When buying kitchen and bathroom appliances, the toilet is really the top priority, is it better to

When we buy kitchen and bathroom appliances in our daily life, buying a toilet is also a top priority, if you want a low-noise one, choose a siphon. If you want to save a lot of trouble, then choose to go straight to it. Then let's look at their pros and cons.

1. Advantages and disadvantages of siphon type

The siphon toilet flushes with low noise, uses the vacuum principle to dry the water, and then changes the water for storage, which is called a silent toilet. However, when a siphon toilet flushes, the water must be drained before the dirt can be flushed out. Some poor quality toilets need to be washed several times to be clean.

Comparatively, they consume more water and are more prone to clogging.

Second, the advantages and disadvantages of the flush type

Direct flushing toilet flushing pipe is simple, large pipe diameter, short diameter, high flushing intensity,Flushing directly without backing bends makes it easier to flush off larger dirt, and is not easy to cause blockages during the flushing process, so there is no need to store the paper basket in the bathroom. However, the flushing sound of the direct toilet is very loud, because the water storage is small, it is prone to scaling, and the deodorization effect is not as good as that of the siphon toilet.

1. Toilet flushing test

The flush test is an important step in buying a toilet. It is recommended to put a few table tennis balls in the bathroom and rinse them to see if all the table tennis balls can be discharged. Some toilets are prone to splashing when in use, so you should pay attention when buying them.

The reason for the toilet bowl splashing is related to the water seal height of the toilet bowl at the water seal height of the toilet bowl. If you don't want the toilet to splash, you have to pay attention to the general height between 5560mm.

2. Drainage method and pit spacing

Before buying a toilet, it is important to know how the toilet at home drains and between the pits of the toilet. The required error of the distance between the pits cannot exceed 1 time, otherwise the toilet cannot be set. Therefore, this information must be provided to a person skilled in the art so that the toilet purchased at the time of measurement is accurate and the toilet purchased at the time of purchase is incorrect.

After reading the above comparison, I personally feel homeA toilet with a siphon installed will be a little betterWhat do you think?

The siphon toilet is more advanced, beautiful, less noisy, not hanging on the wall, good anti-odor effect, and feels better.

I don't think the difference between the efficacy of the two is too much, one is a little more expensive, the other is cheaper, it's up to you to choose.

Depending on the individual's financial ability, the siphon is more expensive than the straight flush, but the effect of the flush is definitely better.

It still depends on what you like, as the saying goes, it's not as good as your own heart.

The in-line discharge is a strong discharge, which can be flushed with a small amount of water, and the sewage discharge speed is very fast.

It's all good, I haven't chosen this, my parents watched and bought it, I don't worry about it.

My family is straight, I haven't used Hongchong, I don't know if it's good or not, but it's still very good.

The siphon toilet is more advanced, beautiful, low noise, not hanging on the wall, good anti-odor effect, and clean flushing, which is the first choice.

The toilet flushes straight.

The pipe of the direct flush toilet is relatively simple, its pipe is large and the arc is small, and it mainly uses the gravity of water to flush the toilet; And the siphon toilet.

The pipeline is more complicated, the pipeline is relatively small, but the arc is large, and the water consumption will increase in order to ensure the effect of siphoning.

In order to improve the effect of siphoning, ordinary siphon toilets will be equipped with a water replenishment device, but it is easy to block.

Sewage discharge capacity of both

When flushing a flush toilet, its water is concentrated and the flushing speed is fast, and the dirt can be easily discharged. In addition, because of the advantage of large pipes, it is rare for the toilet to become clogged.

As for the siphon toilet, it can flush all the dirt on the inner wall of the toilet, but some large suspended dirt is not so easy to flush. In this comparison, the flush toilet is superior.

The anti-odor effect siphon toilet is better than the direct flush toilet, because the water storage surface of the direct flush toilet is relatively small, which is easy to lead to the phenomenon of scaling on the surface of the toilet, and the anti-odor effect is naturally much worse. Whereas siphon toilets come with their own water seals.

Yes, it has a higher water storage surface, so the anti-odor effect will be better.

The bathroom is the highlight of the decoration, and the toilet is an indispensable sanitary ware for the bathroom, so its purchase is also particularly important. There are many varieties of toilets on the market, so is it better to choose a siphon or a flush toilet? Which one is better for home use?

