K2, the abnormal sound of the central control bright strip How to remove the bright strip separately

Just pry it after heating it.

1 All Kia's common problems, the central control abnormal noise can generally only be disassembled from the panel, one by one disassembled, the panel and the base frame of each fitting connection pad sponge or double-sided glue glued, of course, it is best to use car sound insulation cotton, a large area of the place with aluminum sheet which! If you have time, you can try it, and if you don't have time, you can find a professional decoration store to do abnormal noise elimination and sound insulation.

In this case, it is usually caused by loose parts inside the center console, so it is recommended to check it at a repair shop.

Kia K2 center console abnormal noise, I personally think that there may be a deviation in the plastic mold of the car or the installation of displacement, bumps caused by mutual friction and squeezing loose sound, generally find the position of the sound to confirm the friction point, pad the rubber to block it, play a certain buffering role.

Now most of the center consoles are clip cards, it is recommended not to disassemble them yourself, you can go to the 4S shop to find a professional master to disassemble.

Needless to say, the importance of the center console to a car, the function buttons of air conditioning, audio and other comfortable entertainment devices are arranged on the center console, and the driver has to deal with the center console at any time, and the design and arrangement of the center console also affects the comfort of the car, and also affects the driver's feeling. Therefore, the center console can also reflect the comfort and various functions of a car to a certain extent.

1.If it does not affect the opening, it is better not to disassemble the center console.

2.LaCrosse's door is relatively heavy, and it sinks a little after a long time, so you can go to the 4S store to adjust it.

Detect the specific abnormal noise part, if it doesn't work, disassemble the workbench and fix it well, it won't sound if it is not loose.

1. The engine has abnormal noise.

Symptom description: There is a lot of abnormal noise in the engine compartment, and most people also judge it to be the abnormal noise of the engine compartment by the sound**, which is usually a metal screeching sound or a howling sound.

Solution: The abnormal engine noise indicates that the technical status of a certain mechanism of the engine has changed. It is mainly caused by excessive wear and tear of some parts or improper assembly and adjustment.

Some abnormal noises can still predict that the engine will be damaged accidentally, so when the engine has abnormal noise, it should be repaired in time to prevent the fault from expanding.

It should be reminded that if it is an abnormal noise in the engine, most of the owners will not be able to solve it by themselves, and it is best to send it to the factory for maintenance.

2. There is abnormal noise in the gearbox.

Symptom description: If there is a "rustle" sound inside the gearbox while the car is driving, and there is no more after pressing the clutch or accelerator, there will be a whistle-like sound when changing gears.

Solution: There are many transmission parts, and the reasons for the sound are more complex, so we should pay attention to whether it is related to a specific speed, such as some planetary teeth that sound at about 50km h.

Whether it is related to certain gears, which is very important for judging the failure of the transmission, if a certain gear sounds, it must be related to the components that affect the transmission of the gear; If all gears sound, it is often a common meshing shaft failure or a lack of oil in the transmission. Whether it is related to specific actions, such as increasing and decreasing gears, starting, rapid acceleration, sharp deceleration, turning, etc., are effective means to judge abnormal noise, among them, changing speed and direction are particularly important for judging the rear axle fault.

If the abnormal noise of the transmission is obvious, it is recommended to send it to a professional repair shop to check the faulty parts, and then replace them.

3. There is an abnormal sound in the door.

Symptom description: When driving on the accelerator or brake, there is always some abnormal noise in a certain part of the body, the sound is not loud, and it does not affect normal driving, but it always makes people worry a little about the failure of the body.

Solution: The abnormal noise of the door is mainly caused by the lack of lubrication, but it is necessary to judge whether it is the position of the door hinge or the glass regulator, door lock mechanism, handle mechanism, etc. inside the door. In the case of door hinges or limiters, special door hinges and slide grease can be used, while special door attachment grease is used for lubrication of glass regulators, door locking mechanisms, handle mechanisms, etc. inside the door. In terms of brand selection, try to choose the commonly used brands in 4S stores, such as Kruber, Hotolube, Fox, etc.

It is not advisable to use engine oil or ordinary butter, it will freeze in winter, and the harmful smell will affect your health.

Workaround:

As long as the surface of the instrument panel is pressed hard, the abnormal sound will disappear or the sound becomes smaller, and it is concentrated in, the position of the LCD screen to the left side of the A-pillar area, from left to right two-thirds of the area, the right side is not sound, and it is also found that the instrument panel is especially obvious near the front windshield, so according to these characteristics, repeated scrutiny, and finally determine the position, that is, the air outlet of the windshield, because the fixed is not very good, resulting in abnormal noise, the associated impact on the left horn and the middle of the instrument panel, abnormal sound, The method of determining the abnormal noise area can also park the car in a flat place, gently tap the face of the instrument panel with your fist, and feel whether there is a sound with the abnormal noise or what kind of sound is more scattered. The solution is very simple, disassemble the dashboard, put your hand in it, square them to the right position, and then use a little double-sided tape, slightly glued, and it will be completely solved. They refer to the air vent at the windshield and the light sensor under the windshield, which is the small bulge, which one, especially this one must be glued to the left end.

1. If the plastic mold has deviation or installation displacement, bumps cause mutual friction and squeezing to loosen the sound, find the position of the sound to confirm the friction point, and put on the rubber to block it, which has a good cushioning effect, 2. If not, find some inner tube of the car to do, if it is loose, it is tightened first to make the rubber buffer.