My computer hard drive is broken, what should I do, can I fix it?

It can be repaired, but the cost will be high.

It depends on where your hard drive is broken, whether there are too many bad sectors or the movement is not spinning.

If there is useful data to pour out, it will be higher.

Maintenance is required in a dust-free environment.

I advise you that if you don't have important documents or stuff, it's better not to fix them.

Because now a new 160G ST hard drive is only 270 yuan, I'm talking about the purchase price, and the selling price should be around 300.

Can be repaired, as long as it is not too serious, you can use the general "hard disk repair tool" software to get it, and search a lot on the Internet.

If the hard disk board is broken, it can be repaired, and it is more expensive.

If your hard drive has a small capacity, there is no need to repair it.

If there is a bad belt, you can shield it with a tool.

However, the repaired ones are more reassuring than the second-hand ones.

Now the second-hand hard disk is only 100 for 80g

160g 150

New 100g 200

160g 300

Seagate 250G hard disk 16M cache 300 yuan ATA11 300M transfer speed per second is enough for you.

If the board is broken and can be fixed, if there is a da da da sound in the hard drive, then it is not done.

How to recover data when hard drive is broken? Hi Format Data Recovery Master is a powerful, simple interface, and simple to operate data recovery software. It supports the recovery of hard disk files deleted by mistake, disk formatted by mistake, memory card data deleted by mistake, files emptied by mistake, and hard disk files after the hard disk partition disappeared.

Some netizens asked if the hard drive could be repaired if it was broken? In fact, it depends on the degree of badness, if there are some small problems that we can solve by ourselves, then what should we do? How can it be fixed? If you don't understand, follow me to read the following articles!

Method 1: Fix serious problems

1. The more common laptop hard disk damage may be caused by the damage of the disk header information when it is not turned off. If the 0 message is corrupted, a low bar is sufficient. For example, we use DM software for low blocks.

2. After starting DM, the default situation is that it cannot be low-level, and you need to open the advanced menu to execute low-level. In the main interface of DM, press "Alt+M" to switch to the advanced menu, and select the "(M)aintenance options" command in the menu to enter the advanced menu.

3. Then select the "(u)tilities" item to enter the low-level formatting interface.

4. Then DM will display a list of found hard disks, select the hard disk you want to operate, and press enter. This step is extremely important, and you must not make the wrong choice. If you only have one hard drive, just press enter.

5. After selecting the hard disk, then select "Low Level Format" to perform a low-level format.

6. At this time, a warning window will pop up, press "Alt+C" to confirm and continue.

7. After confirmation, a window will pop up for you to confirm again, select "yes".

8. After confirmation, the low-level format operation of the hard disk will begin, and there will be a detailed percentage progress display.

9. It takes a long time to operate in a low grid, so it is recommended to do it before going to bed, and let it perform automatically when you sleep.

10. In addition, many notebook hard disks are broken, and they can't be used to install the system at all, so don't be discouraged at this time, because the notebook hard disk is very small, so you can buy a mobile hard disk enclosure and use it as a mobile hard disk.

Method 2: Fix common problems

1. The common phenomenon of hard disk failure is that it is easy to blue screen when booting or running, but it can still enter the system. This problem is generally relatively easy to fix, mainly because of the system partition problem. We open the DOS command prompt window, type in the command "chkdsk c:."

f r x" to force a fix.

What to do if your laptop hard drive is broken? How to fix laptop hard drive is broken?

2. Since it is to repair the system partition, you need to restart the computer to repair it.

3. Some small problems can also be successfully repaired with some repair software. Here we recommend you to try DiskGenius first. To avoid false positives, we recommend that you first execute "Check for partition table errors" in the Tools menu.

4. If there is no repair, execute the "Bad Sector Detection and Repair" function in the "Hard Disk" menu.

5. If there is a problem with the hard disk during the boot process, it does not need to be detected and repaired here, otherwise it will take a long time. Once you've set it up, you're ready to "start detection" and "try to fix".

6. No matter how serious the problem is, you can use more specialized tools to detect it, and it would be best if it could be fixed.