Is it complicated to renovate only the kitchen for water and electricity?

The procedure for remodeling the kitchen with water and electricity is relatively uncomplicated. First of all, it is necessary to find a professional hydropower retrofit company for consultation and evaluation. They'll send an engineer to visit the site to understand your needs and budget, and provide a solution.

The specific decoration of the house can be calculated here, just enter the area + city, calculate the decoration in 3 seconds, know the real ** in advance, and easily grasp the decoration company: [Click here, free decoration**].

After the plan is determined, the hydropower renovation company will draw up a detailed construction plan and negotiate the construction time with you. During the construction process, they will first dismantle the old equipment and pipes, then rearrange the water and electricity pipelines, and install new water and electricity equipment such as faucets, sockets, etc. Finally, they do the necessary testing and debugging to make sure everything is working properly.

As for the range, it depends on a number of factors, including the size of the kitchen, the complexity of the remodel, and the materials and equipment used. According to market research, generally speaking, the cost of water and electricity renovation for the kitchen is between 5,000-20,000 yuan. Of course, the specific ** also needs to be evaluated according to the actual situation.

Finally, I suggest that you pay attention to the following points when choosing a hydropower renovation company: First, choose a qualified and experienced company to ensure that they can provide professional services. Second, communicate well with the company to clarify your needs and budget so that they can develop the right plan.

Finally, it is important to read and understand the terms of the contract carefully before signing the contract to ensure that the rights and interests of both parties are protected.

In conclusion, the procedure for carrying out a water and electricity renovation of the kitchen is relatively simple, but it is still necessary to find a professional water and electricity renovation company to carry out the construction. According to the market price, the cost is roughly between 5,000-20,000 yuan. Choosing the right company and communicating with them can ensure that the renovation project runs smoothly.

Finally, it is recommended to recommend our "Tuba Rabbit", Tuba Rabbit has 110,000 decoration companies and first-class businessmen in his hands, and the direct sales of building materials are affordable. Tuba Rabbit is selected for decoration, and Tuba Rabbit can accompany the signing of the contract for free, "decorate first and then make payment", reducing the worries of the owners. For more decoration information, welcome to visit:

Click to enter, professional customer service free consultation good company].

Kunming - [Kunming Decoration Strategy Guide].

Suzhou - [Suzhou Decoration Strategy Guide].

Hefei - [Hefei Decoration Strategy Guide].

Fuzhou - [Fuzhou Decoration Strategy Guide].

Beijing - [Beijing Decoration Strategy Guide].

Dalian - [Dalian Decoration Strategy Book].

Hangzhou - [Hangzhou Decoration Strategy Guide].

Shanghai - [Shanghai Decoration Strategy Guide].

Tianjin——[Tianjin Decoration Strategy Guide].

It is not complicated, because it is less difficult to change the water and electricity of only one room without re-laying the wiring.

Of course, such a procedure is not complicated, just need to re-wiring the water and electricity in the kitchen, and it is much easier than renovating the whole house.

It's not particularly complicated, but it is necessary to design a water potential in advance, and to buy the corresponding materials, and then the construction can be done.

It's not complicated. Because we only carry out water and electricity renovation for one space, both the materials and the design are very simple.

It's very complicated. Because there are many problems involved in the process of remodeling, not only in the kitchen. Consider other routes as well.

Such a procedure is not particularly complicated, because only the kitchen needs to be renovated with water and electricity, and the operation is relatively simple.

Such a procedure must be more complicated, and if the kitchen is renovated for water and electricity, it must be particularly messy and needs to be handled by a professional person.

This is not a complicated procedure, but it is important to plan properly and find a professional to help you.

If your home is undergoing a water and electricity renovation, and you want to treat the kitchen and bathroom better, then you must find a professional designer to design. And we must pay attention to the overall layout, and at this time we must pay attention to the design of the circuit, so that it can appear more beautiful.

Nowadays, many people will fight to buy a house, but they feel that there are many problems that everyone needs to pay attention to, because many people actually have no other understanding of decoration is not empty, and they do not know very well, but these problems should attract everyone's attention, and they should pay attention to related issues in life. In this way, our house will become better, and the design of the house will become more reasonable. If you want to design the kitchen and bathroom reasonably, then you must find a professional designer, and at this time, you must not put the kitchen and bathroom together, otherwise we will smell some stinks when cooking.

