How to remove ice from the refrigerator, how to de ice the refrigerator

Unplug the main, put a basin of warm water at 35 degrees Celsius in the freezer, and close the refrigerator door! When it's all melted, wipe it off with a cotton cloth!

First turn off the power of the refrigerator, then pull out the drawers in the refrigerator freezer in turn, wipe it with water to dry, it is best to put a small basin of warm water in the freezer, and then close the refrigerator door, after a few minutes, the ice in the freezer will quickly melt away, after all the ice is melted, wipe the freezer clean and dry, and you can continue to use electricity.

The easiest and most effective way is to turn off the power switch, then open the refrigerator door, let the ice melt, and if you want to hurry, you can put a basin of hot water.

When the contents are used for about the same time, unplug the power for about 10 hours, and then use a shovel to shovel it down easily, which is what most of the people on my side do.

Unplug the power supply, open the refrigerator door, and after about ten minutes, gently shovel the ice from the edge with a relatively thin knife, and the whole piece will be detached from the refrigerator. (No brute force is required).

Disconnect the power switch, then open the refrigerator door and let him melt slowly.

First remove the power supply, and then use a rag to dry the water, or you can use a sponge to absorb the water inside.

When the power is disconnected, it will melt on its own, so you can use a hair dryer to heat it up quickly.

Unplug the refrigerator, take a basin of hot water and put it in the refrigerator, close the door, after ten or twenty minutes, open the basic ice and turn into water.

Unplug the refrigerator, take out all the stored food, empty it and put a basin of hot water in the refrigerator room, close the refrigerator door, the hot water needs to be replaced every ten minutes, and clean up the inside after the ice cubes in the refrigerator room are fused.

Freezer is a kind of storage for all kinds of food that needs to be frozen, professional storage tools, so that food or other items to keep cold cabinet or small room, with ice machine to freeze the cabinet or box with refrigeration device storage box, is widely used by various industries and families. The freezer refrigeration system consists of 4 basic parts, namely the compressor, the condenser, the throttling part, and the evaporator.

The original work is as follows: (low temperature and low pressure) refrigerant (gas) Compressor (liquefied) liquid refrigerant (high temperature and high pressure) Radiator (heat from the surface of the refrigerator) Liquid refrigerant (low temperature and high pressure) Capillary The evaporator (copper tube around the inner wall of the box) in the refrigerator is gasified, that is, it is heat absorbed, and the temperature in the refrigerator will drop (gasification) Refrigerant (low temperature and low pressure) Compressor.

1. All 1, automatic de-icing.

The method of automatic de-icing is mainly to disconnect the power supply of the refrigerator, take out the refrigerated and frozen food in the refrigerator at the same time, and then put a towel with good water absorption at the bottom of the refrigerator, and then open the refrigerator. At room temperature, the ice in the refrigerator will naturally melt and fall off, and when the ice in the refrigerator falls off, the ice will be removed, and finally the water in the sink at the bottom of the refrigerator will be cleaned up, and the process of refrigerator de-icing will be completed.

2. Blow the wind and de-ice.

Using a hair dryer is also a great way to de-ice. When de-icing the refrigerator, it is also necessary to disconnect the power supply of the refrigerator, remove the refrigerated or frozen food, and then plug in the power of the hair dryer. When using a blow dryer to de-ice, it is best to use a small setting and wipe with a towel while blowing, and the ice in the refrigerator will be cleaned after a while.

The speed of air blowing de-icing is much faster than the automatic de-icing of refrigerators, but automatic de-icing of refrigerators does not need to be carried out manually.

3. Hot water de-icing.

To use hot water to de-ice, you must first disconnect the power of the refrigerator and remove the food from the refrigerator at the same time. After putting a few bowls of hot water in the refrigerator, you will find that the ice in the refrigerator will gradually begin to fall off after standing for a few minutes, and wait until the ice in the refrigerator is completely off to remove the ice in time, and at the same time clean the sink at the bottom of the refrigerator.

4. After each time after the ice in the refrigerator, use a towel to dry the freezer compartment of the refrigerator, and at the same time apply a layer of vegetable oil on the inner wall around the refrigerator, and wait until the next frost, because the inner wall of the refrigerator is attached to the vegetable oil, the suction between the frost and the inner wall decreases, so that the ice can be easily peeled off the refrigerator.