I'll make up for the evil for you!

Flush toilet.

Flushing system: The pressure of the flush is used to squeeze the filth down.

Advantages: the installation of water pipes is simple, the vortex effect adsorption force is large, the filth can be washed very clean, and it is more water-saving than the siphon type, not easy to clog, and has strong flushing power.

Disadvantages: The sound is loud when flushing, the water pressure is low, and at the same time, because the direct flush type has a backflush, it is easy to form dirt.

Siphon toilets.

Flushing system: uses the suction generated during flushing to suck the filth out of the water bend.

Advantages: The sound is small, and it has an anti-odor effect, the water pressure is large, and the inner wall is clean with stagnant water.

Disadvantages: The water consumption is large, and about 8 liters of water are needed each time, which is more wasteful than the straight attitude wheel punch type. At the same time, due to the small diameter of the drainage pipe, it is easy to block.

If it is a one-way spray, it will not be able to form a whirlpool, and sometimes something with a lot of buoyancy will not be able to wash away. I recommend:

If you have a small apartment, it is recommended to choose a flush toilet, because it occupies a small area, and the sewer pipe in the old house is cast iron, it is also recommended to use the flush type.

Precautions when choosing a toilet:

1. Drainage method: whether it is the lower row or the back row.

2. Determine the distance between the drainage walls (pit distance).

3. When choosing a toilet, it is necessary to observe whether the glaze of the toilet is uniform, whether there is color difference and obvious deformation, how glossy it is, and whether the surface defects (brown eyes, spots, cracks, orange glaze, ripples, spots, dirty) can be strictly controlled. A well-glazed toilet is smooth, detailed, and flawless, and can still be as smooth as new after repeated rinsing. If the glaze quality is not good, it is easy for dirt to hang on the four walls of the toilet.

4. Determine the water consumption, less than or equal to 6 liters of water for the water-saving toilet, the general toilet water storage is adjustable, and the water consumption can be adjusted according to the characteristics of the family.

5. The toilet is divided into split and conjoined.

Split toilets are generally small in size and suitable for bathrooms with small space. One-piece toilets have smooth lines and novel designs, and there are many styles to choose from. 6. Look at the internal drainage connectors.

If the quality of the glands and contents of the connector is poor, the toilet is easy to scale and block, and it is easy to leak. The gasket should be made of rubber or foamed plastic, with relatively large elasticity and good sealing performance.

7. Look at the service. Choose a reputable brand product.

1. Flush toilet

The direct flush type mainly uses the pressure of the flush to squeeze the filth down.

The biggest advantage of the flush toilet is that the water pipe is relatively simple, the vortex effect has a large adsorption force, and it can flush the filth very cleanly. Moreover, it has the characteristics of water saving, no clogging, and strong flushing power. It flushes very cleanly, which is why many people prefer a direct-suction toilet.

Of course, the disadvantage is that the sound is a bit loud and the water pressure is low, which is easier to clog than the jet type. At the same time, because the flush type has a backlash, it is easy to form dirt.

Second, the siphon toilet

Siphon toilets use the suction power generated when flushing to suck dirt out of the bend.

The siphon toilet is not that loud, and the odor prevention effect is also good. It is not easy to clog and has high water pressure. And the inner wall and stagnant water are relatively clean. It can be said that the vast majority of families choose siphon toilets because of its advantages.

The disadvantage is that it requires a lot of water, at least 8 liters of water each time, which is relatively wasteful. At the same time, because the diameter of the drainage pipe is relatively small, it is easy to clog. If it is a one-way jet, it will not be able to form a whirlpool, and sometimes it will not be able to rush down when encountering something with a relatively large buoyant force.

3. Is it better to flush or siphon? 1. If the house is small, it is recommended to choose a direct-flush toilet, which covers a relatively small area.

2. If your home is an old house and the sewer pipe used is cast iron, it is recommended to choose a straight flush type.

3. Families with larger units can choose siphon toilets.

4. If your home is a new house and the sewer pipe used is PVC material, it is recommended to choose a siphon toilet.

Through the above introduction, we have a general understanding of the characteristics and selection methods of flush toilets and siphon toilets. From which we can see that there are no clear advantages and disadvantages of flush toilets and siphon toilets, they each have their own characteristics and advantages and disadvantages, so they are suitable for all kinds of different families, you can use this article as a reference when choosing to buy, according to the specific situation of your own home to choose a suitable toilet for yourself, really play a role in facilitating your own life.

