What are the ways to wear curtain hooks? How do you wear curtain hooks?

1. Small pleats to wear:

The 4 prongs of the four-tooth hook are respectively aligned with the serial number marked on the cloth belt and inserted into the hole, and the middle is not spaced, and the third fork is worn; There are 3-4 holes between the two hooks.

2. Medium pleating method:

The 4 prongs of the four-tooth hook are respectively inserted into the serial number hole marked on the cloth belt, and the middle interval is 1 hole, and the third fork is worn; There are 4-6 holes between the two hooks, usually 7-8 hooks per meter.

3. Large pleats:

It is recommended to wear according to the four-tooth hook, that is, the 4 prongs of the four-tooth hook are respectively inserted into the serial number 1389 holes on the cloth belt, and the middle interval is 4 holes, and the third fork is worn; There are 6-8 holes between the two hooks. The pleats of the curtain look a bit like a butterfly.

There is also a pillar wearing method, a Korean wearing method, and a South Korean wearing method.

How to wear it. Either way, after the hook is put on to the bottom of the eye, use your fingers to sort out the hook and flick the folds so that they are facing the front, and it will look good.

1. Small pleats to wear:

According to the wear, that is, the 4 prongs of the four-tooth hook are respectively inserted into the serial number 1234 hole marked on the cloth belt, and the middle is not spaced, and the third fork is worn, and the two hooks are separated by 3-4 holes.

2. The traditional way of wearing medium pleats.

According to wearing, that is, the 4 prongs of the four-tooth hook are respectively inserted into the serial number 1245 hole marked on the cloth belt, and the middle interval is 1 hole, and the 3rd fork is worn; There are 4-6 holes between the two hooks, usually 7-8 hooks per meter.

3. South Korean wearing.

Wear one every other or two every other.

This effect is more prominent, but the more the multiplier with the cloth, the hook is put on to the bottom of the cloth belt hole, and then use your fingers to sort out the place where the hook is hit, and the folds are dialed so that it is facing the front. In actual use, the number of pins inserted into the slot can be adjusted.

4. Large pleated wearing method.

It is recommended to wear according to the wear, that is, the 4 prongs of the four-tooth hook are inserted into the serial number 1389 holes on the cloth belt respectively, and the middle interval is 4 holes, and the third fork is worn, and the two hooks are separated by 6-8 holes. The pleats of the curtain look a bit like a butterfly.

How to wear curtain hooks, this little trick can make you a lot lighter, and learn it quickly.

The way to wear the curtain hook is to create a beautiful fold through a fixed number of intervals, so that the curtain is beautiful and generous after hanging, and the specific operation steps are as follows:

1. Lay the back of the curtain facing up.

2. Insert the first claw of the hook into the first slot of the curtain.

3. Interval 3 to 5 slots, and insert the second claw of the hook into the slot.

4. There are 3 to 5 slots between the two hooks.

5. Wear it evenly in turn.

Notes:1. The grooves of the interval should be the same, so that the folds are good-looking.

2. Be light when interspersing and don't puncture the curtains.

When installing curtains, hooks are very important, if they are not installed properly, they will affect the use. What are the ways to wear curtain hooks? PChouse will take you to find out.

1. Small pleats to wear:

The small pleats are more traditional, and the 4 pins are inserted into the serial number on the cloth belt in order, noting that there is no separation between each hanging teeth, and there should be 4 6 holes between the two hooks. By threading the hook until the end is empty, it is enough to adjust it in the front, such as reducing the hollow space in the middle.

2. Medium pleating method:

The middle pleats are roughly the same as the pleats, but it should be noted that when the hook is threaded, the hook should be threaded in the order of the order, note that there is a hole between each hanging tooth that is empty, and the two hooks should be spaced between 4 6 holes and the small pleats are the same.

3. Large pleats:

The large pleat wearing method is a kind of wearing method with relatively large pleats, that is, according to the hollow interspersed, with 4 holes in the middle interval, the third fork is worn; There are 6-8 holes between the two hooks. The pleats of the curtain look a bit like a butterfly.

4. Straight through method.

Everyone's aesthetic is different, if you don't want your curtains to have pleats, then it is recommended that you use the straight thread method, and directly insert a hook into a hole.

There are small pleats and medium pleats for curtain hook wearing.

In the small pleats method, the four pins of the four-tooth hook of the curtain are respectively aligned with the holes marked on the cloth tape. Then there is no need for a gap in the middle, just insert it directly, and then 3 to 4 holes between each hook can be spaced. In the middle pleat method, the 4 prongs of the four-tooth hook are respectively inserted into the holes on the cloth belt, and then 1 hole is spaced in the middle, and 4 to 6 holes are spaced between each hook.

When installing curtain hooks, the distance between the hooks should be as uniform as possible, and calculate it first. Pay attention to rusty hooks, which should be replaced immediately to avoid contaminating the curtain cloth. In practice, the number of pins inserted into the slot can be adjusted, either 3 or 4.

The number of lanyard slots spaced between each two hooks can be adjusted, making it possible to adjust the effective width of the curtain.

How to hang curtains:

When hanging curtains, first determine the number of hanging rings and hooks needed for each side of the curtain, and only by first determining the number of hanging rings can you be fully prepared. In the form of two folds of high-grade Kai in half, the curtains are folded in half, and finally in the folds of the folds are to hang the hanging rings and hooks. Count the folds of this half, which should be less than or equal to the number of hanging ring hooks in your hand.

When the curtains are hung, when the curtains are drawn, draw the curtains in the middle. In this way, the last loop of the curtain will be stuck, so as to ensure that the curtain will not run to the middle. After installing the rods on both sides of the curtain, it is urgent to install the hook in the middle to hook the curtain rod.

If the choice is crooked when choosing the middle position, it will lead to the phenomenon that the curtain is generally not fully opened, and the other side is not fully opened long enough.