What are the characteristics of veneer decorative panels, the concept of veneer wall decoration

Veneer decorative board is veneer decorative board manufacturers on the surface of the special treatment to protect the plate, long service life, no discoloration, easy to clean, high cost of mechanical equipment and process technology requirements, is a more ideal plate maintenance process, let's take a look at its characteristics.

1. The mirror highlight effect is obvious, and the color is rich and attractive.

2. The veneer decorative board itself does not contain volatile substances such as benzene, and is cured by ultraviolet light to form a dense curing film and reduce the release of substrate gas.

3. Compared with the traditional board, the veneer decorative board has better physical and chemical properties, which ensures that the board does not lose color for a long time, and solves the phenomenon of color difference.

There are many names for ecological boards in the industry, and the common names are paint-free boards and melamine boards. The original name was called melamine board, but due to the pollution of China's dairy products, it was later forced to change its name, and the industry is collectively called paint-free board, and there are also called ecological boards, but the ecological board is too general, because many boards that achieve ecological environmental protection can also be called ecological boards, which is easy to confuse. Ecological board is divided into two concepts: narrow and broad.

1.In a broad sense, the ecological board is equivalent to melamine veneer, and its full name is melamine impregnated adhesive film paper veneer wood-based board, which is a decorative board made by soaking paper with different colors or textures into the resin adhesive of the ecological board, and then drying to a certain degree of curing, and laying it on the surface of particleboard, moisture-proof board, medium-density fiberboard, plywood, blockboard or other hard fiberboard, and is hot-pressed into a decorative board. 2.

In a narrow sense, the eco-board only refers to the melamine veneer with multi-layer solid wood (plywood) and blockboard (such as Malacca, fir, paulownia, poplar, etc.) used in the middle. It is mainly used in furniture, cabinets, wardrobes, bathroom cabinets and other fields.

Summary. pro, pasted and hung decorative finishes; This refers to the method of decorative construction with a larger size of natural or artificial stone blocks. Due to the relatively large volume and mass of the material, in order to ensure safety, structural connection measures such as hook hanging are adopted to strengthen the connection between the facing block and the base layer, which is different from the direct inlay veneer.

Common mounting finishing materials are natural stone (such as granite, marble, etc.) and prefabricated blocks (such as prefabricated terrazzo slabs, artificial stone, etc.). Hanging finishes have the characteristics of waterproof, corrosion-resistant, easy to clean, not easy to pollute, good durability, high strength, and durability. In addition, there are many varieties of plate materials, and the colors are rich, the surface is smooth and gorgeous, the decorative effect is good, and there is a high ornamental effect, giving people a noble and elegant or solemn feeling.

The concept of veneer wall decoration refers to the use of natural or artificial materials, such as natural cracked stone, artificial stone, glazed bricks, ceramic mosaic tiles, etc., using the paste process or hooking construction to the wall column surface to achieve the effect of decoration and protection of the wall. It has the advantages of good decorative effect, stable vertical color of liquid source, easy to clean, waterproof and corrosion-resistant, sturdy and durable.

pro, pasted and hung decorative finishes; This refers to the method of decorating the construction with a larger size of natural or artificial stone blocks. Due to the relatively large volume and mass of the material, in order to ensure safety, structural connection measures such as hooking cherry blossoms are not slippery to strengthen the connection between the facing block and the base layer, which is different from the direct inlay veneer. Common mounting finishing materials are natural stone (such as granite, marble, etc.) and prefabricated blocks (such as prefabricated terrazzo slabs, artificial stone, etc.).

Hanging finishes have the characteristics of waterproof, corrosion-resistant, easy to clean, not easy to pollute, good durability, high strength, and durability. In addition, there are many varieties of plate materials, and the colors are rich, the surface is smooth and gorgeous, the decorative effect is good, and there is a high ornamental effect, giving people a noble and elegant or solemn feeling.

Hello dear! We will be glad to answer your questions. What are the common veneer materials?

