-
1. Press F8 to press F8 to get the advanced option to appear in the release of the power, and select "The latest correct configuration" Enter to repair. 2. Please boot the computer and press F8 to enter the safe mode, use the system's built-in system restore, and restore it to the time when you did not have this failure.
3. If the fault persists, use the system disk to repair it, open the command prompt and enter sfc scannow Enter (there is a space between sfc and ), insert the original system disk to repair the system, and the system will automatically compare the repaired.
4. If the fault persists, set the optical drive in the BIOS as the first boot device, insert it into the system installation disk, press the R button, and select "Repair Installation".
5. If the fault persists, it is recommended to reinstall the operating system.
If it really doesn't work, it is recommended to choose repair installation, so that the system can be repaired, and the programs and files of the C drive can not be lost.
If a computer crashes when it starts, it can be divided into two types: POST and crash when loading the operating system. The specific troubleshooting methods for crash faults during computer self-test are as follows.
1) First of all, determine the situation before the computer failure, if the computer crashes after moving, it may be that the computer is subjected to a lot of vibration during the move, resulting in the loose internal parts of the computer and poor contact, resulting in a crash. Open the case and re-tighten the memory, graphics card and other devices.
-
1. Reason 1
According to the official version, the slow boot is due to the "Quick Start" feature. This is because the implementation of Fast Boot is based on the graphics driver and the power management driver, but there are many drivers that are not compatible with the Fast Boot feature, resulting in slower boot speeds.
Once you've found the cause, it's easier to fix it by turning off Fast Startup.
2. How to disable Quick Startup
Right-click on the win logo in the bottom left corner of the screen and click on "Control Panel". In the Control Panel, click on "Hardware & Sound".
Then tap on "Change the function of the power button".
Then click "Change settings that are currently unavailable".
Note that if Enable Fast Startup (recommended) is not selected before, check and save the changes first, then uncheck and save the changes again (that is, you can perform Check-Cancel once).
-
If it crashes when it is turned on temporarily, it means that there is a problem with the system, and if you use that win10 mirror-like words to fix it, it should not crash.
1. Win10 boot black screen can't enter the desktop 1, turn on and enter the system for a long time press the power button to turn off, repeat about 3 times; >>>More
It is likely to be caused by pirated system or incompatible hardware drivers of the computer itself. Try the following. After seeing the boot screen, press and hold the power button to turn off the power, and repeat it about three times in a short period of time to enter Winre (Windows Recovery Environment), but some users may need to disconnect the power directly. >>>More
1.Open this computer (that is, my computer before), then right-click on the C drive, and select Properties; >>>More
The blue screen at boot is related to your improper operation before the shutdown (please think about what you did on the computer before the shutdown, and ask me if you have any questions). >>>More
Reseat the memory.
Troubleshooting. >>>More