What should I do if the water purifier shows that the water is full but the water is full?

Water purifiers. Workaround for showing water full but not making water:

1.Make sure that the purified water and pressure drum outlet are properly connected to the tubing, and if not, connect the tubing.

2.Check that the pressure bucket switch is not turned on, and if it is not, turn the switch on.

3.It is possible that the high-voltage switch or rotameter is broken, and the switch and meter can be removed for repair or replacement.

4.It may be that the wire or circuit board is broken, inspect the wire or circuit board, repair or replace the wire or circuit board.

According to the composition of the filter element, the water purifier is divided into RO reverse osmosis water purifier, ultrafiltration membrane water purifier, energy water purifier and ceramic water purifier. The RO reverse osmosis water purifier is equipped with 5-stage filtration as standard, that is, PP cotton.

Granular carbon, compressed carbon, RO reverse osmosis membrane.

Post-activated carbon.

Level 5, ultrafiltration water purifier is based on ultrafiltration membrane, supplemented by other filter elements such as activated carbon, ultrafiltration water purifier is divided into vertical and horizontal according to the installation method, vertical ultrafiltration water purifier is composed of PP cotton, granular activated carbon, compressed activated carbon, external pressure ultrafiltration membrane, T33. The horizontal ultrafiltration water purifier is composed of a stainless steel shell, an internal pressure ultrafiltration membrane, and a KDF. Water purifiers are mainly divided into two categories: household water purifiers and commercial water purifiers according to different places of use.

The water purifier shows that the water is full, but there is no water, which is generally a mistake in the display, which may be a problem with the line, and you can ask a professional master to overhaul it.

In this case, there should be a problem with the system of the water purifier, generally speaking, it is a problem with the internal chip program, which may need to find someone to repair it and restore the chip program to normal, so you can only send it to after-sales.

Make sure that the purified water and the outlet of the pressure drum are properly connected to the pipes.

2. If it is connected, the pressure barrel switch is not opened.

3. The high-voltage switch or rotameter is broken.

4. If there is no problem with the first 3 points, it may be that the wire or circuit board is broken.

In this case, it is very likely that there is a problem with the switch, that is to say, there is a problem with the water level sensor, and it should be good to replace the sensor.

That means that either the inside is blocked, or it is thrown bad, this thing also needs to be maintained, this thing according to what I said to make the security guard lie, is a sponge inside.

When the water purifier shows that the water is full, he will stop making water, and he will only start making water after the liquid level drops.

If you see if there is a problem with the equipment, you can contact it, consult after sales, and whether you can come to repair it.

In this case, it is possible that the signal line is damaged.

Or the sensor is damaged.

You need to find a manufacturer for repair.

Hello, may have sensed a problem. Call the after-sales customer service, and they will arrange personnel to come to the door for maintenance.

This 1 should have a certain content, not the fullest.

The water purifier always shows the possible reasons for the lack of water for flushing:

The low-voltage switch is broken and needs to be replaced.

The water inlet solenoid valve is out of order or the water inlet is not smooth.

The cartridge is at the end of its life.

Water purifier failure and solution:

High voltage switching. (1) The high-voltage switch is broken, and the machine does not stop when the water is full.

2) The machine repeats the jump.

3) The high-voltage switch is broken, short-circuited, the machine can work normally, replace the high-voltage switch.

Problems caused by broken water inlet solenoid valves.

1) If the water inlet solenoid valve is broken, the water will not be out when the power is on, the machine will be shut down, the waste water flow will not stop, and the noise will be loud.

2) If the water purifier is used for a long time, the accessories will be replaced if they are broken, and it may be a problem with the solenoid valve when the water purifier is not working.

3) The low-voltage switch is broken, the machine has problems, and the machine cannot make water normally.

Pressure barrels. (1) The pressure barrel is broken and cannot release pure water.

2) The pressure barrel is leaking, put a bucket of water, put the pressure bucket in the water, and see if the pressure bucket is bubbling, if it is bubbling, it is broken, and it is normal to show that it does not bubble.

3) Flush the pressure barrel and flush 7kg-8kg.

The machine does not stop when the water is full.

1) The high-voltage switch is broken, detection: the computer box shows a green light, the water is full and does not stop, and the computer box is broken.

2) After the machine is flushed, it starts to be in the state of water production, the water pump does not work, and the high-pressure switch is broken.

3) Pull out a wire of the high-voltage switch, if the machine works in the case of short circuit, the high-voltage switch fails, if the machine does not work, the computer box is broken.

The pressure bucket is full of water, or the water is very small.

1) The inner liner of the pressure barrel is ruptured and replaced.

2) If the air pressure of the pressure barrel is too low, unscrew the valve cover of the small foot of the pressure barrel and add air pressure.

Hope it helps.

The water purifier keeps showing what is going on with the water being full, hello dear <>

The water purifier shows that the water is full, which means that the water in the water purification bucket is full, in this case, the water purifier will stop working. Generally speaking, there are two possibilities for the water purifier, that is, the pressure barrel valve of the water purifier is closed, because there is no water storage space, and the water purifier will show that the water is full after working for a short time, which may be caused by the damage of the high-pressure switch in the water purifier, and there are very few cases that are caused by damage to the motherboard. If you have any other questions, you can contact Oh, I hope it will be helpful to you, thank you.

