot pot or soup at home, remember to place a thermal insulation pad on the surface of the utensils and furniture to avoid "burning" the solid wood furniture and causing cracking.

Daily maintenance is indispensable Clean up the dust regularly.

Dust not only affects the appearance, but also accelerates the aging rate of furniture, so be sure to clean solid wood furniture regularly. When cleaning, try not to touch the surface of the wood with sharp cleaning tools, and always be careful not to let hard metal products or other sharp objects directly collide with the furniture to protect the surface from hard damage.

Waxing locks in moisture.

Solid wood is just like **, water and oil are indispensable, and it needs to be maintained to a balanced state. The same is true for solid wood furniture, which cannot only rely on the humidity of the indoor air to maintain, but also needs to be waxed regularly to lock in the moisture in the wood and prevent the furniture from losing moisture and causing cracking and deformation.

It should be noted that waxing once a quarter is sufficient, which not only plays a protective role, but also does not damage the appearance of the furniture coating due to excessive waxing.

If you find that the furniture is slightly cracked or deformed during the heating period, don't worry, contact your exclusive customer service, and we will provide you with intimate service and satisfactory solutions in a timely manner.

Solid wood furniture is loved by consumers for its environmental protection, health, durability and other characteristics, and I will share a few maintenance methods for solid wood furniture:

Dust removal and maintenance. Prepare a soft, dry towel, without getting wet, and gently wipe off the dust from the surface of the furniture along the texture of the wood.

Cleaning and maintenance. Use professional wood furniture cleaners to remove dirt, oil smoke, excess wax, etc. from the air.

Avoid scratches. In the process of use, it should be avoided as much as possible to avoid damage caused by direct contact between hard objects or metal products and furniture.

Scratch care. If you accidentally get a small scratch, you can choose a wax strip similar to the color of the furniture wood to apply the scratch to fill the crack, and then apply wax to the area once to maintain the gloss.

Waxing maintenance. If you want solid wood furniture to have a lasting luster, waxing is very necessary, generally speaking, waxing once a quarter, and using professional solid wood furniture polishing wax for regular maintenance.

Solid wood contains water, and furniture shrinks when the air humidity is too low and expands when it is too high. Therefore, you must pay great attention to the furniture when using it at ordinary times, and do not place the furniture in a place that is too humid or too dry, such as in winter, near a hot place such as a stove and heating, or in a place that is too humid in a basement or warehouse.

When handling or moving furniture, it should be handled with care, and should not be pulled hard, so as not to damage the mortise and tenon structure. Tables and chairs can not be lifted, easy to fall off, should be lifted from both sides of the table and the chair source surface, the cabinet is best to remove the cabinet door and then lift, can reduce the weight, but also avoid the cabinet door activities. If you need to move particularly heavy furniture, you can use a soft rope to put it under the furniture chassis and lift it again.

Never wipe down furniture, especially old furniture, with a wet rag or a rough rag. To use a clean and soft cotton cloth, add a little furniture wax or walnut oil after a while, and gently rub it back and forth along the wood grain.

[Daily attention].

Avoid direct sunlight, which can easily lead to cracks and fading of furniture for a long time.

Keep a distance of at least 30 cm from radiators and air conditioners.

Direct contact with things that are too hot (cigarette butts, etc.) should be avoided, and it is recommended to place a thermal insulation pad when placing hot soup.

Wipe off water stains and stains in time, and wipe them with a semi-dry or dry rag. (Be careful not to use a rough cloth to avoid scratching the surface of the furniture).

Avoid scratches with hard objects, and be careful not to let hard metal products or sharp objects scratch the furniture during use.

Avoid placing heavy objects, as long-term exposure to heavy pressure will deform the furniture structure.

Acids, alkalis" and other corrosive chemicals are strictly forbidden to touch the surface of furniture.

Dust removal in time. Quarterly maintenance] (It is recommended to do maintenance at least once a quarter when the humidity is stable.) ）

Wipe with wood wax oil.

The main ingredients of wood wax oil: the raw materials are mainly made of catalpa oil, linseed oil, soybean oil, pine oil, carnauba wax, vegetable resin and natural pigments, and the pigments used in coloring are environmentally friendly organic pigments. Therefore, it does not contain toxic ingredients such as triphenyl, formaldehyde and heavy metals, has no pungent odor, and can replace the pure natural wood coating of paint.

Utensils needed: wood wax oil, soft cotton cloth, sandpaper, gloves.

Steps:1First of all, dust the furniture to be maintained, check the surface of the furniture, if there are more scratches, you can use sandpaper to polish it first, remove the stains and scratches on the surface, and wipe the sanded sawdust clean.

