-
When the mobile phone is turned on and used, the internal circuit of the machine is working, and there will be a slight alternating current sound. If the noise is too loud, please bring the purchase invoice, repair card and machine to the Samsung service center, and the engineer will check and deal with it.
-
Summary. The solution to the loud current of the mobile phone live broadcast is as follows:
1. Turn on the microphone effect, turn it off and try it.
2. Turn on the volume controller, only turn on the main volume and waveform, and turn off all the others and then use the headphones to listen for any noise.
3. The sound treatment is not good, it may be the current sound of the audio, and the sound of the audio current is generally the small power supply rate wave capacitor, so keep the speaker away from other electrical appliances.
4. It is recommended to replace the external sound card of the mobile phone, which has good compatibility and diversified functions.
5. It may be the internal reason of the sound card, or the problem of the converter.
6. Generally, when using a sound card that requires direct power supply, it will be easy to have current sound, and the mobile phone uses a sound card.
How to solve the loud current of mobile phone live broadcast.
The solution to the loud current of the mobile phone is as follows: 1. Turn on the effect of the microphone, turn it off and try 2. Turn on the volume controller, only turn on the main volume and waveform, and turn off all the others and then use headphones to listen to any noise. 3. The sound treatment is not good, it may be the current sound of coarse sound leakage, and the sound of audio current is generally the power supply rate wave capacitance is small, and the speaker is far away from other electrical appliances.
4. It is recommended to replace the external sound card of the mobile phone, which has good compatibility and diversified functions. 5. It may be the internal reason of the sound card, or the problem of the converter. Tong answer 6, the general use of a sound card that requires direct power supply, it will be easy to appear current sound, mobile phone use sound card.
Hope it can help you dear.
-
Summary. Dear, I'm glad to answer your questions, the reasons and solutions for the current sound when the sound card live cable is plugged in are as follows.
Live current sound, generally from the charger, it is best not to charge at the same time during live broadcasting, including the sound card and mobile phone, be sure to charge, to choose a high-quality original charger. The second situation is that the microphone cable shielding is not good, this can be tested by dialing off the microphone, and the microphone can be replaced after being determined, and the third situation is that the live broadcast connection cable is broken, and when the ground wire of the connection line is bad, there will be current sound.
What's going on with the sound card live cable plugged in with the current sound.
Dear, I'm glad to answer your questions, the reason and solution for the sound card live broadcast cable plugged in with the current sound are as follows: live current sound, generally from the charger, it is best to live broadcast without oak do not charge at the same time, including the sound card and mobile phone, must be charged, to choose a high-quality original charger. The second situation is that the microphone cable shielding is not good, and this can be tested by dialing off the microphone next to the dry banquet, and the microphone can be replaced after being determined, and the third situation is that the live broadcast connection cable is broken, and when the ground wire of the connection line is bad, there will be current sound.
Dear, if my answer is helpful to you, please also give a thumbs up (comment in the lower left corner), look forward to your like, your efforts are very important to me, and your support is also the driving force for my progress. If you feel that my answer is still satisfactory, you can close the void reed and click on my avatar for one-on-one consultation. Finally, I wish you good health and a good mood!
-
If the current sound appears after using it for a period of time, it is usually because the filter has some faults, so that the output current has an AC component, which will have a certain impact on the charging control circuit of the mobile phone, and the current sound begins to increase, in this case, it is recommended to replace the charger. It is usually best to use the original charger to charge the phone.
This answer applies to most of Huawei's phone models.
-
If you charge it, there will definitely be a little electric sound, and it is impossible to have no sound at all, so it is normal to be satisfied.
-
Summary. 1.Software version problems, sometimes such problems will occur in the update of live broadcast software, but they are often solved quickly, pay attention to the update of the software version.
1.Software version problems, sometimes such problems will occur in the update of live broadcast software, but they are often solved quickly, pay attention to the update of the software version.
2.Check the microphone, the headphones, the microphone has the greatest possibility of problems, you can try to replace the headphones, microphone equipment, see if the problem can be solved.
3.There is a problem with the phone's motherboard, and if there is a problem with the phone's motherboard, it can also cause this to happen.
4.If there is a problem with the adapter and sound card, if our mobile phone is equipped with a sound card device, you can try to remove the adapter and sound card first, and then start broadcasting to see if the problem can be solved.
Hello dear, please check one by one and check the problem.
Do you have any other questions, dear
The sound card can be connected to the mobile phone, but pay attention to the interface. >>>More
Method steps.
First of all, let's talk about what is called echo Kamai, that is, when you are connecting with someone, your voice is spoken, and then it is returned to yourself in a delay. (Under normal circumstances, the other party has turned on the accompaniment mixing function, and when your voice enters the other party's computer, it is the same as the background sound of the accompaniment, ** for yourself to listen to). >>>More
Splash screen when charging, jump screen, are caused by too much ripple of the charger, screen display and touch control, are realized by the internal chip in the way of scanning, when the normal scanning signal is interfered with by too strong ripple, it is impossible to achieve normal touch control and display, there will be a splash screen, jump screen. Generally, replacing the charger can solve the problem 90% of the time. If you unplug the charger, or even start it again, it still flashes and jumps, and it basically has to be repaired, either to change the screen or change the chip.
If the mobile phone is not fully charged for a long time, you can troubleshoot it according to the following methods: 1. Make sure to use the original charger and data cable to charge the mobile phone; 2. Replace the original charger and data cable for charging, or replace the socket to try; 3. If there is no poor contact of the interface during charging, you can try to plug and unplug it again; 4. Do not run high-power software (such as games, **, etc.) for a long time when charging; 5. One-click acceleration to clean up the background running program of the mobile phone, restart the mobile phone to try; 6. If you use a mobile power bank with a small output current to charge, the charging time will also be extended, you can replace the power bank with a slightly larger output current to charge. If the problem still cannot be solved, it is recommended that the vivo customer service center comprehensively test and deal with it.
It has something to do with the line.,But you can try to restart the phone.,My own phone was like this once.,Original.,It's good to restart it.。 >>>More