What should I do if the Redmi 1S keeps getting stuck and rebooting?

Redmi 1S-Unicom Telecom Edition, 4G Edition Redmi Note and Xiaomi mobile phone series use Qualcomm's processor, (Mi 3 Mobile Edition uses Nvidia processor, but the Sanqing method is the same.) The method of three clearances is as follows:

Back up first and then shut down Press and hold the volume button and the power button at the same time (or system update, click the menu key to reboot to recovery) After entering recovery, use the volume button to select, power button to confirm, select Clear Data, Clear Cache'Clear all data, this is the three clear.

PS: Remember to back up in advance. It's a good idea to save the backup package to your computer so you can restore it back in the future.

Since the Redmi MTK series (except for the Redmi 1S-Unicom Telecom Edition, the 4G version of the Redmi Note uses Qualcomm CPU), the rest are all CPUs using MTK, so the method of entering Recovery mode is different from other Xiaomi models!

Here, we will teach you to enter the Redmi series - Recovery, Fastboot mode, card swiping, and double clearing!

It should be noted that Redmi Recovery Mode: Volume down key --- is to select Volume Plus key ---is to confirm).

Redmi Series (MTK) to enter the recovery method:

1.In the shutdown state, press and hold the volume down + power button at the same time, release the button when the screen lights up, and select to enter recovery

When the green robot diagram appears, press the "Power Button" once to enter the menu).

Or click on System Update, click on the Menu button - select Restart to recovery, click OK, the phone will reboot into recovery mode, and see a green Android robot lying on the ground (the same as a copycat. My buddy and I were stunned. Finally press the power button to enter.

2.Press "Volume Down" to select Recovery and then "Volume Up" to confirm, select [Wipe Data Factory Reset] and select Yes - Press "Volume Up" to confirm and wait for the cleanup to complete.

3.Use "Volume Down" to select [Wipe Cache Partition] yes - Press "Volume Up" to confirm.

If it is convenient for you, please open the link, which has ** introduction.

There are many things, and there are too many backends, so you delete them.

Summary. The reasons and methods for the Redmi phone to freeze when it is turned on are as follows:1

The inexplicable crash of the mobile phone may be due to the existence of some applications in the system that interfere with the normal operation of the system, especially some programs that have obtained root permissions, so it is recommended that the mobile phone do not use root privileges at will. 2.Another reason why the phone crashes may be that the battery has entered sleep, so it will not turn on and cannot be charged normally.

3.The incompatibility of the mobile phone software with the current system version will also cause the mobile phone to crash and freeze, and we can uninstall the incompatible software.

The reasons and methods for the Redmi phone to freeze when it is turned on are as follows:1The inexplicable crash of the mobile phone may be due to the existence of some applications in the system that interfere with the normal operation of the system, especially some programs that have obtained root permissions, so it is recommended that the mobile phone do not use root privileges at will.

2.Another reason why the phone crashes may be that the battery has entered sleep, so it will not turn on and cannot be charged normally. 3.

The incompatibility of the mobile phone software with the current system version will also cause the mobile phone to crash and freeze, and we can uninstall the incompatible software.

Other methods are as follows: 1. Press and hold the power button for ten seconds to force a restart, and you can force it to turn on. In the state of shutdown,Use the combination key volume plus key plus power key,Press and hold for about 3 seconds,Xiaomi white logo will appear on the screen,Then restart option 2、Use the combination key volume subtraction key plus power button,Press and hold for about 5 seconds,After fastboot white rabbit appears on the screen,Long press the power button to restart the redmi phone how to force it to boot up3、If the notification bar is responsive, stop using the phone for a few minutes, Then the mobile phone will automatically solve the problem of the card machine 4, pull down the notification bar in the boot state without any response, just press and hold the power button for about 10 seconds, the phone will automatically restart, and what can help you, I hope to help you, I wish you a happy life

Redmi is synonymous with high-end and low-cost smartphones, so do you know how to restart when Redmi phone crashes? Here's a guide to tell you the answer.

01 When the Redmi phone crashes and cannot be restarted directly, we can only recover it by entering the safe mode of the phone, which is currently a relatively easy method.

02 We press and hold the power button and volume button of the Redmi phone at the same time, and generally after more than ten seconds, we can see an Android icon, and then we successfully enter the safe mode of the phone.

03 Next, we use the volume keys to move the cursor, select Clear All Cache and Clear All Data, respectively, and save the settings.

04 Finally, we just need to turn the Redmi back on and wait patiently for a few minutes to successfully enter the operating system of the Redmi phone.

Press and hold the power button until it is turned on.

The power button and the up and down volume buttons are pressed together for 10 seconds.

It will automatically restart.

fsatboot,It's a line brush mode.,Used to link the computer to flash the machine.。

This needs to be flashed, this is a problem with the mobile phone system, I can brush it well.

Connect to the computer first,Use software such as pea pods to see if you can connect to the phone,If you can connect to the phone,Find a desktop software to install it,Then shut down and restart the attempt,If not,**MIUI computer line brush software according to the prompts to flash,If the line brush can not be recognized,You can only swipe the card,The card swipe package is available in the Xiaomi forum。 Since it is a card swiping tutorial, be sure to rename the card swiping package to the root directory of the memory card of the mobile phone, and the operation is as follows: (Xiaomi mobile phones are basically universal).

Turn off your phone. Press and hold the volume + power button Rec interface appears on boot and let go The content that appears Please select according to the content of your respective mobile phone, press the power button to determine, I will mark the items that need to be operated with colors, and I will use Mi2 to demonstrate.

The following options appear:

Chinese Simplified Chinese Traditional.

english

Main menu. Restart your phone.

Clear data. will be installed on System 1.

Shutdown. PS: Mi 1 S Youth Edition will appear.

Update Partition] to clear data. Clear the cache.

Clear user data.

Erase all data.

Return to the main menu.

The above choices one by one, in no particular order, each time you enter one, you will be given the option to confirm or cancel, and select [Return to the Main Menu] after playing

Main menu. Restart your phone.

Clear data. will be installed on System 1.

Shutdown. PS: Mi 1 S Youth Edition will appear.

Update Partition] Mi-1 1S Youth Edition chooses to update partition.

Main menu. Restart your phone.

Clear data. will be installed on System 1.

Shutdown. Note that you have to put the card swipe bag into the phone to be recognized, and after selection, you will be prompted whether to upgrade, everyone chooses Yes and then waits.

The swiping process is generally completed within 1 minute to 2 minutes.

After brushing, please choose to shut down, and then start using your new system, note that the new system will be slightly slower when it enters the desktop for the first time, so you can wait patiently.

Hi! Sanqing re-wired the phone and swiped it. I didn't brush it well.

Flash it, the new system is a little better.

If it doesn't work, change your phone, and remember not to buy Xiaomi.

Remove the battery, and install it after a while, press and hold the volume + power button, select Restart to enter the system, and select the one that is not used recently.

Software bugs, it is recommended that you flash the system to change, you will not go to the mobile phone store, and it can be repaired for about 20 yuan