How to care, clean, maintain solid wood furniture

1. Pay attention to the cleaning and maintenance of furniture surfaces. The surface of solid wood furniture is coated with paint, and the maintenance and maintenance of its paint film is particularly important, once the paint film is damaged, it will not only affect the surface beauty, but also further affect the internal structure of the product. Therefore, the furniture should be kept clean frequently, every day with a pure cotton dry soft cloth gently try to remove the surface dust, every once in a while, with a wrung out of the wet cotton silk to clean the dust at the corners of the furniture, and then use a clean dry soft cotton cloth to dry it, you can also apply a thin layer of high-quality wax after drying, like wiping leather gently wipe out the gloss, which not only maintains the wooden furniture, but also increases its brightness.

However, we must be cautious when choosing bright wax, and we must not use inferior products containing chemically corrosive ingredients. 2 Avoid using alcohol, gasoline or other chemical solutions to remove stains. If there are stains on the surface of the furniture, do not rub it vigorously, you can gently remove the stains with warm tea, wait until the water volatilizes and apply a little light wax to the original part, and then gently grind several times to form a protective film.

3 Avoid scratches with hard objects. When cleaning, do not let the cleaning tools touch the furniture, and pay attention not to let hard metal products or other sharp objects collide with the furniture, so as to protect its surface from bruises. 4 Avoid humid environments.

In summer, if the indoor humidity is wet, it is advisable to use a thin rubber mat to separate the parts of the furniture that are in contact with the ground, and at the same time keep the gap between the wall part of the furniture and the wall at a distance of decimeters. 5 Keep away from heat. In winter, it is best to place the furniture at a distance of about 1m from the heating current to avoid long-term high baking, which will cause the wood to dry out and crack, deform and deteriorate the paint film.

6 Avoid direct sunlight. Prolonged exposure of outdoor sunlight to the whole or part of the furniture should be avoided as much as possible, and it is best to place it in a place that can avoid sunlight, or use transparent tulle curtains to separate direct sunlight. In this way, it does not affect the indoor lighting, but also makes the soft light add a little warm and romantic atmosphere to the room, and at the same time protect the indoor furniture.

For solid wood furniture, the public should pay attention to the cleaning and maintenance of the surface of the furniture. Regularly use a pure cotton dry and soft cloth to gently wipe off the surface dust, and every once in a while, use the wet cotton silk that wrung out the moisture to clean the dust in the corners of the furniture, and then wipe it with a clean dry soft cotton cloth.

Solid wood furniture needs to be wiped down regularly.

For solid wood furniture, the public should pay attention to the cleaning and maintenance of the surface of the furniture. Regularly use a pure cotton dry and soft cloth to gently wipe off the surface dust, and every once in a while, use the wet cotton silk that wrung out the moisture to clean the dust in the corners of the furniture, and then wipe it with a clean dry soft cotton cloth.

If there are stains on the surface of the furniture, do not rub it vigorously, you can gently remove the stain with warm tea, wait until the water evaporates and apply a little light wax to the original part, and then gently rub it several times to form a protective film.

When cleaning, do not let the cleaning tools touch the furniture, and pay attention not to let hard metal products or other sharp objects collide with the furniture, so that there are no traces of bruises on the surface.

At the same time, it should be avoided as much as possible to avoid long-term exposure of outdoor sunlight to the whole or part of the furniture, so it is best to place it in a place that can avoid the sun. In this way, it does not affect the indoor lighting, but also protects the indoor furniture.

How to make solid wood furniture glow.

The placement of wooden furniture should be avoided from direct sunlight, and the furniture should not be close to the furniture when using the heater or fireplace in winter to prevent the furniture from fading and cracking.

Keep the room ventilated and dry, and do not let the wooden furniture always be in a humid environment to avoid mildew of the furniture. If the climate is particularly dry, wipe the surface with a slightly damp flannel cloth to prevent warping.

Do not touch wooden furniture with rough and sharp objects or liquids such as strong acids and alkalis.

The dirt on the surface of wooden furniture should be wiped off frequently and in a timely manner.

