What kind of boards are used to make cabinets at home? Which plate is better?

Millennium Boat adopts healthy and environmentally friendly MDI ecological glue, the formaldehyde emission of the board is far lower than the national standard, and at the same time integrates high-quality wood resources at home and abroad, establishes a raw material base, fully relies on the advantages of base and batch raw materials, and is in line with international standards. Millennium boat boards are widely used in wood structure houses, decoration, furniture, wooden doors, flooring, packaging, automobiles and other fields.

1.MDF, which is made from finely crushed wood fibers pressed at high temperatures.

2.Solid wood particle board, it is a new type of environmentally friendly building materials.

3.Solid wood multi-layer board, it is taken three layers of solid wood veneer larger than 1 mm.

What are the plates for making cabinets at home, and which boards are more suitable? Personally, I think that if you make cabinets at home, many large plates are better, and I personally think that the effect of rabbit is very good.

On the question of what kind of wood materials are used to make cabinets at home, I personally think that I should search on the Internet again to see what kind of materials my netizens have chosen?

Plate is an indispensable and important decoration material in modern life. Panels are used when making furniture, and panels are good decoration materials after processing. At present, there are various types of plates on the market, and the specifications of each plate are also different, so users do not know how to choose.

The following is an introduction to the types of plates. First, the paint-free board is the paint-free board.

1. What kind of board is good for making cabinets - MDF (fiberboard).

MDF, also known as fiberboard, is mainly made of finely crushed wood fibers that are pressed at high temperatures. The surface of MDF is smooth and flat, the material is fine, the performance is stable, the impact is resistant, easy to process, and the application is wide. However, MDF is not moisture-proof, and it is easy to expand and deform when exposed to water, so it is not suitable for cabinets in kitchens and bathrooms.

2. What kind of board is good for making cabinets - solid wood particle board Solid wood particle board is now a relatively new environmentally friendly substrate, which is produced according to the process of particleboard, which has the essence of natural wood and is relatively high-grade and environmentally friendly. At the same time, the processing performance is not bad with particleboard, and it has the characteristics of heat insulation and sound absorption. However, its process is relatively simple, so the quality difference is large, it is difficult to distinguish the good and bad products, and its bending and tensile resistance are poor, which is not suitable for making large cabinets.

3. What kind of board is good for making cabinets - solid wood multi-layer board Solid wood multi-layer board is mainly made of three layers or more of one millimeter solid wood veneer or thin board by glue hot pressing, and the material of the core is mainly poplar, miscellaneous wood and amine wood, etc., which has high strength and good stability. Solid wood multi-layer board has a large glue content, and it is necessary to do a good job of edge sealing treatment during construction to reduce pollution.

4. What kind of board is used to make cabinets - blockboardBlockboard is also a large core board, which has the characteristics of good nail holding force, firm quality, high strength, sound absorption, heat insulation, etc. Moreover, its moisture content is not high, the surface is flat, no warping, no deformation, and will not blister, which is an ideal material for interior decoration and high-end furniture production.

5. What kind of board is good for making cabinets - fir board is a kind of laminated timber, which is mainly made of large-diameter logs, which is made of deep processing, and the shape is staggered and spliced like a finger. It can be painted and painted directly, saving a process compared to blockboard.

Particle board is a type of particleboard, which is a board that is made by compacting wood blocks into pellets and then gluing them together under high pressure. Due to its low cost and high selling price, it is favored by many merchants. However, compared with multi-layer boards, particle boards have uneven density, which is more likely to absorb moisture and water, resulting in cabinet deformation.

Multi-layer board, also known as plywood, is made of three or more layers of veneer or sheet glue and hot pressing. The stability performance is good, but the plasticity performance is average, and the engraving process is easy to burr. Because the multi-layer board is not easy to crack and deform, and the nail holding force is stronger, and the amount of glue is less at the same time, it is closer to solid wood, so in the actual use effect, the multi-layer board is better than the particle board.

The large core board is made of two pieces of veneer glued and spliced wood in the middle. The intermediate plank is made of high-quality natural wood planks after heat treatment and processed into wood strips of a certain specification. It has the advantages of light weight, easy processing, good nail holding force, no deformation, etc., and is an ideal material for interior decoration and high-end furniture production.

There are a variety of boards on the market, and you still have to choose the most suitable material for yourself according to your own situation.

The selection of cabinet panels should choose this environmentally friendly material, less formaldehyde, this is relatively healthy, and the new environmentally friendly material composite board is conducive to the use of the human living environment.

I think it's best to choose MDF for cabinets, because MDF is more durable, and it can achieve the effect of fire prevention, it is also more environmentally friendly, and it is also very convenient to decorate

I already don't have hope, the cabinet door made by myself must not be good-looking, the inside and outside are a color, I can see the ** go, I didn't expect to make a home in the end The effect is very good, that is, the style is not as good as the custom cabinet, but it still looks very tall, saving almost half of the money, or cost-effective, I knew that I bought a board to do it at the beginning, and I was still entangled in something, it may be that now the boards are paint-free boards, *** some, it is the kind that looks bright, and the hygiene is easy to do.

There are also a lot of boards for cabinets, generally speaking, you should be woodworking, so it is basically based on ecological boards. Because it does not need to be painted, the process is simple, the colors are diverse, and the advantages of wear resistance and scratch resistance have been loved by the public. However, other plates are also possible, and most of the cases are customized, such as:

Particle boards, multi-layer boards, and so on.

