What should I do if the porcelain toilet leaks? How is a leaky toilet caused and what to do if the t

Usually the inside of the toilet bowl has a gasket seal, in this case, glass glue is applied around the toilet. If the inner sealing ring is broken, and you want to replace the inner sealing ring, use a utility knife, adhesive tape, wrench, glass glue and glass glue gun, and then replace it after removing it and reinstall it.

That depends on where your toilet is leaking from.

1. First of all, look at the reason for the leakage of the toilet, if the water inside the tank is full, and the scoop exceeds the horizontal line, it will leak out.

2. Pull the scoop up and down to see its sensitivity, if it is not smooth, it may be that the scoop equipment is faulty, you can press it down a little.

3. Remove and clean the water scoop equipment, and then install it for use, if it still doesn't work, then it needs to be replaced.

4. If there is no water leakage because of the internal facilities, then see if the outside of the water tank is cracked, if this is the case, the water tank needs to be replaced.

It is recommended to change a toilet, there are many brands of toilets that are very easy to use, you go to the mall to have a look, the quality is good, you can use it for a longer time.

If the water leaks, just find out the merchant and change it? Generally, there will be a quality guarantee time when buying, and if it exceeds the replacement time, it will be repaired, so it is good to find the point of sale directly.

The reasons why a flush toilet leaks are as follows:1. The rubber ball valve is broken: once the rubber ball valve is broken, the sealing of the entire water tank is not good, just like there is a hole in the wooden barrel, so the water will continue to flow out.

2. Aging of the rubber gasket of the mixing port: After long-term use, the rubber gasket will become thinner and thinner, and eventually it will be completely aged.

3. The link between the floating ball and the water inlet switch is loose: open the toilet tank, we can see a small ball floating on the water surface, and the small ball is connected to the water inlet with a water pipe, check whether the connection between the two is tight, if it is loose, just tighten the connection.

4. The water tank is damaged by external force: the water tank may be damaged by external force, resulting in water leakage.

Cause of toilet leakage: This is due to cracking and leakage at the interface between the toilet inlet and the sewer pipe. There are three situations in which a small amount of water leakage can occur:

1. The rubber ball valve is broken, the seal is not tight, and there is water leakage, as long as it is replaced. 2. The rubber gasket of the drain port under the ball valve is aging and the sealing is not tight, so it needs to be replaced. 3. The connection between the spherical float of the water tank and the water inlet switch is loose, the float is in place and the switch is not closed, resulting in the water inlet does not stop, and the water flows out from the upright discharge pipe after the water is full, as long as the connection between the float and the water valve switch is tightened.

Toilet leakage repair method: 1. First use a knife to cut the glass glue at the joint between the toilet bowl and the floor tile, and then unscrew the bolts that fix the toilet. 2. Lift the toilet a little, don't pull or push the toilet in place, it will be more troublesome to break the sewer pipe.

3. Then check whether the sewer pipe is cracked, and then connect a section of the same thick PVC pipe, stick it to death with PVC glue, put the toilet on it to try, the length may not be suitable, and then use the saw blade to see until the toilet can be placed stable, and the floor tile is close to the principle. 4. Test the water, no water leakage, glue the base and floor tiles with glass glue, and tighten the screws to fix the toilet. Take over the toilet bowl within three days, don't shake it back and forth, and wait for the glass glue to dry and you'll be fine.

If the toilet is leaking, you can do the following:

Open the water tank, see the water tank is full, water from an overflow pipe, it means that the water inlet group is broken, if you hear that the water tank is for no reason there is a sound of water ingress, that is, the water outlet group is broken, which needs to be repaired or replaced the water inlet group or outlet group.

If the water leaks from the bottom of the toilet bowl after flushing the toilet and is accompanied by a foul smell, then it can be determined that the seal between the drain pipe at the bottom of the toilet and the toilet is not good enough, which requires a new sealant.

In the case of unobstructed drainage, so that the dirt backs up, to deal with this situation, it is necessary to determine whether the drain pipe is not smooth, if it is caused by unobstructed, it is necessary to reinstall the toilet, this situation is generally when the toilet is installed shortly.