After the wooden furniture is painted, it can be evenly coated with a layer of floor wax on the painted and dried wooden furniture, and then wiped with a clean soft cloth to keep the patent leather shiny for a long time. In addition, the surface of wooden furniture is often wiped with rice washing water, which can maintain the luster and brightness of its lacquer surface for a long time.

The painted surface of wooden furniture must not be hot, and if a teapot filled with hot water is placed on the lacquered surface of the furniture, the surface of the table will be damaged. In this case, you can use an alcohol-soaked cloth to wipe the paint damage to make the scar less visible, but this method can only be used once.

<>1. Beware of scratches from hard objects. Do not allow hard metal objects or other sharp objects to collide with the furniture and protect its surface from bruises. When performing hygienic maintenance, do not scratch the furniture with hard cleaning tools.

2. Keep away from heat sources and sunlight. In winter, it is advisable to place the furniture about 1 meter away from the warm current, such as radiators or air conditioning outlets, to avoid local cracking, deformation or deterioration of the wood after the solid wood furniture is baked by the heat source for a long time. And of course, don't let direct sunlight hit the furniture.

3. Keep the surface clean. The surface of solid wood furniture is coated with paint, and the maintenance and maintenance of its paint film is particularly important, once the paint film is destroyed, it will not only affect the surface beauty, but also further affect the internal structure of the product. Therefore, the furniture should be kept clean frequently, gently wipe off the surface dust with a cotton dry cloth every day, and wipe the dust on the corners of the furniture with a wet cotton cloth that wrung out the moisture every once in a while, and then wipe it dry with a clean dry cotton cloth.

It can also be wiped dry with a thin layer of high-quality polish wax to gently wipe off the shine like leather, which not only maintains the solid wood furniture, but also increases its shine. However, we must be cautious in the selection of light wax, and we must not use inferior products containing chemically corrosive ingredients.

4. Avoid alcoholic gasoline. If there are stains on the surface of the furniture, do not rub it vigorously, you can gently remove the stains with warm water, wait until the water evaporates and apply a little light wax to the original part, and then gently rub it several times to form a protective film. Avoid using alcohol, gasoline or other chemical solvents to remove stains that can damage the furniture.

5. Be alert to humid environments. In summer, the indoor humidity is high, especially on the first floor, so it is advisable to use thin film to separate the parts of the furniture that are in contact with the ground, and try not to keep the furniture close to the wall, but to maintain the distance from the wall.

6. Water lock treatment should be carried out. Not only should you wipe it with a damp cloth, but you should also use professional furniture care essential oils. Some special ingredients contained in essential oils can lock in moisture in the wood, prevent it from drying out and deforming, and at the same time nourish the wood, make the wood shine from the inside out, and more importantly, prolong the life of the wood furniture.

In addition, although some carved solid wood furniture is more beautiful, it is necessary to pay attention to dustproof when using, especially when the indoor air is dry, the carved furniture is more likely to be stained with dust, and it needs to be wiped with a semi-wet towel frequently.

1. Dry-proof and moisture-proof: too dry and humid environment is not conducive to the storage of wooden furniture. For wooden furniture, in a too dry environment, the moisture in the firewood will be dissipated, and the wood will become shriveled, brittle and hard, and easy to break.

In too humid environments, wood can absorb water, causing it to swell, deforming the furniture and affecting its aesthetics.

2. Frequent dust removal: regular dust removal can prevent dust particles from rubbing against the surface of solid wood furniture and damaging the aesthetics. Dust is everywhere, so we need to take care of wooden furniture frequently.

Dust is made up of particles, and if not cleaned frequently, then the particles will rub against the skin of our wooden furniture, which will destroy the aesthetics of the furniture.

3. Pay attention to moth erosion: prevent and control insect control drugs to prevent moths from invading wooden furniture. Wood products generally have the derivation of moths, especially in a humid environment, insects will be easier to survive, and the breeding of borers will accelerate the corrosion of wooden furniture.

You can buy some deworming drugs to solve the root cause of insect reproduction.

4. Regular waxing: regular waxing to prevent drying and moisture, increase surface gloss, and effectively inhibit the growth of bacteria. Waxing is like adding a protective film to wooden furniture, which is equivalent to effective anti-drying and moisture-proof measures, waxing makes the surface of wooden furniture look more shiny, with a new feeling, and the wooden surface will not produce moths after waxing, effectively inhibiting the growth of bacteria.

