How to fix a leaky toilet flush valve, how to fix a leaky toilet outlet valve

Lift the float arm in the toilet tank up first, if the float cannot reach the specified height when the water flow stops, and the valve post is pressed into the float valve. Then the water leakage is likely to be caused by friction between the float and the sidewall during flushing, as long as the float arm is slightly bent to keep a little distance between the float and the sidewall.

There are two parts in the toilet bowl that are very important, one is the inlet valve, and the other is the outlet valve, in which the function of the inlet valve is to control the inlet of the water, and by closing the upper water valve, the amount of the water tank can be adjusted. Another is the outlet valve, but if the outlet valve has a leakage problem, how should it be repaired?

1. The reason for the leakage of the toilet outlet valve.

1. There is a water sealing sheet on the toilet outlet valve, but if there are some foreign substances stuck on it, it will lead to the problem of water leakage in the outlet valve.

2. In addition, we can also check whether the sealing ring of the outlet valve is damaged, if the sealing ring fails, it will naturally lead to aggravation of water leakage.

2. What should I do if the toilet outlet valve is leaking?

1. First of all, let's check whether the switch of water inlet is loose, directly observe whether the float is floating, and need to tighten the valve switch, if there is a problem of not sealing, it will also lead to water leakage.

2. If the sealing ring at the bottom of the outlet valve is damaged, go directly to the hardware store or toilet sales market to buy a new sealing ring, and replace it after buying it back, so as to ensure the tightness, and there will be no water leakage problem again in the future.

3. At the same time, we also need to pay attention to the fact that there can be no impurities on the water sealing sheet on the outlet valve, and the impurities on it need to be cleaned up, so that the problem of water leakage can be directly solved.

3. What should I do if the toilet leaks?

Sometimes it is not only easy to leak at the outlet valve, especially at the bottom of the toilet, but also prone to leakage, sometimes because the toilet has obvious cracks, and the water will slowly seep along the cracks when draining, or it is the bottom of the toilet, and its glass glue fails, which will lead to poor bottom sealing, which will cause the problem of water seepage.

It is also relatively simple to solve, you can reapply the bottom of the toilet bowl with glass glue, and you must pay attention to wipe the surface clean before applying it to ensure that the seal is effective.

Summary: There are many reasons for the problem of water leakage in the toilet, such as the outlet valve of the toilet or the bottom of the toilet is prone to leakage. Of course, sometimes the quality of the toilet or the parts are damaged, and only need to be replaced to solve the problem of water leakage.