Toilet leakage is a very speechless and depressing thing, the cause and situation of the leakage are different, and the treatment methods are also very different. In general, either find someone to fix it or fix it yourself. The following is an analysis of the causes of toilet leakage:

If the toilet leaks from which part, if it is leaking from the water tank, you can take off the drain machine core, clean up the scale, if not, it can be replaced: if the bottom of the toilet leaks all over the place, hit the glass glue, it can not be used within 24 hours, or remove and reinstall. If the float is leaking, see if the float is damaged, if yes, replace it, if not, take off the float, put glass glue on the float gasket, and install it.

I hope it helps you and I wish you a happy life.

Causes of toilet leakage:

1. The toilet was not installed properly when it was installed, resulting in the misalignment of the sewage outlet on the ground with the toilet sewage caliber. In this way, there will be yellow water and a foul smell.

2. The installation is not professional, and the flange is not installed.

3. Long-term use is suitable for the loosening of the toilet and the ground.

4. The toilet toilet itself is a problem with cracks in the ceramics.

5. Home, home, doctor, and life tips may also be the aging of the internal parts of the water tank 6. There is a problem with the water inlet group or the water outlet group of the toilet.

7. The toilet tank is leaking.

If there is a problem, it needs to be removed and cleaned and replaced, if it is still leaking, it needs to be replaced with a new scoop. If the scoop is fine, see whether the rubber pad at the sink hose interface is aging, and replace it with a new rubber pad in time.

1. The toilet seat is very clean around it, and there are a lot of bacteria left, which is due to the fact that when flushing the toilet, it will cause the stains in the toilet bowl to splash on the toilet seat.

2. After the toilet is used, it needs to be flushed to dispose of the internal excrement, and if there are yellow spots left in the toilet, you must brush it off with a brush, otherwise after a long time, the yellow spots will solidify, and it will become very troublesome to clean up. Also, be sure to close the lid of the toilet bowl when flushing.

3. Around the toilet, it is generally necessary to place a garbage can, so that the waste paper used daily can be thrown into the trash can, which can effectively place the toilet to be blocked. However, we must develop a good habit of cleaning out the bags in the trash can every day, otherwise it is easy to breed bacteria, which will affect the use.

There are 2 ways to solve it:

1. Simple treatment method, clean the seam between the bottom of the toilet and the ground (a complete week), do not pump the toilet within 2 days, let the water at the seam volatilize and dry as much as possible, and mount it to the seam with mildew-proof silicone, after 24 hours, the toilet can be used.

2. Remove the flush toilet whole, clean the bottom and ground of the toilet, and after drying, put the new sealing ring (commonly known as: butter ring) on the water outlet of the toilet, and mark a week of anti-mildew sealant at the bottom of the toilet, and slowly put the water outlet of the toilet into the pit and slowly put it in the installation position, and it can be used normally after one day.

If the toilet leaks at home, you don't need to find someone else to do it yourself.

I won't find someone to fix it, otherwise I may get worse and worse the more I repair.

Glue the bottom of the toilet bowl with sealant.

Expansion: The toilet is also called a toilet, which is a bucket with a lid for urinating and urinating. The invention of the toilet is known as a great invention, which solved the problem of people eating and drinking in and out of Lazar.

Later, it evolved into a flush toilet using the principles of siphon, spiral siphon, and now the latest jet siphon and superspin siphon. There are also people who believe that the flush toilet is the root of all evil because it consumes a lot of domestic water. There are many classifications of toilets, including split and conjoined.

With the development of science and technology, many novel varieties have also appeared.

Classification: According to the matching method of the toilet seat, it can also be divided into ordinary toilet and smart toilet. Smart toilets can also be further divided into automatic set change smart toilets and non-automatic set change toilets, the former includes automatic set change plus flushing, automatic change set with flushing and drying and other different types.

History: The history of the toilet can be traced back to the Han Dynasty, when the toilet was called Huzi, which was dedicated to the emperor, and legend has it that it was made of jade. It was held by eunuchs who served the emperor at any time.

Later, in the Tang Dynasty, because there was a person named Li Hu in the emperor's family, in order to avoid secrecy, he changed the name of Huzi to Beast or Mazi. After that, in the circulation, it evolved into the name of the toilet.

