How to remove ice from the fridge 5

First, disconnect the power of the refrigerator and take out the food in the box. Then, depending on the size of the freezer, put one or two aluminum lunch boxes with boiling water and put them in the freezer; After a few minutes, the frost on the wall of the freezer begins to fall off in one piece (for those that have not yet fallen off, you can use your hand to pull it off). If there is no metal evaporation plate on the top of the freezer, the lunch box containing boiling water should be covered to prevent the plastic inner wall from deforming due to the sudden increase in temperature at low temperatures. With this method, it is much less time-consuming than heating and defrosting on its own in a power outage.

Be careful not to hit the frost layer with a wooden rod or metal device to prevent accidental hitting the ring evaporator and causing unnecessary trouble.

Disconnect the refrigerator from power first. After that, remove the contents of the refrigerator. Insert absorbent towels in the box and let them melt naturally (open the refrigerator door).Do not use an ice shovel or a hard shovel. Because of the excessive force, it will cause a lot of vibration, which will cause damage to the circuit board and fluorinated pipe behind the box.

If you want the ice to melt faster, you can use an electric fan to blow the ice inside the box until the ice melts.

There are several ways to do this:1Use the de-icing blade that comes with the refrigerator to shovel 2

Blow with an electric fan 3You can sprinkle salt on top of the ice, because salt can enhance the melting of the ice, but be sure to wipe all the water clean after melting, because the water will be mixed with salt water, and if you don't wipe it clean, it will rust the refrigerator. (The premise is to turn off the power to the refrigerator).

Turn off the power, open the refrigerator door, and let the ice melt into water.

Unplug the power, open the refrigerator door, and the ice melts into water and flows out. Do not forcibly de-ice with hard objects.

Use the de-icing blade that comes with the refrigerator to shovel it off If you want to clean it thoroughly, turn off the power and wait for it to melt and dry

Unplug the power and melt the ice with hot water (or break it with something).

This can be done with the help of an electric fan.

Blow hard to speed up the flow of air.

Taking Haier refrigerator as an example, the removal steps are as follows:

1. Unplug the refrigerator first to ensure safety.

2. Take out all the trays and things in the refrigerator.

3. You can see a thick layer of ice inside the refrigerator.

4. In particular, it is necessary to check the frosting of the copper tube in the freezer.

5. Use a fan to blow the cream off the inside of the refrigerator first and wait for it to melt.

6. Wait for the ice cubes and frost in the refrigerator to melt, then clean up the stagnant water and dry it with a rag.

Take Haier refrigerator as an example, the operation steps are as follows:

1. Before defrosting the refrigerator, unplug the power supply.

2. Then remove the tray of the refrigerator from the refrigerator.

3. Then check the frosting in the fresh-keeping layer and freezer.

4. In particular, it is necessary to check the frosting of the copper tube in the freezer.

5. If there is already thick frost in the freezer, you can use a fan to aim at the refrigerator to increase air flow and make the frost of the refrigerator melt quickly.

6. After the ice and frost in the refrigerator melt, it is necessary to clean up the stagnant water in time.

7. After the frost in the freezer melts, there will be some water droplets in the refrigerator, which need to be removed.

Disconnect the power of the refrigerator, then take out the refrigerated and frozen food in the refrigerator, then we can put a towel at the bottom of the refrigerator, and then open the door of the refrigerator, so that the ice in the refrigerator will automatically melt and fall off at room temperature. We just need to wait for a while before removing the fallen ice. After the refrigerator is removed, clean the remaining water in the refrigerator.

Perform a blow de-icing.

First of all, we need to disconnect the power supply of the refrigerator, take out the refrigerated and frozen food in the refrigerator, plug in the hair dryer, adjust the hair dryer to the smallest gear, and wipe it with a towel while blowing, so that it will not take long for the ice in the refrigerator to be quickly removed.

After disconnecting the power of the refrigerator and taking out the food in the refrigerator, put a few bowls of hot water in the refrigerator, so that the ice cubes will slowly fall off after a few minutes, and we only need to clean up the ice cubes that have fallen off.

