The jade bracelet accidentally scratched two small silver marks, what should I do?!

In general, you can try soaking in water and scrubbing.

If you can't wash it, you can only re-polish it.

However, if it is not very serious, it is recommended to leave it alone.

If you wear it close to your body for a long time, it will fade and disappear after a long time.

Yes. Good luck!

Otherwise, go to a professional polisher to help you throw it.

The jade bracelet was accidentally scratched with two small silver marks, and there are several ways to try to repair it:

1.If the scratches on the jade bracelet are not obvious and small, you can apply some paraffin wax on it, dry it with fire, and then wear it for a long time.

2.If there are cracks inside and outside the same part of the jade bracelet, or there are through-type cracks, they can be repaired and strengthened by glue wax, and then decorated with gold or gold, which can ensure the overall integrity of the jade bracelet and make the jade bracelet look more beautiful.

3.If the scratches on the surface of the jade bracelet are relatively slight, you can try to rub it lightly with toothpaste, and use the friction particles in the toothpaste to polish the bracelet, which can generally eliminate the scratches.

4.If you have tried the above methods, but the effect is not good, it is recommended to send the jade bracelet to a professional store for polishing and repair.

In addition, in order to avoid scratches on the jade bracelet, it is necessary to avoid contact with hard objects when wearing it, and do not wear it with other jewelry, so as not to collide with each other and cause wear. Regularly clean and maintain the jade bracelet to keep it clean and bright.

1. When there are scratches on the jade bracelet, if the scratches are not obvious and very small, you can apply some paraffin wax on it, dry it with fire, and then wear it for a long time. Or use the way of gold painting to decorate, in order to increase the beauty of the jade bracelet, if the scratches are more serious, you can send the bracelet to the store for polishing.

2. When there are scratches on the jade bracelet, if the scratches on it are not very serious and it does not look obvious, at this time, you can evenly apply some paraffin wax on it, and then put the bracelet next to the stove to bake, and wait for the wax inside to melt, wipe it with a dry towel several times to fill the cracks inside.

3. If there are many scratches on the jade bracelet, you can use the way of inlay gold painting to decorate, and then design the scratches into a vivid pattern, which can better cover the scratches, and to a certain extent, it can also enhance the artistic value of the jade bracelet, but it requires a certain cost.

4. If the scratches on the top are too obvious, or the cracks are more serious, at this time, send them to a professional store for re-polishing and polishing, so that they can restore their original luster, and at the same time, they should also pay attention to anti-fall and try to avoid contact with hard objects to avoid damage.

If there are slight scratches on the jadeite jewelry, you can put some wax chips on the jadeite jewelry, and then roast it with fire, and wipe it with a clean towel immediately after the wax chips melt. However, if the scratches are too obvious and the marks are deep and larger, it is necessary to ask a professional jadeite maker to re-polish and polish the jadeite jewelry.

Aesthetic restoration.

It is a kind of inlay treatment method for the pure beautification and inlay treatment of the cracks that are basically not threatening the firmness of the jade bracelet, and to cover up or modify the fine cracks on the surface of the jade bracelet.

Method: The 24k filigree inlay is used for repair, which gently covers the flaws on the jade. Before painting gold, use a jade carving tool to outline a groove pattern with a certain aesthetic effect on the surface of the fine cracks, and then fill the groove with a low hardness *** extrusion to achieve the effect of covering up the cracks and making the jade bracelet beautiful.

Disadvantages: While beautifying the jade bracelet, it also causes certain damage to the jade bracelet, and if the damage is too heavy, it may threaten the firmness of the jade bracelet. Therefore, some cracks are very small and have little impact on the aesthetics of the jade bracelet, so it is best not to do any repairs, and will wear them on it, so as not to make it unrecognizable.

Rugged fixes.

Reinforcement repair is a mosaic repair method that may lead to a threat to the firmness of the cracks of the jade bracelet when wearing, which can play a good role in reinforcing the jade bracelet and reduce the possibility of breakage caused by you during wearing.

Method: The direction of the crack of the jade bracelet is parallel to the cross section of the jade bracelet, and the crack is deep, which is most likely to cause the jade bracelet to break, so it is best to repair it by reinforcing repair method. When reinforcing the crack, be sure to use rivets on both sides of the crack to reinforce, so that the effect of reinforcement can be truly achieved.

Disadvantages: It will cause some damage to the jade bracelet.

If there are visible scratches to the naked eye, or there is a natural oxide layer on the surface of the sterling silver, then you can take your sterling silver bracelet to your trusted silver jewelry** for repair and maintenance, and the general merchant will polish your sterling silver ring. The grinding and scratches on the sterling silver bracelet are only metal displacement, and the total volume of the sterling silver bracelet will not be reduced.

Sterling silver bracelets should be maintained in time after wearing, in addition to wearing sterling silver rings and other jewelry, it is also necessary to pay attention to maintenance: it is best to take off the bracelet first when doing housework, and do not let the silver jewelry you wear stained with oil or bleach, which will affect the luster of the jewelry; Bleach may cause spots in the jewelry.

If worn frequently, silver jewelry should be washed once a month to maintain its shiny shine. It can be cleaned with a special jewelry cleaner or by yourself. The right way to do this is:

Squeeze the toothpaste on a towel and rub it back and forth with your hands to remove fine lines and dirt on the surface, then wash it with diluted household dish soap, and then rinse it off with clean water to restore its shine to as new as new.

1. Polishing method.

For plain silver first wounds with a smooth and smooth surface, such as flowerless bracelets and collars, it is better to use this method. When polishing, you can use a silk cloth or toothbrush dipped in a small amount of toothpaste, and repeatedly grind the place that needs to be polished until the jewelry surface is as clean as new, and then wash it with water after polishing.

2. Surface coating treatment.

Applying a transparent varnish film to the surface of the jewelry to isolate the silver from the outside air, the average wearer can use a colorless and transparent nail polish to apply a film on the jewelry, which is particularly simple and does not affect the luster of the silver jewelry, and can eliminate scratches. Depending on the wearer's specific wear and tear, the interval between applying nail polish or clear paint is determined.

Scratches on silver bracelets are a very common problem. First of all, if the scratches on the silver bracelet are not obvious, then we can try to wipe it with a soft cloth or cotton with a little soap foam. If the silver bracelet has deep scratches, we can try the following two methods.

First of all, we can use silver cloth and silver paste to process. Silver cloth is a special cloth that helps us polish silver products. We can apply some silver paste on a silver cloth and gently rub the silver bracelet with the chain until the scratches disappear or become lighter.

Silver paste generally contains a certain proportion of silver oxide, which can help us remove the black oxide layer and scratches on the surface of the silver bracelet.

Another way is to use toothpaste. We can apply some toothpaste to the scratches of the silver bracelet and gently wipe the bracelet with a soft cloth or cotton. Toothpaste contains tiny abrasives that help us remove the oxide layer and scratches on the surface of the silver bracelet scratches.

Whether we are using silver cloth and paste or toothpaste, we need to pay attention to the following points. First of all, we need to wipe the silver bracelet very gently to avoid further scratches; Secondly, we need to wash the silver bracelet and make sure its surface is dry before wiping it. Finally, no matter what method we use, we need to carefully check that the surface of the silver bracelet is completely clean and take proper care after wiping it to avoid re-scratches or oxide layers.

In conclusion, silver cloth and silver paste, or toothpaste, can be used to deal with silver bracelet scratches, but they need to be done carefully and cautiously to avoid further damage. At the same time, we should also pay attention to the daily maintenance of the silver bracelet, including regular wiping and regular application of maintenance oil to maintain its brightness and beauty. <>