5. Before placing food in the refrigerator, glue a layer of plastic film on the inner wall of the refrigerator, and wait until the next time you defrost, you only need to take out the food in the refrigerator and tear off the plastic film on the inner wall of the refrigerator to remove the ice.

Refrigerator defrost (ice):

1. Unplug the refrigerator power, a more advanced refrigerator may have a switch on the panel, just turn it off civilly, turn off the switch first, and then unplug the power.

2. Open the refrigerated door, take out all the drawers, and clean the drawers.

3. Use a wet soft towel to wipe the place with thin frost repeatedly, or you can use the de-icing shovel equipped with the refrigerator to wipe the frost off and dry the water in the refrigerator, the purpose of this is to speed up the defrosting speed and avoid the food from spoiling due to defrosting. Rubbing the thick frost several times will speed up the melting of the frost. Do not use sharp objects to force defrost.

4. After the frost is melted, wipe the freezer with a soft cloth.

5. Turn on the power of the refrigerator, wait for the temperature to almost reach the set temperature, and then move the food from the refrigerator to the freezer.

Precautions: 1. Do not open the door of the refrigerator room during the defrosting process.

2. When cleaning the drawer of the refrigerator, try not to use detergent, because the refrigerator is relatively closed, and the smell of detergent is not easy to dissipate.

3. Be sure to wipe the freezer clean after frosting, if there are water droplets left, it will soon turn into frost.

Some refrigerators have automatic defrost and ice functions, and if they don't, they manually defrost or ice. The method is to turn off the power of the refrigerator so that it melts slowly.

Buy a lemon and put it in the fridge to deodorize.

Pull the plug and wait for the ice cubes to melt away, and wipe with a dry towel.

Refrigerator defrost quickly.

Step 1: Turn off the power in the refrigerator and take out the drawers and the food inside. Never take something to knock on the frost, as this will cause damage to the refrigerator.

Step 2: Prepare a dry towel and a larger container. Place a dry towel on the bottom layer of the refrigerator, place the container and pour an appropriate amount of boiling water (it must be freshly boiled hot water) into it, then close the refrigerator door and wait for about 10 minutes.

Step 3: After 10 minutes, open the refrigerator door and you will find that the thick frost has all fallen off automatically, and then just wipe the water in the refrigerator with a dry towel.

Principle: High temperature water vapor is produced by the evaporation of hot water, which accelerates the melting of frost. As long as the refrigerator door is closed, the ice can be melted without dead ends, which is an efficient defrosting method that saves time and effort.

Hello everyone, this is a small jingle of life, the refrigerator at home has been used for a long time, and a thick layer of frost will form on it. In this way, the freezer and refrigeration effect of the refrigerator will get worse and worse, and the refrigerator will also consume better electricity.

First, we unplug the refrigerator, we open the refrigerator and take out the compartment inside. Now let's take a closer look at the refrigerator compartment, which is covered with thick frost. At this time, we must not hit with a sharp object, which can easily damage the refrigerator.

At this time, we only need to prepare a towel to spread on the bottom layer of the refrigerator. After preparing a container and pouring freshly boiled water into the container, the water now emits a lot of water vapor, which can help the frost melt quickly. We close the door of the refrigerator and let it sit for ten minutes so that the heat of the water does not come out and helps the frost melt quickly.

Ten minutes later, we opened the refrigerator again to see that the hot water had cooled. The frost on it has melted. And the ice is all falling.

Then we took the water out. Use the towel underneath to clean the water and ice from the refrigerator. Finally, put the compartment on, plug in the power supply and use it normally.

It only takes ten minutes to clean the frost with this method, and it is recommended that you clean it every other month. If you have better suggestions and ideas, please leave a message below to share with you, or you can share this ****, which can help more people, and if you want to know more practical and interesting life tips, click on **** below to see you in the next issue.

First of all, take out the drawer in the freezer, clean and wipe it clean, and temporarily put the food in the freezer into a crisper bag or crisper box, and preferably put it in the refrigerator for temporary storage.

The second is to use an electric fan to blow into the freezer to speed up the melting of the frost.

Or pour a few small basins of hot water into the freezer to speed up the melting of the frost.

When the frost starts to melt, you can also use a hair dryer to blow on the thicker ice at the door frame to speed it up.

After the frost is thoroughly cleaned, wipe it clean with a dry rag, and install and reset the drawer before powering on the machine.