1) Adjust the temperature compensation to 0 first, then turn off the refrigerator (if there is no temperature compensation, it will be turned off directly), and unplug the power supply. Take out all the contents of the freezer layer and the drawer, let the frost melt naturally, wipe it dry with a rag, and then reset.

2) Clear the contents of the refrigerator, use a hair dryer to slowly blow the ice, and attach a towel to absorb water at the bottom of the refrigerator. After cleaning all the ice you have, it is best to wipe it with a clean towel dipped in venom and then wipe it off with water. At the same time, be careful not to block the small holes for drainage.

Then, check and clean the sink at the bottom of the refrigerator, if there is water in it, it is usually very dirty. Finally, put the contents of the refrigerator back and remember to wipe the condensation in the air. In this way, it is not easy to frost again.

Similarly, don't have water on the outside of the packaging of things that you usually put in the refrigerator.

3) There are high tricks in refrigerator defrostingSome refrigerators need to be defrosted, and manual refrigerator defrosting is time-consuming and laborious, and the defrosting effect is not good. Here's a defrosting trick for you. According to the size of the refrigerator compartment, cut a slightly thicker piece of plastic film and stick it to the frosted wall of the refrigerator compartment without using any glue.

If the ice is thick, it should be de-iced in time, first cut off the power supply, open the freezer door, take out the food, and clean it up after it melts naturally. It can also be cleaned with special cleaning tools, but not with metal products to avoid damaging the pipeline, or you can add a glass of boiling water to speed up the melting speed.

First of all, unplug the socket, clean up the contents of the refrigerator, then find an iron basin and pour hot water, close the refrigerator door, open the refrigerator door after about 20 minutes, and the ice will fall off as soon as you touch it,,。

Turn off the power, remove the contents of the refrigerator, put a small basin of boiling water in it, close the refrigerator door, and wait for half an hour before cleaning. Gently pat it and it will fall.

If the refrigerator has been used for a long time, it is inevitable that there will be more or less problems, such as what should I do if the refrigerator freezes? Let's talk about it in detail now:

Method 1:Melts naturally.

If the ice in the refrigerator is very thick, you can unplug the power cord of the refrigerator, and then open the door of the refrigerator to take out the food inside, so that the ice in the freezer compartment of the refrigerator can be naturally melted under natural conditions.

Method 2:Unclog the drain to melt naturally.

There is also a possibility that when we use the refrigerator, the drain in its freezer is blocked, which is easy to cause poor drainage, then too much moisture will freeze, at this time we should check it clearly, if it is, it is necessary to dredge its drain, and then pull out the power of the refrigerator, and then open the door, which will also melt under natural conditions.

Method 3:Hot water de-icing.

First of all, you need to pull out the power cord of the refrigerator and take out your food, at this time, you can take a bowl with a bowl of hot water, put it in the refrigerator, remember to close the refrigerator door, you can put a newspaper or towel at the bottom of the refrigerator, so that the ice inside will melt quickly.

Tips:

If you can't handle it yourself, find a professional to do it to avoid more damage.

It took a long time for the refrigerator to remember to clean it once.

After a long time, the refrigerator was always covered with thick frost.

Every time you clean the refrigerator, the head is big.

It's a knife, it's a shovel, it's a screw knife, and the refrigerator is still broken.

How do you quickly remove thick ice from your fridge?

Teach you a way

Step 1: First unplug the refrigerator and cut off the power to ensure safe operation.

Step 2: Take out all the food in the fridge and clean the fridge.

Step 3: This is the point, put a few bowls of hot water in the refrigerator (about 60, it is best to put a towel with good water absorption at the bottom of the refrigerator), and after about a few minutes, the ice cubes in the refrigerator will melt and fall off in large quantities!

