-
Anonymous users2024-02-11ipad3 can not connect to the wifi network I believe that many friends will encounter such a situation, ipad can search for wireless wifi signal, when connecting into the password after prompting "unable to join the network", but notebook, mobile phone can be connected normally. No matter how you modify the channel or encryption method, you can't connect. You can only connect if you remove the wifi encryption.
However, it is always insecure to cancel the encryption, and the bandwidth is always consumed by the upstairs and downstairs Internet rubbing. However, the iPad can connect to WiFi normally in other places. Later, I checked the model of the wireless router under it, it is D-Link 524M, and turning off the WMM option can solve it.
Here's how:
1. Enter in the computer IE, enter the user name and password (wireless administrator password), 2. Enter the routing settings, and enter the wireless network settings.
3. Find the wmm option, check Close, and then save. Quit.
4. Connect to the Internet with your iPad.
-
Anonymous users2024-02-10It is recommended to troubleshoot iPad not connecting to the Internet by following the steps below:
2. Refer to the router manual to reset, when the router sets the MAC address and IP address binding, it will affect the iPad to access the Internet.
3. If multiple devices are used to connect to the same router at home, it is recommended to refer to the parameters assigned by the router to set a fixed IP address for each device to avoid IP address conflicts.
4. It is recommended to enter the router, then set the DNS to the local fastest DNS, and then set the iPad to automatically obtain the IP.
6. If it is still not solved, it is recommended to send the mobile phone to Apple for after-sales inspection and maintenance.
-
Anonymous users2024-02-09Other notebooks, mobile phones should be able to do the same. Take a look at the wifi item in the settings.
-
Anonymous users2024-02-08iPad can't join the network may be a problem with the iPad system, you can try to restart the iPad, if not, you can take a try to restore the network settings, with the same operation as follows:
1. First open your iPad, find "Settings" on the main interface and tap it;
2. Under the "Settings" page, select and click "General", swipe up with your finger in the right pane to find "Restore", and click to enter;
3. Under the "Restore" page, find "Reset Network Settings";
4. After clicking "Reset Network Settings", the system will prompt us that this operation will "delete all network settings on iPad and restore to the factory state";
5. After clicking "Restore" in the system prompt box, the system will initialize the network settings. Next, we are instructed to manually add the network again in the wireless LAN settings, enter the router network name and password, the security is generally WPA or WPA2, and reconnect.
-
Anonymous users2024-02-07The ipad can't join the network, it may be that there is a problem with the network module, and after restarting, you can slide to join the network again, and the operation method is as follows:
1. First of all, click on the iPad to open the settings, as shown in the figure below
2. Turn on the Wi-Fi network.
Tap tap to enable WAPI, as shown in the following figure:
3. Open the question below to ask if you want to join the network, and click the exclamation mark after the network, as shown in the following figure:
4. Click to join the network, enter the password and click to join Sun Jula, as shown in the figure below
5. You can successfully join the WiFi network, as shown in the figure below
-
Anonymous users2024-02-06iPad can't join the network, it may be that there is a problem with the network cavity module, you can join the network again after restarting, the operation method is as follows:
1. First of all, click on the iPad to open the settings, as shown in the figure below
2. Turn on the Wi-Fi network.
Click on the WAPI for the shirt calendar, as shown in the figure below
3. Open the question below to ask if you want to join the network, and click the exclamation mark after the network, as shown in the following figure:
4. Click to join the network, enter the password and click to join, as shown in the figure below
5. Wu Taqi can successfully join the wifi network, as shown in the figure below
-
Anonymous users2024-02-05When many users use their iPhones to connect to the WiFi network, they still prompt "unable to join the *** network" even though they have entered the correct password. At this time, you need to clear the network settings of the iPhone to re-identify the base loss network and connect, the following will talk about the detailed steps, 1. Open the iPhone, see the main interface, and select "Settings".
2. Scroll down in the settings interface and find the "General" option.
3 Inside the general options settings, select "Restore."
4 An entry appears that can be restored, select "Reset Network Settings."
5 At this time, a confirmation prompt will appear, confirm and click "Reset Network Settings."
6After that, the iPhone will automatically restart, and after the restart is completed, the network settings will be cleared, and you can reconnect to the wifi network before you can't connect to it.
