Computer Blue Screen 0 000000F4 0 00000003 0 86757138 0 867572AC 0 80607586

The memory module is reinserted.

That's what I did, anyway. Hey.

Friend, the reason for the computer blue screen is very complicated, and it is a conflict between the software! [Refer to Article 3]!

1。If this is an accident, usually restart the computer and the symptoms will disappear!

2。Incomplete anti-virus (use anti-virus software, full scan and custom scan)!

3。Software conflicts, incompatibilities: redundant similar software installation, (360 Butler, software uninstall, find uninstall, again:

4。The computer system has stubborn viruses and Trojan horses or worms interfere with, or the system files have been lost (360 system emergency.

Rescue box or Kingsoft first aid kit, Kingsoft net shield, etc., any of them, full killing, and then: system repair).

6。There are new vulnerabilities waiting to be installed in the system (patched for high-risk and important, others are set to: ignore).

7。Graphics card or memory CPU, or fan is in poor contact and loose or has dust covered, (unplug the eraser) Note is: Desktop!

8。The memory CPU is overheated, and the heat dissipation is not good! (Don't turn on for too long, turn off and dissipate).

9。There is a bad comment plug-in on the computer! (Scan it out, clean it up immediately).

11。If it still doesn't work, the system files are missing! Or maybe there's a serious error in the system memory!

12。Reboot the computer, after the computer brand is out, press F8, enter the safe mode, the last correct configuration, press enter, press enter, try!

13。Playing games on the blue screen, generally the system does not support this game! (Change game version).

15。If it still doesn't work, you need to "one-click restore" the system or "reinstall the system"!

This answer is not copied from the Internet, all of it is me: "Liwang History", I have been "knowing" for a long time to summarize and practice myself, as well as the experience of the majority of netizens!

This is usually caused by a faulty driver or system service.

Think about what drivers were installed before this issue occurred. Try uninstalling it first.

Safe Mode: Rename malicious drivers by using My Computer1Start your computer in safe mode. To do this, follow these steps: aRestart your computer.

b.When the computer starts, press the F8 key repeatedly (once per second). This displays the Microsoft Windows Advanced Boot menu options.

c.Use the Up Arrow and Down Arrow keys to highlight Last Correct Configuration, and then press Enter.

If there is a memory problem, you can re-plug or wipe it, and if it doesn't work, you can find another memory and try it.

It may be caused by overclocking.

It is also possible that system files are lost, reinstalled or restored to the system.

If the configuration of the new assembly machine is not reasonable, there will be a blue screen The meaning of the following ** is 0 0000000a:

Error Analysis: Mainly caused by faulty drivers, defective or incompatible hardware and software. From a technical point of view, it indicates that there is an in-process internal request level (IRQL) in kernel mode that is too high to access memory addresses that it does not have permission to access.

Solution: 1 Whether you have added new hardware, if you have one, you should check whether the new hardware is plugged in, this problem is often ignored by many people, and it often leads to inexplicable failures. If you confirm that there is no problem, unplug it and try a different slot, and install the latest drivers. At the same time, check whether the hardware is compatible with the operating system against Microsoft's hardware compatibility list.

If your hardware is not in the list, then get the hardware manufacturer** to inquire, or call** to consult.

There is an error in the memory, and the reboot will be fine.

Failure Analysis:

1. System, system files are missing, unstable causes blue screen, reinstall troubleshooting.

2. Hard disk, hard disk bad sector or red dot, will create a blue screen, can be used, MHDD detection (before detection and repair, please back up the useful information of the hard disk by yourself).

How to operate, boot the optical drive to start running the DOS tool in the system disc or U disk PE tool, enter "MHDD" in the command line, and then check the hard disk in front of the detected hard disk, select the number in front of the hard disk, press F4 twice, that is, check the whole disk, the detection time depends on the capacity of the hard disk, and the cross sign appears after the detection is indicated as a bad sector, red dot and so on! Repair method, enter erase in the command line, press enter twice to repair, if you don't know about the software, then send it to a professional repair point for maintenance, please send it to the manufacturer's warranty.

3. Memory, memory instability, poor contact, will cause the machine can not be turned on, if there is existing memory, please replace the test, if not, please clean up the oxide layer of the memory, re-plug the computer, if the boot is normal, troubleshooting.

Friends in Shantou City can come to my store for maintenance, good luck!!

85fc09b8

Let's switch to a better operating system.

The blue screen is nothing more than a corrupted system core file.

And it won't cover or it just won't cover.

But first of all, make sure that the hard drive is healthy and the memory is healthy.

Run the program that comes with your computer and you're good to go.

Normal in the installation of a new system or a stable system for other workers.

Hello friends, the blue screen of a computer is generally caused by the existence of physical memory! Usually a reboot will do the trick! Sometimes, software conflicts can also cause a blue screen on your computer.

But at the end of the day, software conflicts are memory issues that cause blue screens! There are also some viruses that may cause a blue screen on the computer, so it is recommended that you kill the virus well, and it is recommended that you use 360 antivirus software to check and kill the virus; And optimize the system with Optimizer! There are also hardware compatibility reasons.

Compatibility issues can also lead to blue screens! It's up to you to decide why.