Answer reason 1: The inlet valve does not have a filter. If there are too many impurities in the water, it will cause blockage to the sealing ring in the water inlet valve, so that the water inlet valve will not be closed when it is working. Due to the loose sealing of the joint, the water of the non-disposable formed drain valve flows into the toilet through the overflow pipe through the interface gap under the action of water pressure, resulting in water leakage.

If the sealing ring is not tightly matched with the pipe wall, the lifting inlet valve that can change the height freely will often cause reason 3 and the design of the water tank is not good. For example, when the water tank is discharged, the float and the float rod will affect the normal reset of the flap and cause water leakage. In addition, the float rod is too long, and the float is too large, which causes friction between the water tank wall, affects the free lifting of the float, and leads to seal failure and water leakage.

Reason 4: The float in the tank is not buoyant enough. Nowadays, many toilet tanks are small, so that although water can be saved, the buoyancy of the float is not enough, so that the float can not turn off the inlet valve after being flooded, so it leaks. In this case, the float will need to be changed, but before changing, calculate the pressure required by the float, and then choose what kind of float according to this.

Reason 5: Inferior material. Some manufacturers blindly reduce production costs, and choose inferior materials to cause cracking at the outlet of the water inlet valve and the water inlet pipe itself during injection molding, resulting in sealing failure, and the water in the water tank flows into the toilet through the overflow pipe of the drain valve, resulting in "long flowing water".

It may be that there is a problem with the water inlet group or the water outlet group of the toilet, you open the water tank and see that the water in the water tank is full, and the water flows out of an overflow pipe, it means that the water inlet group is broken, if you hear that the water tank is there a sound of water entering the water for no reason, it is that the water outlet group is broken.

B1 Inspect the leakage part and the cause in detail 2 If it is caused by the aging of the internal parts of the water tank, replace the parts in time 3 If it is a leak at the connection between the toilet bowl and the sewer pipe, you have to reinstall the toilet and re-apply the sealant 4 If the toilet itself has cracks and leakage, you have to replace the toilet with a new one.

C1: Turn off the water first, generally the toilet faucet is equipped with an angle valve can be turned off directly, does not affect other places to take water!

2: Use a wrench to remove the high-pressure hose connected to the toilet!

3: There is a bolt at the junction between the toilet and the high-pressure pipe, and the bolt is to fix the float valve! Remove it with a wrench and remove the float valve from the tank!

4: Just install a new one! It's easy, isn't it?

If the porcelain is broken, then it can't be repaired, and if the accessories in the tank are broken, you can replace it with a new one.

Cause Solution.

a.The water level in the tank exceeds the overflow pipe ACheck whether the water level in the water tank has exceeded the overflow pipe, and if so, adjust the adjusting screws on the water inlet to lower the water level.

b.The chain of the float force rod is too short bCheck that the chain of the float force bar is not too short, and if so, adjust the chain length to the appropriate length.

c.The tank retaining nut is not tightened cThen check whether the water tank fixing nut is tightened, because it may be that the water tank parts are loose.

d.There are fine sand particles blocking the floating spot DCheck the floating area for fine sand blockages, and if so, remove impurities.

e.The float crosses the water mark eCheck that the float in the tank does not exceed the water level, and if so, lower the water level.

f.The drain cover is caught by the tank wall fCheck whether the waterstop lid is caught by the water tank wall and cannot seal the drain port, if.

If yes, please ask the construction staff to adjust the position of the water-stop cover.

g.Whether there is a foreign object adhering to the water-stop surface of the water-stop lever of the water-stop racket cover gCheck whether there is any foreign matter adhering to the water-stop rod of the water-stop racket cover, and if so, remove the foreign matter.

** If there is a water leak, just replace and repair it

Look where the water is leaking, and then prescribe the right medicine.

The water level of the water tank is adjusted too high, and the metal clip next to the blue lid on the ** is pulled down a little.

There are 3 scenarios;

The import and export are loose and tight.

The inlet and outlet erasers are aged or the accessories are damaged and need to be replaced.

Lower the float so that the water is below the overflow.

It depends on what kind of processing you belong to.

This can be adjusted, and there are generally two kinds of toilet water parts now, one is Geberit and the other is ABS engineering plastic, which can adjust the water level, and directly contact the merchant who bought the toilet and ask them to help you adjust it