1. Particle board. The trunk, branches, branches, turf, straw and other materials are planed into pieces and pressed into hard boards by high-pressure spraying, which are not easy to deform and are a good choice for cabinet doors.

2. Multi-layer boards. The multi-layer board is lightweight, high strength, strong nail holding force, bending resistance, and has good elasticity and toughness. It is mostly used in cabinets, doors, backboards, and bottom plates. ** It has more advantages than solid wood.

Plywood, MDF, lacquered board, solid wood board, particleboard, are all suitable for cabinets, and the patterns are very rich.

The more common boards are, particle board, ecological board, finger joint board, multi-layer board, high-density MDF, solid wood particle board, and particle board.

Fir boards, ecological boards, multi-layer solid wood boards, particle boards, MDF, these boards are very practical and very common.

For example, there are solid wood boards, particle boards, ecological boards, MDF, particle board, joinery boards, and multi-layer boards.

What are the plates that are generally used for cabinets? What are the best ones to use at home?

1.Generally, the boards used for cabinets are solid wood boards, which are cut from pure natural wood, which have natural textures, wear resistance and load-bearing, and are a kind of boards with high environmental protection. But because it is an all-natural material, the cost is high, ** is the most expensive of all materials.

In addition, the density and hardness of solid wood panels are lower than those of wood-based panels, the nail holding force is poor, the cabinet body is used for a long time, and the risk of deformation is large.

2.Generally, the board used to make cabinets has MDF, and the least recommended board is made of wood fiber or plant fiber, adding a large amount of synthetic resin glue, and then hot pressing. It is subdivided into low-density board, medium-density board, and high-density board.

But regardless of the density, the formaldehyde content is the highest among several types of boards. It is not recommended that you have this kind of panel furniture in your home.

3.It is better to use particle board at home, although it is the "darling" of first-line brands, it is the "garbage" in the eyes of consumers. Shredded board, also known as solid wood shredded board and particleboard, is a board made of waste wood or miscellaneous wood that is bonded with glue at high temperature after crushing.

The biggest advantage of this kind of plate is that the raw materials are easy to obtain and relatively cheap. It is an economical board, but the load-bearing capacity and deformation resistance of particleboard are better. However, the nail grip is poor, it will rise when exposed to water, and the waterproof is poor.

The reason why it has become the "darling" of first-line brands is because of its low raw materials. Therefore, if there are conditions, it is not recommended to buy particle board. It's better to buy a board with better cost performance.

4.It is better to use a large core board at home, and it is recommended to use a large core board, which is actually also called a blockboard. This type of board is also divided into different types depending on the core material.

For example, some cores are made of whole wood, but some cores are spliced together. Generally speaking, on the upper and lower sides of the large core board, a layer of veneer is pasted, and in the middle is a wooden board or wooden strip. Personally, I don't think it's particularly environmentally friendly.

In terms of environmental protection, the large core board is behind the solid board and the fingerboard. But it's still good in other ways.

When decorating the home, no matter when selecting each plate, of course, it is necessary to choose a more cost-effective one, and the decoration material should also be more environmentally friendly. Therefore, it is also very important to choose the board when playing the cabinet, and it must be selected for processing, which has better performance, anti-deformation and anti-cracking effect and is more durable. There are many brands of plates in China that are more suitable for wardrobes, if it is not environmentally friendly, it is still very worrying, usually when choosing plates, it is still necessary to choose according to all the stable structures.

To put it bluntly, everyone will definitely have different modeling styles when decorating, and there will be different resolutions when selecting plates. However, the most important thing is to choose a relatively flat structure, the internal quality is more consistent, and the more layers of wood, the higher its strength will definitely be. However, the higher it must be, if the budget is not very high, it is still necessary to recommend some cost-effective manufacturers.

When encountering very bad adhesives, it is environmentally friendly, and it is certainly not very good for these special boards, and woodworkers will also use this kind of plywood when they are advised. <>

The moisture content and wear resistance of the plate with good sound insulation effect are also relatively good, and the thickness of most of this plate is not more than three centimeters, so it is recommended that you still choose a wider one when choosing the thickness. In this way, it will not collapse, and even if there are nails on the board, you will not be worried, and you can fill it with glue. And it will not be afraid of moisture, most of the kitchen cabinets and bathroom cabinets are to choose this kind of board, which is widely used in cabinets, wardrobes, and even bathrooms will choose this kind of board with good sound insulation effect.

No paint, especially when selecting cabinet plates, do not choose colorful patterns, all kinds of plates do not need to be painted, so that the process of reducing paint is also very environmentally friendly. The performance is still relatively good, very easy to process, not easy to deform, in the furniture to be used reasonably. Especially in the interior design, the perfect workmanship is required to be more detailed, but the quality of the hardware still has to pass.

When decorating, various problems are still relatively extensive, and for the contrary, it is necessary to choose the plate according to its own **.

It is very easy to use the solid wood plank, and the solid wood is also more conducive to storing some clothes, and it can also play a good moisture-proof and moisture-proof effect.

It is better to use composite panels or solid wood panels for cabinets, as both panels are very durable and moisture-resistant.

Solid wood particle board: Solid wood particle board is a new, high-grade and environmentally friendly substrate, which is a board produced by the process of particleboard.

The cabinet can use solid wood boards, solid wood particle boards, solid wood multi-layer boards, composite particle boards, composite multi-layer boards, etc., these kinds of boards are of very good quality, and not easy to deform, and the price is also very cost-effective.

Solid wood particle board can be used, the quality of such a board is particularly good, and its cost is particularly low, and its stability effect and anti-cracking effect are particularly good.