How to install a computer? How do I install a computer?

One. Partition. A partition is a part of a hard disk that is built as a separate storage area, which is divided into a primary partition and an extended partition.

The primary partition is used to store the boot record of the operating system (the first sector of the primary partition) and the operating system files; Enrichment partitions are typically used to store data and applications.

1. fdisk partition method:

2. DM partitioning method:

2. Hard disk formatting.

Tutorial. 3. Set up boot from CD.

1.Go to the Award BIOS settings.

Standard CMOS Setup --Boot Sequence --CD

BIOS settings.

boot (boot device settings) --boot device priority --1st boot device---cd

BIOS settings.

Advanced BIOS Features --Hard Disk Boot Priority: -First Boot Device --CD

Tutorial. Fourth, the system installation.

Operating system installation details**.

5. Install the driver.

There's nothing in it, so don't buy it.

You can rest assured that it is the only interface, so don't try too hard.

If you make a mistake, the BIOS will alarm.

It's actually quite simple! Just figure it out for yourself.

If you don't touch it, why buy it?? ~

Computers are already very important ...... our daily livesStudying, working, playing games and relaxing, everything is inseparable from the computer.

For many people, computers are a tool ......The computer they bought was a brand machine, and when they got it, it was a complete machine; When they use the computer, they apply the software and hardware installed on the computer, and once there is a problem with the computer, they will find after-sales service to solve the ......

However, there are many people who use computers that are assembled ,......Specifically, it is a ...... that you assemble yourself

For these people, their use of computers is obviously more sophisticated than the previous group of people......

However, for these people, the process of using computers also requires more ...... their own abilities

When it comes to installing computers, they need to have more advanced skills and abilities.

Installing a computer is divided into two categories: hardware installation and software installation.

Specifically, the steps to install the computer are as follows:

1. Install the CPU and memory on the motherboard.

Since the CPU and memory need to be installed in the slots of the motherboard, it will be more laborious to install these accessories if the motherboard is installed in the chassis, so the installation of these two accessories should be ...... before the motherboard is installed in the chassis

It is important to note that ......The installation of the CPU heatsink should also be completed ......If the memory also has a heatsink, it should also be installed in place.

2. Put the power supply into the chassis.

3. Put the motherboard into the chassis.

4. Install the graphics card and other boards in place.

This step is divided into two steps:

1. Install the board on the corresponding slot of the motherboard.

2. The baffle of the board should be fixed at the corresponding position of the chassis.

5. Install hard disks, optical drives and other equipment into the chassis.

If the hard disk is an interface hard disk, you can install it together with the CPU and memory in the first step.

6. Wiring ......Connect the power cable and signal cable ......

In this way, the hardware installation of the computer is complete.

As for software installation, it is to install the Windows operating system, as well as install the application software ......There's nothing more to say......Direct installation prompts to install and ......

Here's how to install your computer:

Tools Raw materials: chassis, power supply, motherboard, CPU, CPU fan, hard disk, memory, mouse and keyboard and other peripherals, small screwdriver.

1. Disassemble the chassis, put the power supply away, and fix it with screws.

2. Clamp the baffle and press it on all sides. Some cases have pre-fixed bezels, so this step can be ignored.

3. Put the motherboard, pay attention to the hole on the left baffle, and align it with the screw hole below, and screw on the motherboard to fix the motherboard.

4. Press the hoop of the CPU card holder to open the card base, put down a gap on both sides, and put the gap against the two points protruding from the card base to put the CPU.

5. Restore the CPU card holder, if there is silica gel, it is best to bury a little on the CPU.

6. Install the CPU cooling fan, align the four feet with the four holes around the CPU card base, card it, and plug in the power supply of the fan.

7. Plug in the memory module and make sure the buckle cards on both sides are in place. If it is a dual memory module, note that its brand, model, frequency, etc. are all the same.

8. Put the hard disk in the card slot and fix it with screws.

9. Connect the line of the motherboard and the hard disk, and observe the shape of the cable and the shape of the hardware interface. There are four small Weiqiao interfaces on the right side of the motherboard that are connected to the power switch, reset key and light, and there is a mark interface function next to the interface, and the head of the four small wires also has the function of marking this line, and you can connect the corresponding line according to the mark.

10. If you have an independent graphics card, plug in the independent graphics card, if not, ignore this step, cover the outermost cover, screw it, and complete the assembly of the host.