Nowadays, many conjoined toilets are siphon type, which not only has a strong sewage discharge capacity, but also has a small flushing noise and is very silent. Let's take a look at the flush toilet, which uses the large thrust formed by the compressed air, the flushing speed is fast, the punch is large, the sewage is strong, and it is easy to flush away large stolen goods. However, the flush type uses the instantaneous strong kinetic energy of the water flow, so it is noisy when used.

Then let's understand their respective internal structures, the flush toilet flush pipe is not as complex as the siphon toilet, the path is short, so the water consumption is relatively small, and the sewage effect is better. The siphon toilet pipe is longer and shaped like an "S", so it is less noisy, but the sewage is not as fast as the flush toilet, and it is easier to clog.

Flush toilets and siphon toilets have different shapes, so they are suitable for different types of households. If you have a large bathroom area, then you can consider using a siphon toilet, because the "size" of a siphon toilet is "short and fat"; On the other hand, if you have a small toilet area, then it is best to choose a flush toilet, because compared to a siphon toilet, a flush toilet is relatively "thin and tall", and it is the first choice for small households.

Your house is an old house, and the sewer pipe used is cast iron, so you should choose to use a flush type.

If you have the habit of pouring water or throwing sundries into the toilet in your life, you can consider choosing a direct flush, which has a large pipe (generally above 7cm, and the inner diameter of the siphon pipe is above the national standard), which is not easy to cause blockage.

Choose a siphon toilet.

The reason why it can't be washed clean is because the quality of the glaze is not good, the water absorption rate is high, and it is easy to hang dirty. The glaze of the big brand products is good in material selection and high in firing temperature, so the water absorption rate is low, it is not easy to hang dirty, and it can be rinsed clean.

There are several reasons why it is easy to clog: the glaze is of low quality and easy to hang dirty, causing clogging; It is not a full-pipe glazing, and the pipeline is easy to hang dirty; The pipes are small and do not easily wash away dirt. Generally speaking, the pipe of the direct flush type is larger, and the pipe of the siphon is smaller, and some brands of siphon toilets have pipe thickening technology.

The water-saving performance of the water parts is good, there will be no water leakage, and there are double-speed buttons, and there are large and small flushes.

Toilets with poor sewage discharge capacity and poor glaze quality will have poor pipes and need to be flushed many times after being used for a long time.

The water-saving effect of the flush toilet is better than that of the siphon type, and in addition, the flush toilet can put a water bottle into the water tank to achieve more water saving, but the siphon type cannot do this.

Good after-sales: will be responsible for on-site installation and maintenance, regularly consult the customer's use, and better yet, regular door-to-door cleaning.

During the warranty period, the product can be replaced if there is a problem;

Problems caused by product quality will be dealt with after sales.

The toilet water parts can be replaced if there are non-human problems;

After the warranty period, the product accessories need to be replaced, and only the cost will be charged; If there is a problem with the customer's product, it will be dealt with immediately after sale.

The question is very professional.

From the perspective of flushing methods, toilets can be roughly divided into: flush type (ordinary flush) and siphon type. The difference between the siphon type and the ordinary flushing method is that it flushes the water while achieving the siphon effect through a special curved pipe to quickly discharge the dirt.

The siphon type is divided into flush type, vortex type, jet type, etc.

The siphon vortex type and jet type are equipped with a special water inlet channel, and the water from the tank flows into the toilet under the water level, so as to eliminate the noise generated by the air impact in the pipe and the water falling when the water enters the tank. That is, the "silent toilet" currently being implemented on the market. The siphon jet type has a unique water nozzle that can spray a strong stream of water for better flushing results.

I think the siphon type is better, the sound is quieter, and the coarse stool can't be washed away is a few cases, maybe the water-saving water tank is used, the water volume is a little smaller, you can adjust the water volume of the water tank a little bigger.

It is recommended to choose the jet siphon type. There are many brands, and the first-line brands are concentrated in Dongchen, Fashion Meijia, and Bomei. Second-tier brands Bomei, Vientiane, Yingbin Road (I haven't been to this place).