1. Solid wood contains water, and hardwood furniture will shrink when the air humidity is too low, and expand when it is too high. Generally, solid wood furniture has a lifting and shrinking layer during production, but it should be noted that it should not be placed in a place that is too humid or too dry, such as near a high temperature and high heat place such as stove heating, or a place such as a basement that is too humid, so as not to produce mildew or dry cracking.

2. Solid wood furniture sticks to the oil, residual tea is an excellent detergent, after wiping, spray a small amount of corn flour to wipe, and finally wipe the corn flour. Corn flour absorbs all the dirt that adheres to the surface of the furniture, making the paint smooth and bright.

3. If the surface of solid wood furniture is white wood paint, it is easy to turn yellow over time, you can wipe it with a rag dipped in toothpaste, and be careful not to use too much force. You can also stir the two egg yolks well, apply them to the yellowed area with a soft brush, and carefully wipe them clean with a soft cloth after drying.

4. Avoid placing too heavy items on the surface of the furniture for a long time, otherwise the furniture will be deformed. Even if it is a table made of solid wood, it is not suitable to lay non-breathable materials such as plastic cloth on the tabletop

5. The surface of the furniture should avoid friction with hard objects, so as not to damage the surface texture of the paint and wood, such as placing porcelain and bronze and other decorative items to be particularly careful, it is best to pad a soft cloth.

6. If the floor in the room is uneven, it will cause the furniture to deform for a long time, and the way to avoid it is to use small wooden pieces to flatten it. If it is a bungalow or a low-lying house, the furniture legs must be properly raised if the ground is wet, otherwise the legs are prone to moisture corrosion.

7. Never wipe solid wood furniture with wet rags or rough rags. Use a clean and soft cotton cloth, add a little furniture wax or wood wax after a period of time, and gently rub it back and forth along the wood grain.

1. When cleaning the stains on the surface of the solid wood sofa, you can choose to wipe it with neutral soap liquid mixed with warm water, and then wipe it with water. This reduces the risk of dirt entering the surface of the solid wood through the paint layer.

2. When carrying or moving the solid wood sofa, it should be handled with care, and it should not be pulled hard, so as not to damage the mortise and tenon structure. If the floor in the room is uneven, it will cause the furniture to deform over time. In addition, if the floor is low, the furniture legs must be properly raised if the ground is wet, otherwise the legs are easy to be corroded by moisture.

3. Never wipe with a wet rag or a rough rag, especially on a hardwood sofa. Use a clean and soft cotton cloth, add a little furniture wax or walnut oil after a while, and gently rub it back and forth along the wood grain. After wiping the wooden sofa with a damp cloth, it should be wiped with a dry cloth immediately.

Due to the different surface paint treatment of various furniture, attention should be paid to the use of different maintenance methods, waxing is a good maintenance method.

4. When the solid wood sofa is used in a dry environment, artificial humidification measures are required.

5. Wax regularly, every 6-12 months, use paste wax for the armrests of wooden sofas and other layers of wax. Before waxing, the old wax should be wiped off with mild, non-alkaline soapy water.

6. Solid wood furniture has a long service life, which is both natural and environmentally friendly and healthy, but the change of moisture content makes it easy to deform, so it can not be exposed to direct sunlight, the indoor temperature can not be too high or too low, and too dry and humid environment is not suitable for solid wood furniture.

The main disadvantage of solid wood furniture is that it is easy to deform and difficult to maintain.

Wiping: Regularly wipe the surface dust of solid wood furniture with a dry soft cloth, pay attention to the corners of the furniture, and then wipe it with a wet cotton wire wrung out of the water, and finally wipe it with a dry soft cotton cloth.

Isolate heat sources: Keep the room dry, humidity and temperature are best not to change drastically, avoid direct sunlight, otherwise solid wood furniture is easy to deform.

Waxing: waxing every 6-12 months, pay attention to waxing, use milder non-alkaline soapy water to wipe off the old wax, regular waxing, can prolong the life of furniture.