How to review for the cost engineer exam 10

Is the cost engineer or the cost engineer of the national unified examination? Regarding the calculation rules, because of the exam, the buildings are very simple, generally 2 floors and 3 floors of small buildings, focusing on the calculation rules of the foundation, main body, and decoration of this type of structure. There is no way to theoretically stuff, I read it several times when I review, and the first time I want to see it, I want to see it comprehensively; The second time is to read each chapter with a focus on the review questions, and finally strengthen it before the exam.

It's useless to remember what to say.

At present, the trend of the cost engineer examination is that there are more and more theoretical basic knowledge, and there are fewer and fewer engineering and technical problems, until only the theoretical basic knowledge is tested. Therefore, the focus of the review is self-evident, what is "investment", "fixed assets", "fixed asset investment", "construction project", "branch project", "single project" and other concepts must be mastered, but also pay attention to the distinction. For professional things, it is necessary to look at the method of finding the comprehensive unit price, and remember the local fee rate, profit rate, management fee rate, ultra-high fee rate and other figures; Familiarize yourself with the description of the project quota.

As for the last picture question, you can do it when you have time, and give it up if you don't have time, because you don't necessarily get a full score even if you spend a long time, and as long as there is a little mistake, the deduction is very serious, and you can score points by listing several things that don't need to measure the length and area, don't spend a lot of time on this question.

Good luck passing your exams.

For the theory part, I suggest that you systematically read the book and find some questions from previous exams to do, so that you can do it. I took the exam last year, because I was busy with work, and I didn't have time to read, so I just did the exam questions from previous years, and I think it is easier to memorize the questions when I do them. The main test calculation rules, because the exam time is limited, the questions are generally very simple and not too difficult, generally the first or second layer of brick concrete or frame, focus on the foundation, main body, and decoration of this type of structure on the calculation rules.

1. Learn to integrate knowledge points. Classify the information you need to learn and the knowledge you need to master, and make it into a mind map or knowledge point card, which will make your brain and thinking clear and easy to remember, review, and master. At the same time, learn to connect new knowledge with what you have already learned, and constantly integrate and improve your knowledge system.

This promotes understanding and strengthens memory.

2. Rational use of the brain. The so-called reasonableness is that the content to be reviewed alternately, which can make different parts of the cerebral cortex take turns to excite and inhibit, which is conducive to the enhancement and development of memory ability; The second is to memorize at the best time, which should generally be arranged in the morning and evening before going to bed, and be selected according to the peak period of your memory.

3. With the help of efficient tools. Speed reading and memorization is an efficient reading learning method, and its training principle is to activate the potential of the "brain and eye", cultivate the formation of an eye-brain direct reflection of the reading learning mode, and mainly practice to improve reading speed, attention, memory, comprehension, thinking and other aspects. After mastering, when reading articles and materials, you can quickly extract the key points, promote sorting and analysis, and improve the efficiency of comprehension and memory; At the same time, the fast reading speed can also save a lot of time and do other things with ease.

For specific learning, you can refer to the "Elite Special Whole Brain Speed Reading Memory Training Software".

Learning mind mapping, mind mapping is a way to concretize radioactive thinking, and it is also an efficient way to organize and promote understanding and memory. Not only can you systematize and visualize the information in your brain in memory, but also help you think and analyze problems and plan as a whole. However, it is not easy to learn mind maps well and use them flexibly, and it takes a lot of time.

The aforementioned "Elite Special Whole Brain Speed Reading and Memory Training Software" also has exercises and methods about mind mapping, which can be referred to.

4. It is necessary to do questions. When doing problems, you should learn to reflect, classify, and sort out the corresponding solution ideas. If you encounter a wrong question (whether you are careless or do it wrongly, you can't do it), it is best to collect these mistakes.

When we do pre-exam revision, they are the focus of revision to ensure that we don't make mistakes and lose marks on the same questions again.

2018 Cost Engineer Exam Study Method Sharing.

1. Focus on grasping the method. A good self-student never guesses a question.

However, it is feasible to focus on the test center before the test. Just three to five days before the exam, focus on understanding the key points and difficulties of the subject. If you have a lot of content and can't remember it, you can choose the "top priority" and memorize it strongly, and you will gain something.