Answer: Hello dear dear, metal metal as a finish, when you don't understand, you may think that it is cold stainless steel, but in fact, metal can also play a lot of tricks and increase the effect of space. The metal is treated to express a wide variety of colors and textures, and it is still very decorative.

You can choose the right metal to do what you want to adjust the reflection and reflection of light and image; Or a variety of different forms and shapes of metal materials to make the space more unique. 02 Paper Cloth Since ancient times, paper has been often used in interior decoration, whether it is hard decoration or furniture, it can be paper. Now the paper materials used in the interior generally include rice paper, new material Dupont paper, etc., if the top surface of the indoor wall is pasted with rice paper, the slightly rough texture and soft texture of rice paper can soften the space well.

Like the new material Dupont paper, it looks like it has the characteristics of paper, but it is not really paper. The texture is unique, breathable, lightweight, and not torn, and the effect is very unique when used in space. The cloth used in interior decoration, in addition to the wall cloth, is generally silk cloth, a material with traditional Chinese meaning, and is also used in many Chinese style and bad spaces.

There can also be a variety of patterns on the silk cloth, coupled with the material characteristics of faint light transmission, it is a very good partition material. 03 Glass glass is already common in indoor use, and various glass partition partitions and partition walls emerge in an endless stream. And now there are more forms of glass, such as Changhong glass, water pattern glass, dazzling glass, glass bricks, etc., and the effects are more diverse.

Of course, glass can also be used as a finish on some furniture to bring a completely different effect. There is also a material that is slightly similar to glass, and that is mirror. The mirror also has the effect of magnifying the space, and the unique reflection effect makes the space more visually rich, and can change the whole space when used well.

04 cement is also a very good choice to make cement effect in the space, whether it is a simple cement texture of art paint, or a variety of concave and convex shape effect of cement bricks, can bring a different effect to the space. There is also the kind of cement hollow tiles, which not only have the roughness of cement material, but also can transmit light and scenery, and can also become a visual focus in the space. Of course, there are many other materials that can be used as finishes.

Here is the "Ultimate Guide to Finishing Design", which contains a detailed analysis of 13 kinds of finishing materials, learning the properties, functions and finishing effects of various aspects of finishing materials, so that your space design is more exciting. Thank you for your patience. The above is all my reply, if you are satisfied with my service, please give a thumbs up, and I wish you all the best!

Peace and joy!

In order to further enhance the quality of the furniture we make and ensure the superiority of the quality of the house we decorate, we often further upgrade and transform it in some aspects, no, smart modern people use veneer on this basis to achieve their protection and complete the role of promotion, you must want to ask, what is the veneer, what are the characteristics of the veneer, and use it to decorate the surface of our buildings and furniture, let's go and see it.

Introduction to veneers.

Veneer is also the decorative veneer veneer plywood we usually call in our daily life, it is a kind of use of technology wood planing or the use of natural wood materials to produce, when we make it, we often use a certain amount of glue on the surface of these raw materials to mix it, and then put these mixed raw materials into special manufacturing equipment, through high temperature hot pressing finally formed with good decorative properties of the board orange species.

The material and characteristics of the veneer.

Veneers are usually made from a variety of different raw materials, as shown below

1. Beech veneer. The so-called beech veneer is a veneer made of beech wood, which is divided into white beech wood and.

Red beech wood, beech wood material is of excellent quality, itself has a straight and fine texture, uniform point distribution, has a good decorative effect, their wooden materials are very hard and tough, with wear-resistant and corrosion-resistant effect, when we make them, they are often cut into thin slices, and the veneer produced has good performance characteristics.

2. Ash veneer. This kind of veneer is a type of board made of ash as the main raw material, ash has a superior texture, its own structure is a very delicate kind, and their texture is also very straight and coarse, the strength is relatively good, therefore, the veneer made by using it has a good hardness, and is very easy to paint, is a good decorative material.

3. Cherry wood veneer. The veneer made of cherry wood as the main raw material usually has a good mechanical effect and processing effect, and the cherry wood itself has good bending performance, and India is relatively low, therefore, the veneer produced has a good nail holding force, glue strength, the processing effect is very significant, has a good dimensional stability after drying, and is often used by people to the production of floors, cabinets, wainscoting and so on.