Then clean the ice cubes and melted ice water from the refrigerator, and wipe the inside of the refrigerator with a towel. This way the refrigerator will be cleaned

Here is another method, if your refrigerator is so frozen that you can't even open the door, you can use a hair dryer to blow the gap around the refrigerator door, let it melt faster and then open the refrigerator door, and then use the hot air of the hair dryer to accelerate the melting of the ice inside the refrigerator and clean it up

Step 4: Apply a layer of vegetable oil to the inner wall around the refrigerator, and when the next frost is formed, the suction between the frost and the refrigerator wall will be greatly reduced due to the attachment of the refrigerator wall containing oil, so it will not take much effort to easily peel off the ice cubes.

You can also put a layer of plastic film on the wall of the refrigerator that is a little thicker than the plastic wrap, and when you clean the frost in the refrigerator, tear off the frost along the plastic film and it will come out.

Isn't this much faster than you usually do to clean up the ice?

And there are tips for cleaning up, and every time you clean the refrigerator in the future, it becomes very simple

Direct cooling refrigerator freezer defrosting method:

First of all, cut off the power of the refrigerator, temporarily put the food in the freezer drawer into the refrigerator or insulated box, take out the drawer, clean it, dry it and let it cool.

To speed up the melting of frost in the freezer, the following methods can be employed:

One is to use an electric fan to blow on the freezer;

The second is to pour a few small basins of hot water into the freezer.

When the frost starts to melt, you can also use a hair dryer to blow the thicker frost on the door frame to speed up the melting. Then use a non-metallic spatula to remove the frost that is beginning to melt, preferably with a rag to wipe it clean.

1. Hot towel compress.

Hot towels are a relatively easy way to apply ice, and you can use warm wipes to wipe the inside of the refrigerator to accelerate the melting of ice cubes, but because the temperature is low, remember to wear gloves when de-icing.

2. Spray hot water.

When you find that the refrigerator at home cannot complete the self-de-icing, and the ice layer is thick, you can use a sprayer to spray hot water to eliminate, because the sprayer can spray to the small parts, so no matter how thick the ice is, this method can be quickly removed.

3. Hair dryer blowing.

A hair dryer at home can be used not only to dry your hair, but also to remove ice from the fridge. Since it takes a long time for the refrigerator to defrost each time, if you open the freezer compartment of the refrigerator and use a hair dryer to blow hot air directly into it, the ice can be removed quickly.

Fourth, let go of the water to de-ice.

If you find that the refrigerator at home needs to melt ice, you can put a basin of boiling water in the freezer and use the heat of the boiling water to melt the hanging cream. After 10 to 20 minutes, the frost in the freezer begins to melt and fall off, and if the frost is too thick, you can change to another basin of boiling water. However, it should be noted that if there is no metal evaporation plate on the top of the freezer compartment of the refrigerator, the basin containing boiling water should be covered with a lid to avoid deformation of the plastic inner wall at low temperatures.

5. Adjust the temperature.

The general temperature is adjusted between 3 and 4 degrees Celsius, and ice is not easy to appear. If the temperature is not within this range, this phenomenon may occur. If it's not a matter of temperature, check the food stored in the refrigerator to see if it's too hot.

Avoid placing food in the refrigerator that is too hot, as the hot air can cause a lot of condensation and indirectly produce this phenomenon. If these two problems are ruled out, then it is possible that the thermostat is damaged.

Follow these steps:

Turn off the power first, transfer all the food in the refrigerator, and leave the refrigerator door open to let it thaw naturally.

Be careful to put a few towels under the refrigerator to prevent the thawing water from running all over the floor.

The ice should be loose in about 2 hours, use a towel to sweep out the ice and frost in the refrigerator, some are relatively strong, use an ice shovel to get it, don't use a hard shovel to prevent the evaporator from being broken, then it will be troublesome.

After cleaning up, wipe it with a dry towel, and then let it dry for a while, all of which are almost dry, close the refrigerator door, and then turn on the electricity to refrigerate, run for about 2 hours, and put the food into the refrigerator after the temperature has all dropped down.