What s the matter with the vivo phone not lighting the screen

If the screen does not turn on when the message comes from vivo phone, you can solve it by the following methods:

2. Enter Settings - Status Bar & Notifications to turn on the software's Allow Notifications to display notifications;

3. Enter the software to check whether the new message reminder is turned off;

4. Some models need to enter Settings - Status Bar and Notifications to turn on notifications to light up the screen.

If the vivo phone has a black screen and cannot be turned on, you can refer to the following methods to solve the problem:

1. Confirm whether the battery of the mobile phone is sufficient, and connect the mobile phone to the power supply to charge for a period of time before trying to turn on the operation;

2. Press and hold the power button for 30 seconds to try to restart the phone;

3. Press and hold the "Power Button" and "Volume + Button" at the same time to enter the recovery mode and select Clear Data to try.

If the mobile phone fails to turn on according to the above methods, you need to go to the local vivo after-sales service center to solve the problem. The address of the after-sales service center can enter the official website of vivo - slide the mouse to the bottom and click "service network query" - select the province and city where it is located.

The possible reasons why the screen of the vivo phone suddenly does not light up are:

Automatic screen lock time "length setting".

The automatic power saving function is turned on.

The screen light is worn out. Loose wire contact.

Hello, the screen of vivo smartphone does not light up, you can solve it by the following methods:

1. Confirm whether the battery of the mobile phone is sufficient, and connect the mobile phone to the power supply to charge for a period of time before trying to turn on the operation.

2. Press and hold the power button (for the full screen, you need to press and hold the "lock screen button" and "volume down button" at the same time) for 30 seconds to restart the phone.

3. Non-full-screen phones can press and hold the "Power Button" and "Volume + Button" at the same time to enter Recovery mode and select Restart. When the phone is powered off, press the power button + volume to enter fastboot mode (upgrade mode), and then select to enter recovery mode through the menu.

1. Click "System Repair Mode".

2. Click "Enter System Repair Mode" to connect the charger to operate.

4. Select available wifi to connect.

Firmware package**Method: Enter the vivo official website - Service - Mobile phone upgrade and click "Learn All" - select the model that needs **firmware upgrade package - resources** - click on the firmware upgrade package**.

Steps:

1. Use a computer browser to search for "enter the vivo official website", 2. Service, 3. Find the phone upgrade and click "Learn all", 4. Select the model (such as: X9S), 5. Resources**, 6. Click on the firmware upgrade package**.

Send it to after-sales maintenance. Ask it here, and you won't fix it either.

1. Check whether it is caused by low battery power.

After charging for 30 minutes with the standard charger and data cable, press the power button to see if there is a charging screen.

No charging screen: Please replace other chargers and data cables that can charge normally to confirm whether the charger and data cable are abnormal. If there is still no charging screen after replacement, it may be a fault of the mobile phone, it is recommended to bring the mobile phone, charger and data cable, and purchase voucher to the customer service center for testing;

There is a charging screen: Please press and hold the power button to try to turn on, if it can't be turned on, please follow the methods below to continue troubleshooting.

2. Confirm whether the hand divination machine is liquid or damaged.

Liquid inlet of the mobile phone: If the mobile phone has been automatically turned off, please do not try to turn it on, use a paper towel to absorb the liquid, and send it to the local vivo customer service center for testing as soon as possible.

Lost mobile phone: If there is instability after the mobile phone is damaged, it is recommended that you send your mobile phone to the local vivo customer service center for testing.

3. Force restart phone attempt:

1. Press and hold the power button to pop up the "Restart" option to turn it off;

2. Slide down at the top of the screen to bring up the shortcut details page twice Swipe up at the bottom of the screen to enter the control center, and click the "Shutdown and Restart" switch;

3. Force restart the phone; (It is recommended to use it when the phone is frozen or stuck).

FunTouch OS and later models: Press and hold the "Power button" + "Volume Down button" at the same time for more than 10 seconds;

Press and hold the top round button for more than 10 seconds to force restart the phone (applicable to NEX 3 NEX 3S);

FunTouch OS previous models: Press and hold the "Power Button" for more than 12 seconds;

Fourth, repair the system.

Enter the recovery mode -- install the system software -- determine the latest version of the network update -- ** the latest version and install it, connect to the available wifi -- ** and install -- restart the upgrade package after it is successfully installed.

5. Bring your mobile phone to the service center for testing.

It is recommended to enter the vivo official website first--my--after-sales service--all services--appointment service, select the province or city where you are located, match it to the service center, and fill in the relevant information to apply for an appointment for maintenance. You can call the customer service center in advance to confirm the relevant matters and understand the working hours to avoid losing precious time.

If the phone screen is not lit, check whether the phone is stuck, you can press and hold the power button to restart the phone, try or charge the phone, and see if it can be turned on normally.

