How to install computer speakers, how to install audio on desktop computers?

The speakers of the computer are directly connected with the wire, and it can be completed on the computer.

How to modify a good speaker to lead the speaker? If you modify it to something else through that setting, you can also do it.

How to install the computer impression, is to carry out the position of his speaker and the internal conditions. Ample.

How to install computer speakers? The computer's audio is directly connected to the computer.

You just tell us what you both like, and if you say this thing, you can pretend to be this thing, very, very much.

The computer speaker only needs to connect the cable to the socket behind the computer host and connect the speaker to use,The key is not to plug in the wrong wire。

For their computer audio, if you want to connect, you can see the relevant manual to connect it.

To think about how to install this, you should check some of the introductions about the speaker.

In this case, you can connect the stuffing to the computer first, and then open it after connecting it.

Well, you can ask the customer service of the seller you are selling and ask him how to install it, or go to a cheap place to buy.

Shijiazhuang on the line,There's no difference,Computer speakers are still a relatively relaxed thing。

1 How to install desktop computer speakers.

Desktop computers have always been set to have no external speakers, if you want to listen to songs, you have to plug in headphones or install speakers yourself, so how to install desktop computer speakers? Let's take a look!

1.First of all, it depends on what type of speaker you buy, the common types of speakers on the market are: paired satellite speakers, single speakers, surround sound speakers, subwoofers with pairs of speakers, etc., while desktop computers are installed smoothly with relatively simple subwoofers with pairs of speakers.

2.Find the speaker socket on your computer, there will be speakers (audio) interfaces on the front and back motherboards of the general computer, and the general audio is connected to the green round holes, and the front and back panels of the general desktop are available, and the laptop basically has only one jack connected to the headphones, but the structure of different computers will be slightly different, if you are prompted to install the sound card first, it means that your computer is relatively old-fashioned, and you can re-find the relevant information when installing the sound card.

3.Recognize the function of the jack on the panel of the desktop computer, the general computer will use different colors to identify the speaker interface, which will make it easier for you to distinguish which jack different plugs should be installed on, the basic meaning is as follows:

a.Green: Main speaker or headphones.

b.Pink: Microphone.

c.Silver: Sideshower.

d.Orange: Center channel speaker or subwoofer.

e.Black: Rear speakers.

4.The last step is to check the instructions for the speaker you need to install, figure out which function jack the corresponding cable should be connected to, and then install them one by one, if the space behind the main unit is tight, the plug may need to be twisted slightly to ensure that all the plugs are plugged in tightly.

After installing the speaker,Of course, turn on the power for testing,**After it is correct,We can use our keen perception to adjust the middle and high tones,At this time, you can turn on a song or a paragraph**,Then slowly turn up the volume,Until you reach the volume you think is appropriate。 Once you're sure your speakers are working properly, go online and find a channel testing tool to see if each speaker is connected to the correct location.

Here's how to install the speaker on your computer:

1. First of all, connect the audio and the computer, generally the external audio will have the first round of 2 wires, a headset and a microphone, only 2 are connected correctly to the Zao letter can, the general hole is on the left side of the computer.

2. Click the Start menu to open the control panel.

3. Select the large icon, find and open the "Sound" option on the page.

4. Click on the audio manager below, the "Set as Default Rock Value" option, and then click OK to complete the setting.

Tips for using the computer:

1. CTRL+N: Create a new file.

2. Ctrl+O: Open the Open File dialog box.

3. CTRL+P: Open the Print dialog box.

4. Ctrl+S: Save the file of the current operation.

5. Ctrl+X: Cut the selected item to the clipboard.

6. CTRL+W: Close the current web page.

7. Ctrl+Insert or Ctrl+C: Copy the selected item to the clipboard.

8. Shift+Insert or Ctrl+V: Paste the contents of the clipboard to the current location.

10. Alt+Shift+Backspace Redo the operation that was undone in the previous step. <>

The active speaker is the same whether it is connected to a computer or other audio sources, such as a computer, plug one end of the audio cable into the computer audio output (green socket), and the other end into the audio input socket on the active speaker, connect the power supply on the speaker, and turn on the switch to use.

Hello, connect the computer audio cable, then plug in the power supply, plug the audio cable into the motherboard, and set the volume on the computer.

Desktop computer speakers are easy to plug in, and you just plug your plug into the back of the computer case.