I want to stick a table tennis racket for 300 800 yuan, and I like to play and pull the ball

Recommended STIGA Red & Black Carbon King (this is an extremely violent baseboard), Forehand Andro Hexer (the oldest piece), Backhand STIGA Ultralight Yino King (the lightest rubber in the world).

or recommended Stiga Rose 5 (5-layer plank, very rich in feel, used by Xu Xin of the national team) Forehand Nitaku's Japanese version of Hurricane III Backhand Andro's Roxon 450 or 500

These two are the boards I use now, and they feel very comfortable, and the following one is more suitable for pulling the curve ball.

For a person who likes to pull the arc circle, never choose a soft board.

Mad King Generation, Forehand Provincial Crazy 3 Backhand Dornick F1

Bottom plate: Yasaka Marin carbon, the speed control is excellent overall, and it is a good choice for those who like to attack and pull the ball.

Forehand: You can use the provincial madness, the forehand of the Chinese people, not much to introduce.

Backhand: Of course, the bus is the best if you have money, but it costs 500 yuan a piece, and the cheaper ones are Sriver El, F1, etc.

Recommend a Stica's CLCR (88-90 grams) Forehand Sticker DW Degree Saving Crazy Backhand with Donic's F 2 I wish you progress.

Recommend the red and black carbon king, forehand provincial madness 3 backhand Donic F1

Stica Namioc

Forehand 39° Provincial Crazy III Potting Large, Backhand can be used Stica Ultralight One Nuo King or Butterfly Sriver EL or Sriver FX

I used Hurricane 3 + Red Double Happiness 6 stars, it feels good!

Stika Nano OC for the base plate and Medium Soft 729 for the forehand.

The red and black carbon king, the forehand is 39 degrees, and the backhand is 729-8

What I said upstairs is right, the finished shot is too bad, you have to play casually and choose the finished shot. Pay attention to the following points when choosing:

1. If it is more than 80 yuan, the performance of the finished product will not be much leap if it exceeds 80 yuan, and it is completely possible to order an assembly shot with a performance that exceeds the finished product for n times online.

2. Don't choose the finished product of Double Happiness, choose Double Happiness is a typical money person who is stupid, the quality of Double Happiness finished products is very poor, the price of Double Happiness products sold in the store is higher than that of other finished products, and the profit is much more, just sell the popularity of a brand!

3. The first thing to look at when choosing a finished product is the rubber, the sponge is delicate and elastic, and the sponge is soft and soft, and the one that is pressed on the bottom plate is pressed. The friction of the rubber surface should be strong and tough, and do not choose the kind that the rubber surface dies, even if it is sticky, it will quickly fade, become smooth, and not resistant to beating.

4. Look at the bottom plate, put it next to your ears, tap the clap surface to listen to the sound of the bottom plate, the purer the sound, the better, the sound is a soft and weak rotten beat. However, the rubber is more important than the bottom plate in the finished shot, and the good rubber is preferred.

The finished product is better than the Milky Way, and the others can be ignored. There are finished butterflies on the market, but they are produced domestically, and the cost performance is very low.

If you want to improve, or have a certain level, you have to form a racket according to the characteristics of your playing style. Generally, it is the Galaxy baseplate +729 Pat Leo Red Double Happiness Rubber. If you want to shoot specifically, you can hi me or ask.

You can buy it online, but I don't understand why I don't want to post one. The sticker is cost-effective, and you can also choose the right way to play the configuration, and the finished shot is generally the bottom plate is not dried or has other defects! If you think about it, you must choose the finished product, you can consider the Galaxy 10b or something.

If you have something, you can ask me again, don't use the finished product of Double Happiness!

What I said upstairs is right, the brand is too bad, if you just learned, it's okay. Moreover, if you don't stick it yourself, 729, the price will not exceed 150, because the finished product can't reach the elasticity or friction you want, and the rubber can't be used for a while. It is recommended that you buy a 729 baseboard, the front hurricane 3 and the reverse 729-2, **, out a little.

If the total price is 150 yuan, you can only consider the domestic bottom plate. Recommend; Galaxy MC-2 and Galaxy U-6 two baseplates. The following is an introduction to the parameters and performance of the base plate.

Galaxy MC-2

Layers: 5 layers.

Weight: 82 grams for straight plates, 86 grams for horizontal plates.

Speed: 10 Control: 6

Performance: Medium and near-stage fast attack type, the overall performance is mediocre but by no means mediocre, which can fully meet the needs of amateur golfers, and is very cost-effective!

2. Layers of microcrystalline: Mix 30-70 micron tiny particles in the wood adhesive to enhance the elasticity of the bottom plate and increase the speed of the bottom plate.