Summary. The possible reasons why the screen of the vivo phone suddenly does not light up are:1Automatic screen lock time "length setting". 2.The automatic power saving function is turned on. 3.The screen light is worn out. 4.Loose wire contact.

The possible reasons why the screen of the vivo phone suddenly does not light up are:1Automatic lock screen time "Mu search length and short set Hu Nai Zheng pants ode to the place". 2.The automatic power saving function is turned on. 3.The screen light is worn out. 4.Loose wire contact.

The solution to the problem that the screen of the vivo mobile phone suddenly does not light up is:1You can try to press and hold the power button for more than 15 seconds to see if the phone can turn on normally.

2.You can press and hold the power button and the volume up button to enter the recovery mode and perform a double-clear operation. 3.

You can press and hold the power button and the volume up button to enter the recovery mode, click to enter the system to clear the hunger repair mode, click **latest version to install, select the wifi with good network speed to connect, wait for the firmware upgrade package** to complete the automatic repair system answer, and click the restart button after the repair is completed to see if it can be used normally. 4.If the above methods still cannot be turned on, it is recommended that you go to the after-sales service center for testing and processing, check at the vivo official service outlets, and then select the province and city where you are located and check the local after-sales service center.

Hello, my phone vivonex2 dual screen version of the phone fell to the ground and the back screen was broken, why didn't it light up.

The vivonex2 phone broke the front screen, causing the phone to go black, so you need to see if the phone can still be turned on when the screen is black. Vivonex mobile phone black screen treatment: 1. Press and hold the power button for 30 seconds to see if the mobile phone can be lit up and scattered.

To confirm whether the black screen is caused by a hardware failure or a software failure, if the phone has no important data, you can suggest to restore the system and try to fix it; 2. When the phone is turned off, press and hold the volume up button and the power button at the same time for 3 to 4 seconds, after the vivo phone logo appears on the phone, release the button to enter recovery mode, press the volume down button to select the system repair mode, and press the ON key to confirm;

3. Press and hold the lock screen button and the volume plus key at the same time in the shutdown state, when the vivo interface appears, release the lock screen key and continue to press and hold the volume plus key to enter recovery mode, press the volume down button to select the data in addition to the closed Tan Li except the car is late, press the open key to confirm, and wait for the interface to jump, then press the volume down button to select and restart the mobile phone and press the open limb key to confirm; 4. If the black screen cannot be opened, it is recommended to go to the after-sales service center to ask a professional to repair it.

What should I do if the screen doesn't light up after it is broken?

Now in the case that the black screen cannot be opened, it is recommended to go to the after-sales service center to ask a professional to repair it.

Summary. Hello, the solution of vivo mobile phone screen can't be locked is as follows: 1. Enter Settings--(Quick & Assist)--Intelligent Somatosensory--Smart Screen Off, confirm whether the "Smart Keep Screen On" is turned on, if it is turned on, it needs to be turned off; 2. Go to Settings - Display & Brightness - Auto Lock Screen and confirm whether the automatic lock screen time is set for too long; 3. Restart your phone to re-lock the screen; 4. Go to Settings - System Management More Settings - Backup & Reset Factory Reset - Restore All Settings.

Reset all settingsThis operation will not delete the data in the phone, it will restore all the settings in the phone, including: the wallpaper set, the unlock style, wifi, the default opening program, etc., and the third-party software logged in the phone also needs to be logged in again, at this time, the normal lock screen can be restored.

Hello, the solution to the problem of not being able to lock the screen on the vivo mobile phone is as follows: 1. Enter Settings--(Quick and Assistive)--Intelligent Somatosensory--Smart Screen Off, confirm whether the "Smart Keep Collapse Spike Bright Screen" is turned on, if it is turned on, it needs to be turned off; 2. Go to Settings - Display & Brightness - Auto Lock Screen and confirm whether the automatic lock screen time is set for too long; 3. Restart your phone to re-lock the screen; 4. Go to Settings -- System Management More Settings -- Backup & Reset Factory Reset -- Restore All Settings. Reset all settingsThis action doesn't delete the data from your phone, it restores all settings from your phone, including:

Set the wallpaper, unlock style, wifi, default opening program, etc., and the third-party software logged in the mobile phone also needs to be re-logged in, and the normal lock screen state can be restored at this time.

5. The mobile phone has turned on the screen function for a long time, which causes the mobile phone to remain on all the time. Solution: Generally, in this case, you can enter the mobile phone settings to adjust it by yourself.

6. The background application of the mobile phone is turned on too much or the temperature of the mobile phone is too high due to the continuous use of the mobile phone for too long, and finally the screen fails. Solution: Leave the phone for a while or restart the phone directly, and then observe the condition of the phone.

Xiangdong Sakura 7、It is a software in the mobile phone that is incompatible with the mobile phone,As a result, the mobile phone has been in a bright state。 Solution: Remove the software that is not compatible with your phone to solve the problem.

I hope mine is helpful to you and I wish you a happy life