Generally speaking, there are two possibilities for the water purifier, one may be that the pressure barrel valve of the water purifier is closed, because there is no water storage space, the water purifier will show that the water is full after working for a short time, and the other possibility is caused by the damage of the high-voltage switch in the water purifier, and there are very few cases that are caused by damage to the motherboard.

Summary. The water purifier keeps showing that the water is full, what is going on, the water purifier shows that the water is full, indicating that the water in the water purification bucket is full, in this case, the water purifier will stop working. Generally speaking, there are two possibilities for the water purifier, that is, the pressure barrel valve of the water purifier is closed, because there is no water storage space, and the water purifier will show that the water is full after working for a short time, which may be caused by the damage of the high-pressure switch in the water purifier, and there are very few cases that are caused by damage to the motherboard.

If you have any other questions, you can contact Oh, I hope it will be helpful to you, thank you.

I'm still a little confused, can you be more detailed?

The water purifier keeps showing that the water is full, what is going on, the water purifier shows that the water is full, indicating that the water in the water purification bucket is full, in this case, the water purifier will stop working. Generally speaking, there are two possibilities for the water purifier, that is, the pressure barrel valve of the water purifier is closed, because there is no water storage space, and the water purifier will show that the water is full after working for a short time, which may be caused by the damage of the high-pressure switch in the water purifier, and there are very few cases that are caused by damage to the motherboard. If you have any other questions, you can contact Oh, I hope it will be helpful to you, thank you.

Summary. The water purifier shows that the water is full and does not make water. First of all, see if there is water in the pressure barrel, whether the water can be released, how to run out of water or not make water, that is the problem of high-voltage switch, the use of elimination.

Glue the two wires of the high-voltage switch with adhesive tape to short-circuit the method, and see if the water machine can make water at this time, and it is good to change a high-voltage switch. Remember that there is no high-pressure switch, although the machine can make water, do not use it, it will make the pressure barrel**. The high-pressure switch function detects whether the pressure bucket water is full, and stops working before the machine is full.

What should I do if the water purifier shows that the water is full but there is no water? Display panel Water Flush Water Full These three states are circulating all the time

Hello dear. The water purifier shows that the water is full and does not make water. First of all, see if there is water in the pressure barrel, whether the water can be released, how to run out of water or not make water, that is the problem of high-voltage switch, the use of elimination.

Glue the two wires of the high-voltage switch with adhesive tape to short-circuit the method, and see if the water machine can make water at this time, and it is good to change a high-voltage switch. Remember that there is no high-pressure switch, although the machine can make water, do not use it, it will make the pressure barrel**. The high-pressure switch function detects whether the pressure bucket water is full, and stops working before the machine is full.

Dear, hello, I am glad to answer for you that the water purifier is full of water and does not stop without stopping the fault, which is more common. At this time, two pressure gauges are needed to detect the pressure, one is to detect the output pressure after the pump, and this situation is handled with reference to the situation of not making water. If the water pump is not turned, it will naturally not be shut down.

There is also a pressure gauge that needs to be connected after the high-pressure switch, before the pressure barrel, to detect that when the pressure barrel is full (closed), the pressure is displayed when the machine is stopped. The normal pressure is that when it is greater than 4kg cm2, it is difficult for the machine to stop. Because the reaction force of the air pressure inside the pressure barrel is exceeded.

At this time, please replace the high-voltage switch, or use 2 inner hexagonal wrenches to rotate the adjusting screws of the high-voltage switch counterclockwise, Fengmuhong, has reached the pressure range required for normal shutdown, and the machine is frequently started after shutdown. on these three accessories. Problems with the first two accessories are the most common.

Observations can be changed one by one. The pressure barrel is relieved, the water cannot be released, and there is no pressure to make the high-pressure switch jump, and it will not stop. When the above tricks are exhausted, you can consider observing whether the computer version of the household water purifier is flooded.

It is possible that the machine leaked water and flowed into the computer version, causing a short circuit, causing the command system to be disordered. Resulting in no downtime.

Summary. Hello, there are generally two possibilities for this situation in the water purifier, one may be that the pressure barrel valve of the water purifier is closed, because there is no water storage space, the water purifier will show that the water is full after working for a short time, and the other possibility is caused by the damage of the high-pressure switch in the water purifier, and there are very few cases that are caused by damage to the motherboard.

The water purifier does not make water after a few seconds of turning on and cleaning, and the water is full.

Hello, there are generally two possibilities for this situation in the water purifier, one may be that the pressure barrel valve of the water purifier is closed, because there is no water storage space, the water purifier will show that the water is full after working for a short time, and the other possibility is caused by the damage of the high-pressure switch in the water purifier, and there are very few cases that are caused by damage to the motherboard.

The water purifier of the all-in-one cooling and heating machine is turned on and stopped after a few seconds of flushing, showing that the water is full, what is the reason.

Hello, you turn off the power and plug it back in.

The water purifier without a pressure barrel is a hot and cold water purifier.

How many times have you repeated the power disconnection?

Dear, check the high-voltage switch ......

Where is the high-voltage switch and what does it look like?

Dear, you need to disassemble the water purifier, it is recommended to go to the repair shop for repair......