Summary: In addition to the above materials, the veneer is also made of oak, teak, walnut, maple and other materials.

Curtain wall design, ceiling design, Rongsheng integrated ceiling, sauna board ceiling, Boeing soft film, PVC ceiling, light steel keel ceiling, cold-rolled plate.

Rongsheng integrated ceiling integrated ceiling ranking Moganshan board composite board ceiling ceiling gypsum board European ceiling drainage board.

1.Planed wood veneer.

Planed veneer is made of wood from precious tree species with a radial planing process, and the thickness of the board is thin. The materials are different, the patterns are different, and there are many ways to paste on the wood-based panel, which is characterized by being real and natural, no cracking, no deformation, and saving wood, which is conducive to environmental protection, and is a kind of decorative veneer with the highest market share at home and abroad today. However, this kind of veneer is expensive because it is made of precious tree species as raw materials, so it is used to process scraps from fragmented wood, coloring, gluing, and planing into thin boards, which are used to veneer wood-based panels, and its effect is even better than planed wood veneer.

2.Plastic veneer.

The common is a softer PVC film, which is printed into a variety of color patterns and wood grain for veneer, with bright colors, beautiful patterns and cheap patterns. To avoid polluting the environment with plasticizers in PVC, polyethylene or polypropylene film has been used instead. Its use is mainly in larger area uses, such as door panels, exhibition hall wall decoration, etc.

3.Paper-veneer.

There are many types of this kind of paper veneer, mainly pre-coated decorative paper, low-pressure tissue paper short-cycle veneer, high-pressure amino resin veneer, etc. It is mainly characterized by bright color, strong decorative function, and wide market application.

4.Foil veneer.

This is a new development in recent years, mainly used in the need for metal surface decoration, can reduce the amount of metal, such as aluminum foil panel used as elevator hall wall, copper foil panel used as door decoration. Its advantage is that it has a good decorative effect.

？Next, Fengchen Wood will analyze it with you. With the rapid development of industry, China's construction area is gradually expanding, with the development of the decoration industry, in the home decoration decorative veneer is indispensable to mention, decorative veneer is the first choice of convenient and fast practical decoration supplies.

Melamine veneer makes the furniture look strong, the paper itself printed with color or imitation wood grain is fragile, the adhesive film paper formed after soaking in the transparent resin of the melamine board is much harder, the adhesive film paper and the substrate are hot-pressed into one and has good performance, the furniture made with it does not have to be painted, and the surface naturally forms a protective film, which is wear-resistant, scratch-resistant, acid-alkali resistant, scald-resistant, and pollution-resistant. When choosing this kind of panel furniture, in addition to the color and texture satisfaction, you can also distinguish the appearance quality from several aspects. Whether there are stains, scratches, indentations, pores, whether the color and gloss are uniform, whether there is bubbling, whether there is local paper tearing or defection.

The advantages of melamine veneer are: flat surface, not easy to deform because the double-sided expansion coefficient of the plate is the same, bright color, wear-resistant, corrosion-resistant, and economical. The domestically produced melamine finish door panels are represented by dew river panels, and all indicators have also reached international standards.

The disadvantages of melamine veneer: low grade, easy edge banding, obvious glue traces, less color, no gong flowers, only straight edge banding.

The performance of melamine veneer: melamine veneer can be arbitrarily imitated with various patterns, bright color, used as a veneer for various wood-based panels and wood, with high hardness, wear resistance and good heat resistance. Melamine veneer has good chemical resistance and can resist the abrasion of general acids, alkalis, greases and alcohol.

The surface of the melamine veneer is smooth and clean, and it is easy to maintain and clean. Because melamine veneer has excellent properties that natural wood cannot have, it is often used in interior buildings and various furniture and cabinet decoration. The surface of the melamine veneer is smooth and clean, and it is easy to maintain and clean.