And we must pay attention to the overall layout at this time, but the house we bought is basically the bathroom and kitchen together, so we must pay attention to buying some products to block. If you don't want to smell some of the smell, then it's best to install a door in the kitchen, and you should also install a door at the junction of the kitchen and bathroom, so that it may be a little more reassuring, and the layout is also more beautiful.

If you don't know how to do it, you can also ask a professional mess at this time, and think that the designer will provide us with some advice and help at this time. And everyone must buy the right products, in fact, I think the design of the bathroom and kitchen is very important, because we should use such products in our daily lives, so we should pay attention to hygiene.

Introduction: If you want to handle the kitchen and bathroom quite well in the hydropower transformation, you should not only find a professional designer to design, but also pay attention to the overall layout, especially the design of the circuit, in addition to the requirements of beauty, but also more practical. The bathroom should be waterproof, one is the water and the other is the water supply, which needs to be wrapped with sound-absorbing cotton.

Today, I will talk to you about how to deal with the kitchen and bathroom in the hydropower renovation if you want to deal with it relatively well?

There are many issues that you need to pay attention to when buying a house, especially those that are closely related to your daily life, which should be paid attention to. If you want to have a reasonably designed bathroom and kitchen in the design process, then you need to find a professional designer, and at this time, you must not connect the kitchen and bathroom together, otherwise there will be some odors when cooking. And now people use more electrical appliances in the bathroom, so we must pay attention to electricity safety.

The standard of the washbasin water pipe in the bathroom is 500 mm high from the ground, and the spacing between the pipes is 10 cm, so that the appearance will not be affected during the later installation. The most important thing in the bathroom is waterproof treatment, one is the drain, the other is the water supply, when the water is down, you should pay attention to the floor drain to prevent odor, and at the same time, the wash basin should also be done to prevent overflow.

When renovating the kitchen, be sure to replace the water pipe with a new copper or PP-R pipe, and pay attention to not leaving dead corners after construction, otherwise it will be difficult to solve problems such as water leakage. Be sure to find a professional person for wiring, and at the same time reserve the socket according to your own needs to prevent the socket from being insufficient when using kitchen appliances in the later stage.

It is necessary to pay attention to follow the principle of "walking to the top and not to the ground, and walking vertically but not horizontally" as much as possible.

The hydropower construction specification is "go to the top and not to the ground, and go vertical but not horizontal". Many owners can't accept this specification, because they are afraid that going to the top will affect the aesthetics. But for the safety of concealed works, it is better to use this method.

Because plowing may damage the waterproofing, and once a water leak occurs, it is difficult to find out where the water leak is by walking the ground. This is because the water flows to a low place, and the leaky place does not necessarily flow out of the water first, and only when the water leaks downstairs or "overflows the golden mountain" will the leakage be found, and the loss will be larger.

Home water and electricity renovation.

It is not an easy task, and the following three aspects should be paid attention to when carrying out home hydropower transformation: 1. Design the renovation plan in advance 2. Do a good job of supervision during construction 3. Pay attention to the quality of hydropower materials.

When carrying out the renovation of water and electricity at home, the renovation plan must be designed in advance, and the renovation must not be started blindly, otherwise the renovation work has begun, and I don't know what to do next, and the result is that until the final completion, there are still many things that I want to do, and if I don't design the plan in advance, I always need to add things in the middle of the construction, and the cost of hydropower renovation will often exceed the budget, and the construction period of the renovation will be extended. Before the transformation, the design of the renovation plan also includes the owner has a clear idea of the layout of water and electricity in his home, to determine where the electrical appliances at home are placed, the need to install a few more sockets and a series of problems, in the transformation do not have an idea today and a change of idea tomorrow, which will cause great inconvenience to the construction personnel.

In the home hydropower transformation, do not hand over everything to the construction personnel, in the whole transformation process, must do a good job of supervision, it is best to have someone to the construction site every day to check the construction situation, because the hydropower transformation involves safety issues, must be very careful, and the hydropower transformation is done best not to make changes, once there are any omissions and mistakes due to negligence in supervision, there is no chance of secondary modification.