-
Anonymous users2024-02-04The common causes and solutions of the iPad always prompting the no-nian laughing grinding method to join the network are as follows:
1. Restart your iPad and try to restart your router.
2. For problems with iPad network settings, go to Settings - General - Restore to reset the network settings.
Try. The system prompts you to delete all network settings of your iPad and restore it to its factory state, click Restore.
3. iPad wireless LAN.
Private addresses are enabled.
Go to Settings - Wireless LAN - Next to WiFi I and turn off the private address.
4. Problems with the iPad system. Update your iPad to the latest system.
5. Finally, if you can't connect to the network after trying the above methods, you can try to change a router.
-
Anonymous users2024-02-03The iPad can't join the network, it may be that there is a problem with the network module, you can join the network again after restarting, and the operation method is as follows:
Tool: iPad 4
Operating system: Wu Ta Qi ios
Procedure: Settings.
1. First of all, click on the iPad to open the settings, as shown in the figure below
2. Turn on the wireless LAN and click to enable WAPI, as shown in the figure below
3. Open it below and ask if you want to join the network, and click the exclamation mark after the shirt experience network, as shown in the figure below
4. Click to join the network, enter the password and click to join, as shown in the figure below
5. You can successfully join the WiFi network, as shown in the figure below
-
Anonymous users2024-02-02Summary. iPad says Unable to join the network.
1. Restart your iPad and try to restart your router.
2. If you have any problems with iPad network settings, go to Settings - General - Restore and try to restore network settings.
3. iPad wireless LAN is turned on the private address, go to Settings - Wireless LAN - Wifi next to I, and turn off the private address.
4. Problems with the iPad system. Update your phone to the latest system.
What is the reason why Apple iPad won't join the network.
iPad display Yu Yun belt can not join the network 1, restart the iPad, restart the road vertical reed by the device to try. 2. If you have a problem with the iPad network settings, go to Settings - General - Restore to restore the network settings and try to restore the network settings. 3. iPad wireless LAN is turned on the private address, go to Settings - Wireless LAN - Wifi next to I, and turn off the private address.
4. Problems with the iPad system. Update your phone to the latest system.
Can't do it yet? It may be that there is a problem with the system or hardware, and it is recommended to overhaul it.
Ask about custom messages].
-
Anonymous users2024-02-01ipad no Wu Qi method to join the network, cavity may be a problem with the network module, restart and join the network again, the operation method is as follows:
Tool: iPad 4
Operating System: Programs: Settings.
1. First of all, click on the iPad to open the settings, as shown in the figure below
2. Turn on the wireless LAN and click to enable WAPI, as shown in the figure below
3. Open the question below to ask if you want to join the network, and click the exclamation mark after the network, as shown in the following figure:
4. Click to join the network, enter the password and click to join, as shown in the figure below
5. You can successfully join the WiFi network, as shown in the figure below
It is recommended to buy: or 2 is more reliable.
Because 2: Jobs is now dead, and I think Apple will have a hard time coming up with an iPad 3. >>>More
If you play some large games, it is recommended ipad3, if you only look at the web page or play small games, it is recommended ipa2 because ipad2 is now very cheap, ipad3 is now very cold in sales, but the configuration is better than 2 Don't say **, ipad3 is good. >>>More
On January 6, Beijing time, according to foreign reports, Jeremy Horowitz (Jeremy Horowitz) of the technology iLounge released a series of Twitter messages about the iPad 3 on Thursday. Horowitz noted that Apple will release the iPad 3 in February, and the price of the iPad 2 will drop to $399. >>>More
Don't think about it, if you must buy the old model, please ipad4, because now I estimate that you can't buy a new ipad3, most of them are official refurbished or worse workshop refurbished machines. Some of the iPad4 may be brand new, but be sure to buy it from a regular source. In fact, to be honest, the most **ipad is estimated to be sent in 9 or 10 months, when the iPadAir will be cheaper, the air is still a lot of improvement than 4, the ** bad is not too much, the same want to enter, it is better to wait for the next air, if you can't afford to wait, then 4, and the best national bank, although the Hong Kong bank is cheap, but the national bank implements the domestic three-pack policy, the Hong Kong version is a year, it is already an old machine or a peaceful national bank. >>>More
Here's how to solve it:
1. Turn on "Data Roaming", and you may be able to use a cellular data network from another carrier if it is not within the coverage area of the carrier's network. In Settings, tap Cellular Data and turn on Data Roaming. >>>More