How do you fix a leaky toilet? How do you fix a leaky toilet?

1.First, use a knife to cut the glass glue at the junction between the toilet bowl and the floor tiles, and then unscrew the bolts that hold the toilet open.

2.Raise the toilet a little higher. Never pull or push the toilet bowl into place. It is more troublesome to break the sewer pipe.

3.Then check the sewer pipe for cracks, and then connect a PVC pipe of the same thickness, stick it with PVC, put the toilet on the top and try it, maybe the length is not suitable, and then use a saw blade to see until the toilet can stabilize and stick to the floor tiles.

4.Test the water and it won't leak. Glue the base to the floor tiles with glass glue and tighten the screws to secure the toilet. Don't shake the toilet back and forth for three days. Just wait for the glass glue to dry.

Toilet leakage, which needs to be solved according to the specific cause, is as follows:

1. If the toilet tank leaks due to the material problem of the water tank, separate the toilet tank and check it one by one to see whether the parts in the toilet tank are in good condition. If there are parts that are broken, they can be repaired, and those that cannot be repaired are best replaced. If the pump tank is too inferior and there is more damage, it is recommended to replace the entire tank to avoid more serious consequences.

2. The toilet tank leakage caused by the failure of the drain valve, because the drain valve needs to be detected with many professional tools, it is recommended to ask professionals to repair it.

3. If the toilet tank leaks due to the failure of the sewer pipe, carefully check the interface between the toilet bowl and the sewer pipe to see if it is loose or whether the pipe is broken. If so, the pipes need to be replaced; If it is just not connected, you can use some wire or fixing material to fix it.

4. If the toilet tank leaks due to the failure of the water scoop, the water scoop can be removed and cleaned. If you can't disassemble it, just drain the water in the tank and try to wash it with dish soap and laundry detergent.

Notes:When installing a toilet, never forget to install a flange. The flange can not only play a certain role in fixing the toilet, but also have sealing performance, which can effectively prevent the dirty water in the toilet from leaking out; Note: Before repairing the toilet, it is important to determine the cause of the toilet leakage, and do not repair it blindly.

Summary. Hello, the repair method of toilet leakage is: first turn off the angle valve, open the toilet lid to check whether the water dispenser has been on the water, and then see if the screw is too long, you can also use a screwdriver to pry it out and clean it, and then see if the spring is broken, or the elastic force is small, if the elastic force is small, you can weigh the spring again, and then reinstall it after it is done.

How do you fix a leaky toilet?

Hello, the repair method of toilet leakage is: first turn off the angle valve, open the toilet lid to check whether the water dispenser has been on the water, and then see if the screw is too long, you can also use a screwdriver to pry it out and clean it, and then see if the spring is broken, or the elastic force is small, if the elastic force is small, you can weigh the spring again, and then reinstall it after it is done.

Secondly, the reasons for the leakage of the toilet are: 1. The internal parts of the water tank are aging; 2. Leakage at the connection between the toilet bowl and the sewer pipe; 3. The toilet bowl itself is cracked; 4. There is a problem with the water inlet group or outlet group of the toilet; 5. The flush toilet tank is leaking. Toilet leakage symptomatic symptomatic aging of internal parts of the water tank:

If the internal parts of the tank are aging, there is no other option but to replace the parts quickly. Symptomatic leakage at the connection between the toilet bowl and the sewer pipe: If the connection between the toilet bowl and the sewer pipe is leaking, the toilet bowl needs to be reinstalled and the sealing pipe should be resealed.

Symptomatic cracks in the toilet itself: If the toilet leaks due to cracks, it is best to replace it with a new toilet. Problems with the inlet and outlet groups of the symptomatic toilet:

You need to open the water tank and see that the water tank is overflowing, and the water flowing out of a water pipe indicates that the water inlet group is broken, and if there is a sound of water ingress, the water outlet group is broken. Symptomatic water tank leakage: You can take off the drain machine to clean the scale, if it still doesn't work, you need to change the toilet.

Toilet leak repair method steps: 1: First open the toilet tank to see what level the scoop inside the water tank is at when it is full of water.

If the water inside is full and the tank is still flooding, then there must be a leak coming out. Two: use water to pull the card position of the water scoop up and down, the sensitivity of the water scoop, if it is not smooth, or it is difficult to move, then it is announced that the water scoop equipment has failed.

Three: Remember to press the position of the water scoop a little, not too high. If you don't know how to disassemble, you can directly put dry water in the water tank, clean it with dish soap and washing powder.

Four: If you can continue to use it, if not, you need to replace it. Check the connection of the stainless steel hose on the outside of the water tank, at the location of the water tank, to see if it is not tightened or if the rubber pad inside is aging and leaking.

This must be ascertained. Five: If the internal equipment is fine, then you also need to check whether the toilet tank has the problem of cracking caused by impact, and if there is an external force, the water tank may also have the problem of water leakage.