3. Use lighter soft soft wood to reduce the mechanical ** of the bottom plate, so as to improve the control ability of the bottom plate.

Bottom plate 65 80 yuan forehand crazy 3 40 degrees 60 yuan backhand shot Leo CJ8000C 25 yuan.

Total price: 150 yuan.

Galaxy U-6

Speed: Control: 8

Number of layers: 5 layers of pure wood.

Thickness: Weight: 81-87 grams.

Type: Fast Attack Arc Ring Type (Hollow Shock Absorbing Shank).

Performance: The near-table forehand pull has speed, and the medium-strength pull-punch is very stable, but it is unlikely to use it to defeat the enemy in one move, because the performance of eating the ball with full force is not as good as that of medium-power pull. The force is better in borrowing, suitable for the horizontal play near the platform, and the pulling and beating have a certain quality, and it is not easy to borrow the force to push the block.

If a beginner wants to practice playing straight and horizontally, this base plate is a very cost-effective choice. And the board surface is handled very carefully, which relieves the worries of the golfers about sawdust.

Bottom plate 125 yuan forehand friendship 729-8 35 yuan backhand shot Leo CJ8000C 25 yuan.

Total price: 185 yuan.

The bottom plate of the Galaxy CM-2 is 80 yuan, the forehand is 729-5 35 yuan, and the backhand is 729-2 40 yuan.

First, start by choosing the baseplate. Of course, it is best to choose a powerful manufacturer's products, and beginners try to choose pure wood bottom boards, and carbon plates are not recommended.

Second, the choice of rubber and sponge. For beginners, it is recommended to use reverse glue, and usually try to avoid using orthogonal and long glue from the beginning. Because the latter has high requirements for the ball feel and feel of the golfer when used, and the reverse rubber is a popular rubber that is easy to apply.

The sponge can be slightly softer, such as 38-42 degrees, which can maintain good ball control and adapt at the same time.

Third, be careful not to blindly follow the recommendations of others. The principle of simplicity and practicality should be followed as much as possible. The whole auction is matched, and the general price is 120-180 yuan.

Fourth, once you have determined the base plate and rubber to buy, it is best to find a more experienced golfer to help you glue the rubber to the base board, and you want to explore it yourself, if it is sticky, it may be scrapped, and it is also a good opportunity to increase your knowledge by practicing it yourself.

Fifth, it is also important to prepare a good shooting set. It protects your paddle with minimal dust, liquids, or sun exposure.

Bottom plate Galaxy's, 80, both sides of the anti-glue, forehand rubber slap Leo overbearing, 50, backhand slap Leo CJ8000 brisk type, 25.

Galaxy MC-2 forehand: new 729-2 45 degrees, backhand: CJ-8000 C 60 + 35 + 25 = 120, ** on 120 configuration.

I've used MC2 to play well, and it's good to practice basic skills. If, you are not a curved type, you can use the Galaxy E1 - 6mm thick but solid. If the configuration is lighter, use the MC2 backhand to use Skywing.

In the case of a horizontal board, the backhand is used to shoot Leo on both sides of the arc.

Generally, table tennis beginners can use a base plate of 80 to 90 yuan, such as "Shoot Leo" or "Double Happiness" Note! To a separate baseplate, do not complete sets (that is, with rubber), rubber and then sticky, the grade of the rubber generally under normal circumstances the rubber sponge of the forehand should be relatively hard, it is recommended that 60 yuan of "hurricane" set of rubber (sponge hardness to 40, neutral, suitable for beginners) backhand due to the strength of the relative forehand to be small, so the rubber sponge should also be softer, it is recommended to use the "focus 1" set of glue, (hard) ** 60 yuan, this set is also 200 yuan, very suitable for beginners.

The fast-attacking type cannot be used as an arc ring plate, with thin five clamps, large deformation, and the fast-attack will be fluttering and unstable.

For horizontal board fast attack, you can consider Galaxy E1, U2, M6 and MC-3.

The fast attack style is generally recommended to use seven-layer pure wood flooring, which is the first choice for most table tennis enthusiasts.

For example, the most famous STIGA CL in fast break. Because of Liu Guoliang's use and ultra-high cost performance, it has become one of the most common and best-known baseboards in the majority of stadiums.

The U2, M6, and MC-3 I recommend are seven-clamp pure wood bottom plates, and M6 is an imitation of CL. The U2 is a bit heavier and the MC-3 is faster.

The E1 is a five-clip fast arc baseplate with the latest technology of Galaxy, which is very good for playing fast break arc balls. Have you ever watched the Korean team Wu Sang-yin play, his baseboard performance is very similar to that of E1.

The above four base plates are not expensive. Moreover, the forehand can be paired with Hurricane 3 and backhand CJ8000C.

