Solve, and you re here as soon as you turn it on.10

Check whether the hard disk contact is normal, and then reboot it, if it can enter the system, it means that the hard disk is caused by poor contact, if it can't enter the system, then reinstall the system.

Open the third line of blue English to take a look, or press F10 directly to pop up the dialog box and press the Enter key to try.

Your situation should be uh there may be a problem with the computer host, you can try to restore the default value of the boss, and then take a look, and then if it doesn't work, you can unplug your mouse and keyboard and the peripherals of the computer, and then turn on the computer to see, if you can still get in, that is, the peripherals may have a bad impact on him, if the boot is still like this, it is the computer motherboard is broken, well, you need to go to the computer city to buy a motherboard to replace it, or let the professional maintenance personnel of the computer city check it.

You have inadvertently entered the BIOS system of your computer. And now if you want to go out, you can press f10, which means save. Click OK to turn it on, or if you are not at ease, send it to the computer shop for repair.

It should be a problem with the system or the hard disk. In the BIOS interface, you can see that the hard disk is not.

This is the time you have entered the system menu, it is recommended to reboot it directly, it may have caused you to enter the system menu after pressing something health, directly press and hold the host switch, and then restart it!

The first one is a normal boot to really boot the system to boot, 2 is a boot failure to enter the boot option, it should be that you pressed the f......Got in.

Thank you for your interest.

Turn off your computer and turn it back on. If it doesn't work, unplug it, take a break, and turn it on again.

There was a boot error and the hard drive to boot could not be found. Simply reset the correct boot disk in the BIOS.

Turn off your computer and turn it back on. If it doesn't work, unplug it, take a break, and turn it on again.

It seems that the system can't find the hard drive, so it will jump here.

Press F10 to save and exit.

Is it that the motherboard is going to change the battery?

In three cases, 1. The motherboard battery is exhausted, please replace the motherboard battery.

2. If there is a problem with the hard disk, see if the hard disk cable is loose.

3. The BIOS setting is wrong, you need to find your professional to re-set it for you.

It is recommended to shut down, cut off the power, enter the BIOS after a while, restore the factory settings, and press F10 to save and exit.

The reason why the computer can't turn on and display English is as follows:

1. The operating system file is corrupted.

2. The MBR meter is damaged.

3. The hard disk data cable is loose.

4. The hard disk is broken.

Solution: 1. Reinstall the operating system.

2. Use a U disk or CD to boot, enter the PE system, and use partition software to repair the MBR table (some software is called repair boot).

3. Check the hard disk data cable and power cable, plug in the connector tightly, and replace it with a new one if the cable is broken.

4. If you can recognize the hard disk in the BIOS, try to reinstall the system, if you can't reinstall it, try to repartition the hard disk, if you can't divide the area, try to make the low-level grid type hard disk. I can't recognize the hard drive in the BIOS, so I can only replace it with a new hard drive.

That's it every time you turn it on? Problem analysis: The computer automatically enters the CMOS interface of the motherboard when it is turned on, if you rule out human error to enter (you can press the ESC key to exit), it means that the computer fails to pass the self-test when it is powered on, which is generally a CMOS parameter error or hardware failure.

Common phenomena include battery failure, misconfiguration, poor memory or hard disk contact, etc., which need to be investigated one by one.

Solution: 1. Battery failure: cause the computer to call the default parameters of CMOS, if it is inconsistent with the local hardware environment, the computer cannot be started normally.

You can purchase a motherboard battery to replace it, then turn on the computer and press the DEL button (F2 or other designated hotkeys for notebooks) to enter the CMOS interface, and reset the correct parameters, and finally press F10 to save and exit the reboot.

2. Configuration error: This situation will also occur due to the manual configuration of CMOS parameters that do not match the local hardware environment. In general, you can press the F1 key to skip the non-fatal error and start the computer directly according to the prompt message on the black background and white text on the screen, or press the del key to enter the CMOS, then press F9 to load the predefined parameters or select Load optimized defaults or load fail-safe defaults, and then press F10 to save and exit the restart.

3. Hardware failure: If the above operations are invalid, it means that there is a problem with the hardware, generally because the memory and the hard disk are in poor contact or the hard disk master boot record is damaged, and the memory or hard disk needs to be reinserted and unplugged, or the hard disk master boot record is repaired or the system is reinstalled or the hard disk is replaced.

Check SATA and press Enter. That's it. If you still enter this screen after entering, you can only reinstall the system.

According to your description, it is recommended that you find the after-sales service of the computer and let the professional technicians help you solve this problem.

It's really not possible to change a mobile phone, the fastest solution.

This is an illegal shutdown or other reason caused by the disk damage, please repair it (fix each disk or only fix the C prompted).

Built-in disk repair method:

The specific steps are as follows: select the drive letter C in my computer, right-click the mouse to select the properties, select "Tools Start Checking" in the pop-up drive properties window, and select "Automatically repair file system errors" and "Scan and recover bad sectors", and then click Start, the scanning time will vary depending on the disk capacity and scanning options (after doing it according to the above method, a box will pop up, the point is, repair after automatic shutdown, and win78 select the Disk Check button according to the plan).

Bad sectors on the hard drive will lead to corruption or loss of computer system files, computer failure to boot or freeze. Hard disk bad sectors can be repaired using NDD Disk Utility or Scandisk.

If the fault persists, please restore the system or reinstall it (it is still not possible to format the hard disk and repartition and reinstall it, and go to repair it if it does not work).

If you can't get into the system, find a way to enter the system to repair the disk, press the enter key, wait a while to see if you can repair it yourself, reinstall the system, and go to the repair to help you.

If it only appears once, it won't come out next time, don't mind, it means that the system repaired the fault by automatically.

The system disk is scanned incorrectly, waiting for it to run out, or the space enters the esc skip.

The system files are missing, let's redo the system.

System problems, just reinstall.

This is usually caused by a large number of fragmented files generated by the abnormal shutdown of the computer. You need to run the disk self-test program, and you don't have to worry about it running to 100% when you boot up. This screen won't appear next time.

System hardware checks.

Generally speaking, it should be that you have had a direct power outage before.