Samsung SCX 4x21 How to set up faxing

In standby mode, press the menu 5 times, press Zuojian once to press Confirm, press "Left" or "Right" to select the fax mode, then press Confirm, and then press the Stop button to return to the standby state.

If you want to receive faxes automatically, the fax mode should be selected Fax Mode

**Mode: Accept faxes manually.

Fax mode: The machine automatically accepts faxes.

Follow these steps:

1. Set up the XP system of the computer host.

1.Install the driver for your Samsung printer on the host side.

2.Click the Start menu item in the lower left corner of your computer and find Printers & Faxes.

3.Right-click the printer icon and select the Share menu item.

4.Select the Share tab, then tap the Share this printer option, and then tap OK.

2. Set up the computer client win7 system.

1.Install the printer driver for Win7.

1.Select Start in the lower-left corner of the host computer.

2.Select [Run] and enter [cmd] in it.

3.After the input is finished, the computer will pop up a DOS window, and enter "ipconfig" where the cursor flashes

command, and then press the [Enter] key to see the IP address of the host

Address. 4.After entering the IP address of the host, enter the host sharing interface, right-click the shared Samsung printer icon, and select the [Connect] menu item.

The operating system will automatically connect with the host, and then the installation driver interface will appear, select [Install Driver].

6.After installing the driver, click Start in the lower left corner of the computer and find Devices and Printers. In the Devices & Printers window, confirm that the shared printer icon appears.

Summary. Samsung SCX-4521F set Chinese menu method.

How to set the scx-4521f menu to Chinese?

1, Press Menu until the screen shows "Machine Setup" 2, press Machine Panel. on the left and right arrow buttons, the bottom of the straight screen shows "language."", press the Confirm button to enter.

3. Press the machine panel. Select on the left and right arrows.

chinaese"。Then press the confirm button to save the settings.

4. Finally, press the 'Stop Clear' button to return to standby mode.

Samsung multi-fax all-in-one SCX-4521F How to change to Chinese interface.

Hello, dear. I can't find the meaning in Chinese.

Samsung SCX-4521F Settings Chinese Menu MethodHow to set the SCX-4521F menu to Chinese? 1, Press Menu until the screen shows "Machine Setup" 2, press Machine Panel. on the left and right arrow buttons, the bottom of the straight screen shows "language."", press the Confirm button to enter.

3. Press the machine panel. on the left and right arrows, select "chinaese.""。Then press the confirm button to save the settings.

4. Finally, press the 'Stop Clear' button to return to standby mode.

Control panel, no clause 3 appears.

Only English appeared.

Wait for me to see.

When the third article is chosen, it appears in English, not Chinese.

Have you installed a patch?

You have to find a Chinese patch.。 Otherwise, it won't work... It's the same in English.。。 It makes no difference.

Call Samsung's ** 800-810-5858 has a manual service and he will tell you how to do 800** is free.

Ask about custom messages].

Here's how to operate the fax machine of the Samsung SCX-4521F:

1. Use a data cable to connect the printer to the computer, the printer is turned on, and then insert the software CD into the CD-ROM drive.

2. After the disc is inserted, the computer will pop up the installation interface, and then select [Install Now]. If it doesn't pop up, you can go to [My Computer] or [Computer], find the mobile drive letter, double-click to move the drive letter to enter, and select the program in [You can also open it].

3. Follow the instructions of the installation wizard and click [Next].

4. After completing the above operations, if you want to test whether the machine can print, you can choose to print the test page, if not, directly select [Finish].

A fax machine is a communication device that uses scanning and photoelectric conversion technology to convert documents, charts, and other static images into electrical signals, transmit them to the receiving end, and copy them in the form of records.

The fax machine decomposes the original to be sent into many tiny units (called pixels) through an optical scanning system in a specified order, and then converts the brightness information of these tiny cells into electrical signals by the photoelectric conversion device in sequence, and sends them to the channel after amplification, encoding or modulation.

The receiver amplifies, decodes, or demodulates the received signal and copies a copy of the original in recorded form at the same scanning speed and sequence as the sender. Fax machines can be divided into black and white fax machines according to their transmission colors, and narrowband fax machines (occupying one phone band) and broadband fax machines (occupying 12 channels, 60 channels or wider frequency bands) according to the frequency bands occupied.

First of all, enter the **line and connect the **line jack (line) behind the printer, and then connect a connection in the other jack (ext), put the paper to be sent face up on it, dial **, press the confirmation key after receiving the signal, and then press the 1 button.

The Samsung SCX-4521F printer divides fax reception into automatic and manual reception.

Manual Receiving Method:

1. In the aroused standby state, press the : menu key, and then press data: 5 to jump to: fax settings, interface.

2. Press the left arrow, then select: Receive mode, and click the "Confirm" button.

3. Toggle and select: ** (manual mode) by turning the left and right arrows, and then click the "Confirm" button.

4. Finally, click Stop Clear to return to the ready state.

Manual fax, after answering**, press "9*" on ** to transfer to the fax, hang up**.

Automatic Receiving Method:

Press the scroll button (right arrow) until it says: Receive Mode. Then select Set to receive automatically.

Summary. Follow these steps:

1.Press the Fax button on the control panel.

2.Press the Menu key on the Control Panel.

3.Press the left and right arrows on the control panel to select Fax Settings, and then press the OK button.

4.Press the left and right arrows on the control panel to select Receive, and then press the OK button.

5.When the screen displays [Receive Mode], press the [OK] button.

6.Select the desired mode (automatic mode for faxing, manual mode for **), and then press [OK].

Samsung SCX-4521HS Fax Copier Printer How to Change Fax Mode.

Dear I am working on the answer to this question, please be patient.

Follow the steps below with macro omission:1Press the Fax button on the control panel.

2.Press the Menu key on the Control Panel. 3.

Press the left and right arrows on the control panel to select Fax Settings, and then press the OK button. 4.Press the left and right arrows on the control panel to select Receive, and then press the OK button.

5.When the screen displays [Receive Mode], press the [OK] button. 6.

Select the desired mode (automatic mode for faxing, manual mode for **), and then press [OK].

Now I want to print but the fax mode is displayed, how to convert to print mode.

I don't have these buttons from you.

Find the label. Samsung SCX-4821HN

You wrote it wrong. So it's different.

Samsung printer SCX-4521F, how to use the copy function is as follows:

1. Turn on the power of the device, and then check whether there is paper in the paper tray of the device.

2. When everything is ready, open the cover.

3. Prepare the paper materials that need to be copied, and place the paper that needs to be copied on the glass surface of the Samsung SCX-4521F, and pay attention to the hole that needs to be copied with the side down.

4. After putting the paper, close the machine cover, and set the size of the copy paper on the panel. However, generally speaking, the default is to rent A4 paper size, and you can choose image scaling. and set the number of copies.

5. Directly on the panel of the Samsung SCX-4521F all-in-one computer, press the start button to complete the copying of the data. When you're done copying, remember to pick up your original.