U2 - 80 yuan, E1 - 90 yuan, M6 - 75 yuan, MC-3 - 70 yuan.

Hurricane 3 - 65 70 yuan, CJ8000C - 25 30 yuan.

The forehand can choose 729-08es, and the market price is 50 yuan. It is more suitable for fast attack than Mad 3, and the ball is fast. High stability.

The above set of configurations is no more than 200, but it is enough for the landlord to use it for three or five years.

After the technology is finalized, you can replace the high-end base plate such as the Stiga Yasaka butterfly. At the moment, it's very good to use the galaxy!

If you still don't understand, please continue to ask. Hehe.

Recommended MC-2 Forehand Crazy Three Backhand CJ8000 Two-sided Arc Circle within 200, cost-effective!

Base plate: domestic well-known table tennis equipment Galaxy high imitation international famous brand Stika OC masterpiece rubber: internationally renowned table tennis equipment Double Happiness best-selling products, people see you with Hurricane know that you are more on the road, not blind fighting.

CJ8000 is economical, the name is particularly popular (refer to 3000) All in all, it not only conforms to the concept of low-carbon environmental protection, but also does not lose face.

Love my China, protect my country's land!! The Diaoyu Islands are China's inherent territory!!

Sticking a table tennis racket generally doesn't cost money, provided that you buy the merchant's rubber or bottom plate.

Galaxy MC-2 table tennis baseplate, about 150 yuan; Crazy 3,70 yuan or so. It's only about 300.

Buy it yourself in the **, buy it back and stick it yourself!! Get it within 300 yuan!!

Stikaga inorganic maniac to more than 300.

You can buy a pair in about forty or fifty.

It's about 250 in total.,Galaxy's storage wood shoot 130,Rubber 120 is OK.,I'm also using this configuration.,I've been using it for more than a month.,It's okay.,It's recommended that mad 3 use a 40-degree fast attack effect is better.。

Not necessarily, depending on what brand, I personally think Double Happiness is good, and you can buy a pair in about forty or fifty.

There are as many as they can, and under normal circumstances, three or four pieces can be done.

You can get one for about 500, which is pretty good!

Each one is different, and you have to try it yourself.

Look what glue is up. A few dozen pieces should do.

It depends on the quality of the product you choose... Choose the one that's right for you.

If you buy the land for auction, it must be free, otherwise it will be more than 100.

It's better, it's more affordable.

Generally, you use Galaxy V9 to attack the baseboard, and then use Hurricane if you rubber.

The bottom plate is not necessarily, but if it is about the same, it will be 100, and no matter how bad it is, it will be too bad. Mad 3 wants more than 60, CJ wants 30, right? I don't remember. It's a total of 200 dollars less.

There are many kinds of galaxy, what elasticity do Mad 3 and CJ8000C use? It's not easy to use.

Not necessarily, it depends on what brand.

**No, there are cheap hundreds, and the expensive ones are very expensive.

Mad 3 is a national madness, a provincial madness, or a general madness.

For DIY shooting, the base plate is first selected according to the playing style, technical ability and economic conditions, and then the rubber is selected according to the base plate, and then bonded together to form a beat. According to the type of play, the bottom plate is divided into: near the fast attack, fast arc, arc fast and chipping ball and other four types of baseplate, according to the carbonization or not, the bottom plate is derived from pure wood and carbonization and other baseplates.

It can be said that what kind of economic conditions can choose what kind of base plate and rubber. Relatively speaking, the bottom plate of Friendship, Galaxy, and Paio belongs to the public board with high cost performance, and the price is low; Dak, Adi, Butterfly, Double Happiness Bottom Plate, etc. are more expensive. The **** of 729 sets of rubber is lower, and the ** of red double happiness set of rubber is higher.

It should be emphasized that under the premise of the same price, the hitting effect of DIY rackets is much better than that of finished rackets.

In the bottom plate, the Galaxy bottom plate, good quality and low price. It is recommended to use 729 sets of glue for rubber sets, which are not high, very affordable, and cost-effective.

1.Entry-level configuration, you can learn, master, and consolidate your table tennis skills. Its configuration is that the Galaxy N10 base plate 729 popularizes two sides. Although it is cheap, it is cost-effective and suitable for novices.

2.Kuaihu configuration. Galaxy N4 baseboard, forehand 729-2, backhand CJ8000 (brisk).

3.Higher-level configuration. Galaxy U2 baseplate, forehand 729 - energy storage, backhand CJ8000 (arc fast type).

4. Higher-level configuration. Galaxy MC-2 baseboard, forehand 729-08, backhand 729-05

It is recommended that you go to the big ** purchase, and the store will be responsible for the free glue shooting, and also send the shooting edge and protective film.