Home desktop computer with WIFI, how to connect home desktop computer to wifi

To make sure that the router is not broken, the main line input and output computer interfaces cannot be connected incorrectly, and then set it up according to the instructions.

Restore the router to its factory default settings first, and then set it step by step according to the manual.

Here's how to do it:Operating Equipment: Dell laptops.

Operating system: win10

Operating Procedure: Network Function.

1. Find the network on the computer, right-click and select the attribute to enter, as shown in the following figure and return:

2. After the page jumps, enter the network properties interface, and click to change the adapter settings, as shown in the following figure

3. At this time, you can see the disabled wifi, right-click and select enable, as shown in the figure below

4. When its wifi is enabled, you can see the wifi function and network, as shown in the following figure:

Turn on the network connection, and you can choose to enter the password to connect.

Ask what is pocket wifi

Aren't all computers wired?

For example, wifi ports and the like.

The question line is plugged in at both ends.,One end is poor computer host.,The other end is how to install the wireless network installation Little sister.,Please inform.。

Question: I have already plugged in the box I used before.

And then how to do it

Wireless router is a very important kind of network embedded branch hardware device, presumably we are also very familiar with it in life, its main function is to be able to create a wireless network on the basis of wired broadband network, so that other electronic devices can access the network through wireless connection. However, unlike other portable devices such as laptops, desktops generally do not have a wireless network card installed after purchase, so they cannot connect to a wireless network to achieve network access without doing anything.

Connect using a wired method.

In the absence of other external devices, we can use existing devices to connect to the wired network of the desktop, and the way to connect to the wired network for the desktop is actually very simple, first of all, we only need to prepare an additional network cable. Turn on the router first, then plug in its power cord, if the router's indicator starts to light up, it means that the router is ready to work.

Next, we take out the main network cable, connect one port of this network cable to the main mesh hole or network modem on the wall, and wait until its network is sure to be connected, and then connect the other section of the network cable to the main port of the router. Generally, routers will have five ports, and the color of one port is different from the color of the other ports, and the port with a different color is the main port. We bend the sensitive network cable to connect to it, and the router will become a transit sharing device for the network.

Now we just need to shout to connect one end of the other network cable to any of the secondary ports on the router, and the other end to connect the mesh of the desktop. At this point, our desktops are able to access the Internet through the router's wired network.