2. Abstract learning method. In the process of self-study, summarizing while studying is a good way to improve learning efficiency. When doing synchronous practice questions and self-test questions, it is important to proofread and correct the usual summaries. It contributes to the deepening of knowledge.

3. Logical taxonomy. In the self-study review stage, you can appropriately break the restrictions of the textbook chapters, and compile a relatively concise logical relationship chart according to the logical structure of the whole book, which is a good way to review the systematization of knowledge.

4. Expand the problem. Many review reference books have multiple-choice questions, which are relatively large in number and have a large coverage. Therefore, when doing multiple-choice questions, it is necessary to comprehensively consider the knowledge points contained in the questions, the interrelationships and possible variations, which will help to complete the review quickly.

5. Argumentative questioning. The spark of truth will shine brighter in the collision; Proper arguments will deepen in memory. You may wish to argue and ask more questions among your classmates.

7. Empathy. In self-study, don't always think of yourself as a "student" and be in a passive position; Instead, you should constantly put yourself in the position of "sir", take the initiative, and generate different ideas.

8. When self-learning a major, don't just think of yourself as a candidate's practice topic, but imagine yourself as a senior industry person. In this way, you will apply what you have learned and benefit the exam.

9. Cross-application method. The multi-faceted and multi-disciplinary application of knowledge will stimulate greater effect on the learning of this course. This has been a successful approach in the history of science.

10. Classical Guidance. In self-study, you will often encounter confusion. This requires the application of the theoretical knowledge of the classical subjects that you have learned.

The above learning methods are for reference and hope they will be helpful to you.

I also buy related book collections, and find friends who have passed the exam for tutoring

Buy a cost red treasure book to review, and the learning effect will be much better with the textbook.

The classic solution published by the plan publishing house is also very good, and this book is the best in our unit.

There are no shortcuts to learning, and the only way is to be willing to work harder. If you don't have a foundation, you have to work harder than others, review more, and practice a few times. At the same time, it is necessary to pay proper attention to study skills.

Cost engineers have different focuses on different stages of exam preparation, candidates can grasp the time schedule, make a study plan, and find a learning strategy that suits them, so that the preparation can be easy and efficient.

Stage 1: Sort out the textbook and understand the content of the exam.

This stage is for the study of textbooks, because case analysis is a synthesis of the other three subjects, so first learn management, measurement, and pricing before learning cases.

This stage of learning is shallow, don't worry too much about individual content, but also can't simply look at the flowers, after learning to be able to clear the knowledge framework of the textbook, for the next stage of in-depth learning to lay the foundation.

Stage 2: In-depth study of important test points with exercises.

With the basic learning of the previous stage, we need to study the key and difficult points of each subject in depth with the practice questions of the relevant chapters.

Through this stage of study, it is necessary to master the test points of each chapter, and to understand each test point thoroughly, and know how to examine the articles in the exam.

Stage 3: Pre-exam simulation to develop a sense of exam.

Do a complete set of test papers in strict accordance with the test time and requirements. Pay attention to summarizing and summarizing past past past questions and grasp the ideas of the exam; Mock test papers should be selected and refined, and tactics should be avoided.

Through the practice at this stage, on the one hand, it will help us to grasp the time of the test, and on the other hand, it can maintain the activity of the knowledge system in our minds and strengthen the memory of the test center.

Stage 4: Strengthen memory before the test.

In the three subjects of management, measurement, and valuation, most of the exam questions are the original words in the book or have clear formulas, which is particularly important for such subjects.

Therefore, 2 to 3 days before the test, you must go through the important knowledge points and formulas, otherwise it is easy to have vague test points and missing formulas during the test.

Face-to-start review:

1.make a plan; The National Cost Engineer Qualification Examination has four training materials: "Engineering Cost Management Related Knowledge", "Engineering Cost Determination and Control", "Construction Engineering Technology and Measurement (Civil Engineering or Installation)", and "Engineering Cost Case Analysis". The textbook closely focuses on the requirements of the syllabus of the professional qualification examination, and explains it in simple terms, with a reasonable knowledge structure and rich content.