When carrying out home hydropower transformation, we should pay attention to the purchase of first-class hydropower materials, and choose regular manufacturers when buying materials, there are many hydropower brands now, and it is best to shop around when buying materials.

The project of hydropower renovation at home is very complex, and there are many problems involved, so we should pay attention to the above three aspects when carrying out hydropower transformation.

1. For the precautions for kitchen water and electricity decoration, it is important to ensure accurate positioning. There are many electrical appliances used in the kitchen, such as induction cookers, electric baking pans and ovens, etc., which are indispensable, and for such needs, the socket of the electrical appliances needs to be installed at a position of about one meter two from the ground.

2. If it is a built-in oven, then the socket should be at least 30 cm away from the oven. If the oven temperature is too high, if it is too close, it can easily lead to accelerated aging. For a normal socket, its location usually needs to be thirty centimeters above the ground.

The refrigerator needs to install its socket between half a meter and one meter from the ground, because the position of the back of the refrigerator is exactly the space to release heat during use, so care needs to be taken to avoid installing it in this position.

3. The socket of the range hood can be installed on the upper right side of the body, so as to avoid blocking the flue of the range hood, and the height is usually more than two meters from the ground.

4. The precautions for hydropower decoration are not only these, but also the details that cannot be ignored in the hydropower decoration. Therefore, we must pay attention to the relevant measurement and positioning to ensure the safety and scientificity of circuit transformation. Rational arrangement and transformation is the basis for ensuring home life.

Be safe, and what you love.

Personal experience Sockets should be installed in different locations at different heights, otherwise it is very inconvenient to use the water pipe of the sink must be higher It is best to be able to move, otherwise it will be very obstructive when washing large items.

Pay attention to the route, the location, and so on.

Kitchen water and electricity renovationWhen you first consider what electrical equipment you need in the kitchen, such as: ovens, microwave ovens, kitchen treasures, sterilizers, and even refrigerators, rice cookers, etc., on this basis, determine the placement and transfer of the above items, and communicate with professional hydropower designers to get a hydropower transformation plan.

In fact, this waterway suppression is just to seek peace of mind, if the problem is detected, it can only distinguish the leakage of the hot and cold water pipes, which part is difficult to find accurately, so there is no problem is the best, if there is a problem, there is a high probability that the cold water pipe or hot water pipe can only be replaced. Not only that, but now the material conditions are becoming more and more abundant, even the electrical appliances used in our bathrooms are very different from those in the early years, for example, heaters, bath bombs, hair dryers, electric water heaters, exhaust fans, etc., these household appliances not only bring to our lives.

The standard for water pipes in the dun cloth pool is that the water pipes are required to be 750 mm above the ground. The standard of the water pipe of the wash basin is that the height of the water pipe from the ground is 500 mm, and the distance between the pipes is 10 cm, so that when it is installed in the later stage, if it is a column basin, it can be completely covered behind the column basin without affecting the appearance. When installing water and electricity in the home improvement and installation standard, we must pay attention to the depth of the wall slot, and the general wire depth is about 2 times, so that if the problem is encountered in the later stage, it can be effectively and quickly solved, and if it is in the corner of the wall, it should be bent with a professional pipe bender, so as to effectively ensure its quality and beauty <>

There are many standards for hydropower transformation, and there are many places that need to be paid attention to, bathroom water is a waterproof treatment, a sewer is a water supply, the sewer pays attention to the floor drain to do anti-odor on the line, the wash basin sewer is on the line, the water supply standard shower meter high reserved inner wire elbow protrudes no more than 2 cm, the diameter of 15 cm can be but it is recommended that you change the living room and bedroom simply, some unreasonable to move the position, the living room is best to do a double control, and the bedroom, also do the double control, This is relatively convenient to use in the later stage.

。Because the original water and electricity location of the house can meet the basic needs of our life, the local simple transformation: one is to move the water and electricity use location, and the other is to add the water and electricity use location. For example, the position of the socket has been moved, the cold water nozzle has been increased and the position has been moved, and the arrangement of hot water pipes has been added.