2.Use a soft cotton cloth that does not shed hair to dip the wood wax oil, spread the wood grain evenly, wipe the edges and sides first, and then wipe the middle part, paying special attention to the position of the wood port. Make full contact between the wood wax oil and the wood surface.

3.After wiping, let the furniture sit to dry for 12 hours. (You can also look at the absorption of furniture after standing still for a period of time, and wipe the wood wax oil twice). Then wipe it off with a clean, soft cotton cloth.

We have always believed that wood is also alive, and if you take care of it, it will accompany you as you go through the years.

Precautions for use.

1.Keep the furniture in the sky for 15 days and 20 days before use, and properly maintain air circulation to eliminate residual odors in the paint on the surface of the furniture.

2.Place items smoothly, heavier items should be placed at the bottom (layer) of the furniture to prevent the center of gravity of the furniture from falling over unsteadily. Heavy objects should not be placed on the top of the large wardrobe, so as not to cause the roof to sag and deform and affect the opening of the door.

3.Avoid children from getting close to glass, mirrors, sharp angles, etc. of furniture.

4.Avoid prolonged sunlight on furniture to avoid local discoloration or fading.

5.The doors and drawers of furniture should be opened with appropriate force, and it is strictly forbidden to open and close suddenly, resulting in loosening of the structure.

6.Do not store furniture in a humid environment, away from flooding and excessive heat, such as air conditioning vents and radiators.

7.Do not place hot drinks or food directly on furniture, you need to put on a thermal insulation pad.

Care instructions. 1.During daily maintenance, do not use hard objects to wipe the surface of furniture and mirrors. Do not allow acidic or alkaline chemicals to come into contact with the surface of the furniture. It is recommended to use a soft, slightly damp cotton cloth to clean and then wipe it again with a clean soft cotton cloth to avoid moisture remaining on the surface of the furniture.

2.Regular maintenance: Generally, it should be maintained once a quarter, wipe the dust on the surface of the furniture with a clean soft cotton cloth, evenly wipe the surface with the special glazing wax for the furniture, and then wipe it with a clean soft cotton cloth later, so that the surface coating of the furniture can continue to shine.

3.Activity hardware accessories such as door hinges and drawer guide rails should be regularly and appropriately added with some special lubricating oil.

4.Maintain proper temperature and humidity in the room to avoid shrinkage, cracking, and deformation of furniture parts.

Solid wood furniture is beautiful and generous, but maintenance is more troublesome, so what are the maintenance precautions? PCHOUSE will explain it to you. 1. Try to use a soft cushion under the hot dish tray to prevent the food and seasoning from flowing out, staining or destroying the tabletop.

2. Avoid letting the solid wood furniture surface touch the corrosive liquid, ethanol, nail polish, etc.

3. Pay special attention to keeping the air dry in the room to prevent solid wood furniture from getting damp and moldy.

4. Do not put it under strong sunlight, nor can it be placed in a low temperature and dry place to prevent wood cracking and deformation.

5. For solid wood furniture such as large wardrobes and closets, the top cabinet should not be pressed with heavy objects, otherwise the cabinet door will often appear uneven, so that the door is not closed tightly.

6. From time to time, use a soft cloth along the grain of the wood to dust the solid wood furniture, before dusting, you should dip some spray on the soft cloth, do not wipe it with a dry cloth, in order to prevent wiping.

7. When the furniture is used in a lower temperature and dry indoor environment, artificial humidification countermeasures need to be selected, such as: regularly scrubbing solid wood furniture with a soft cloth dipped in water.

8. Polishing and waxing regularly, with an interval of 6-12 months, use paste wax to apply a layer of wax to solid wood furniture. Before waxing, you should add a milder non-alkaline soap to wipe off the old wax.

How to do maintenance of solid wood furniture:

1. Pay attention to the cleaning and maintenance of the surface of solid wood furniture;

2. Avoid removing stains with alcohol, gasoline or other chemical solvents;

3. Avoid scratches by hard objects;

4. Keep away from heat sources;

5. Keep dampness away from furniture;

6. Avoid direct sunlight.

Precautions: a) Try to avoid large temperature and humidity differences between indoor and outdoor, resulting in cracks in solid wood furniture.

b) Try to avoid direct sunlight that causes moisture loss to solid wood furniture.

c) Try to keep a certain distance from radiators, etc., to avoid solid wood furniture from being baked.

d) Wax frequently to avoid wormholes and wear and tear on solid wood furniture.

Authoritative information**.