When studying, you should read at least twice, and the first time you have a preliminary understanding of the content of each chapter, whether it is the content that you are required to be familiar with and master in the "Outline", or the content you understand, you should read it to have an overall impression. Don't grasp the place you don't understand, avoid a problem stuck, delay time to solve it, and affect the progress of the mouth for the second time is the key to grasp, firmly grasp the main problems discussed in each chapter to understand, and extract the internal connections and differences between the knowledge points to prevent conceptual confusion.

2.timing; It is necessary to insist on l-2 hours a day, preferably in the early morning, so that the mind is clear, the understanding is profound, and the physical and mental exhaustion after a day of work is prevented, and reading books has no effect. The daily learning task is one or two sessions, don't be greedy, so that you will lose the learning interest and motivation for the next study due to fatigue, and don't arrange it at will, just watch it when you have time, even if you don't have time, you can't complete the learning task, and it's useless. Make a plan for your work and implement it carefully.

3.The examination subjects are: "Basic Theory of Engineering Cost Management and Related Regulations", "Engineering Cost Valuation and Control", "Construction Engineering Technology and Measurement" (this subject is divided into two majors: civil engineering and installation, candidates can choose one, the same below), "Engineering Cost Case Analysis".

Among them, "Project Cost Case Analysis" is a subjective question, and the rest are objective questions.

It's not difficult to say it's difficult, it's not easy to say it's easy, if you want to take out the college entrance examination, then this exam is not difficult, read more books and see.

Dedicated frequency, then genus.

Ichijo Remarks:

Guaranteed study time every day.

The most important thing at the moment is to guarantee the study time! Maintain at least 4 hours a day, and you can review basic subjects in the morning and professional subjects in the afternoon and evening. Among them, "Cost Management" and "Engineering Valuation" are basic subjects, and "Engineering Metrology" and "Case Analysis" are professional subjects.

I usually have to go to work, and I have leisure and entertainment during the holidays, so how can I have time to read? Xiao Wan wants to say that it will only be 4 hours, look at the mobile phone for a while, reduce socializing, this time can still be squeezed out.

Solidify the basics.

For students who have not yet started to prepare for the exam, the specific preparation suggestions are as follows:

Step 1: Quickly browse past past papers to find out the pattern of the exam.

Step 2: After browsing the past papers, then study the important chapters in "Cost Management", "Engineering Valuation" and "Engineering Metrology" (note that each chapter should be done while reading the book), especially the chapters related to case analysis. It turns out that the chapters related to case studies are also often the ones with the most marks in each subject.

Step 3: Go back and answer the past questions of each subject one by one to understand it thoroughly.

Step 4: Non-focused chapters for all subjects.

Make a study plan.

Don't set your goals too high so that they won't be difficult to accomplish and affect your confidence, and don't set them too low. It is recommended that you make a plan that meets your own conditions, and it is advisable to have some sense of accomplishment after completion.

For example, set up review tasks for each subject every day, and tick a box when you complete one. Try to be as specific and detailed as possible, how many pages of the book to read, when to complete a set of questions, etc.

It is also important to arrange the review subjects reasonably, and you can divide the daily review into segments, such as reviewing management or pricing in the morning, reviewing measurement in the afternoon, and watching case ...... in the evening

However, don't review the same course or the same book for a long time. Not only is it easy to get tired, but it's also ineffective. Change classes every few hours and change your mind. It is also not suitable to be buried in learning every day, and there must be a certain amount of relaxation and adjustment time.

Relax to a certain extent, and relax yourself appropriately, which will make learning more efficient! As long as the method is correct, there will always be a day when the bottleneck will be broken and the willows will be bright. I hope everyone can win at the starting line, come on!

From now on, read through the textbook three times and sketch out the places you don't know! Then if the time is very tight, you can't spare time! You can sign up for a training class!

This can save a lot of time, and the teacher will generally talk about the key points in the training class, so can save a lot of time! Then do a lot of past questions, you can see the test points of the past years from the past questions! That is, to respond to all changes with the same.