Recently it is being renovated, how to choose polished tiles

1. Check the flatness.

Overlap two polished tiles of the same variety, align the four corners, rotate one of them, and the polished tiles that are easy to rotate are of poor quality, and vice versa. This method cannot be used to inspect antique bricks. Antique bricks are characterized by arbitrary changes in surface color and pattern, and the surface can be uneven.

2. Look at the water absorption.

The size of the water absorption rate is an important indicator of the quality of polished tiles. Pour a cup of water on the back of the brick, the faster the water disappears, the higher the water absorption, the looser the texture, the weaker the strength, and vice versa.

3. Look at the finish.

This is an important indicator to detect the quality of polished tiles. Clean the protective wax on the surface of the polished tile with a soft cloth or reagent, put it in a light or sunlight, and view it at an oblique angle of 45 degrees, the brighter the surface, the better.

4. Listen to the sound to distinguish between good and bad.

Use the five fingers of one hand apart and the other hand to tap the surface of the polished tile. The sound of good polished bricks with high density is relatively crisp and bright; Poorer polished tiles have low density and a dull sound.

Hope it helps.

More shades to match, it is best to have a designer to help with it.

First of all, look at the polished tile, the first surface is bright, and the minimum brightness must be above 65 degrees (there are many ultra-bright products now, it does not reach this brightness, and it is marked with wax, you can ask clearly when you buy it).

The second point: the embryo bottom is relatively white, and the porcelain sand particles are small.

The third: the heavier one in your hand.

The fourth point: the diagonal is equal, the straight angle is good, and the flatness is good.

1. Observation. When buying polished tiles, first of all, you can observe whether the surface of the tiles is bright and pure in a place with good light, and whether there are pinholes, scratches, color differences and other defects.

2. Listening method. Secondly, you can also listen to the sound, tap the tile with your hand, if the sound is crisp, pleasant, and has the feeling of metal sound and closed quality, it means that the density is high, the sintering is good, and it is a high-quality product; On the contrary, if the voice is hoarse, there may be cracks in the brick, then it means that the degree of porcelain is low, and the quality may not be up to par.

3. Measurement method. When buying ceramic tiles, you may wish to use the measurement method to check the quality of the tiles, and you can use a ruler to measure the four sides and diagonals of the tiles to see whether its length and flatness of the brick surface are better than the national standard.

4. Weighing method. You can also experience its weight with your hands, weigh it by hand, and feel heavy brick hardness, ***.

5. Water testing method. Finally, when buying polished tiles, you can also use experiments to prove its quality, pour a small glass of water on the back of the brick, if the water disappears faster, the higher the water absorption. If the water seepage behind the polished tile is very slow, it means that the water absorption rate is smaller, the internal quality is good, and the product durability is good.

If it is 800*800 specifications of floor tiles, 30 yuan per piece is not expensive or the cheapest, you can buy the brand's first-class products at this price, and you can also buy the first-class products of small brands! You can buy semi-glazed or full-glazed floor tiles, and you can buy polished tiles or antique tiles, and those small-sized floor tiles *800) needless to say.

Although this is said with a bit of jealousy and hatred, it is indeed the same truth. And Brother Yu I think that in addition to looking at the style and quality of ceramic tiles, you also need to refer to **, expensive tiles have their expensive reason, but cheap tiles are also acceptable!

It's like Brother Yu's more than 20 yuan a piece of floor tiles, when I chose it, I liked the color and price moderate, and the effect after paving was not much different from what I expected, and more importantly, there was not much left that could be revealed on the furniture (Brother Yu's house is a small apartment).

Before, I also wanted to choose a polished tile that cost more than ten or twenty yuan a piece, but I felt that the style of the polished tile was too monotonous and finally gave up. What do you think of the floor tiles like the one pictured above? To be honest, it's really 26 yuan for an 800*800 glazed brick (acquaintance price).

In my decoration work, I have been exposed to a lot of floor tiles at various prices, and there are advantages and disadvantages in each price of ceramic tiles. In fact, many times it is to buy a taste and show identity!

There is also a certain reason for the master to recommend the use of polished tiles, and it can be said that it is very wise to choose polished tiles at this price, because the polished tiles at this price are definitely big brands. The same price level is not the same for glazed tiles, and it is basically impossible for a big brand to throw glazed bricks for 30 yuan a piece! And those who are lower than this can only choose some unknown brand products like Brother Yu!

Like the light gray glazed brick in the picture above, the owner said that it would cost more than 80 pieces, and it is not clear what brand it is, so as not to say that Brother Yu is advertising.

This kind of floor tiles that cost nearly hundreds of dollars have the same color difference and flatness deviation, not that our paving technology is not up to par, it is indeed the problem of the floor tiles themselves! However, the owner said that he liked this high-end feeling, and felt that the floor tiles of twenty or thirty dollars were unreasonable, and we could only echo and praise them!

Good. However, due to the brighter color of the polished brick, it has a good decorative effect, and it is hard and wear-resistant, so it is very popular with consumers, but the biggest disadvantage of the polished tile is that it is easy to get dirty, which is mainly because the polished tile will leave concave and convex pores when making, and these pores will hide dirt and dirt, resulting in the surface is easy to infiltrate pollutants.

Overall, it's still relatively good. Its advantages are: non-slip

It is very important for the safety and non-slip of floor tiles, especially for families with elderly and children, who pay more attention to the anti-slip effect of tiles. The surface of the polished tile is smooth and bright, many consumers think that its anti-slip effect is poor, in case of sprinkling water increases the potential safety hazards, so they avoid it, so they have to choose the "light restrained" matte tile. And the brick body is thin and lightweight:

Due to the low strength, natural stone has a large processing thickness and is bulky, which increases the load weight of the floor building, forms a potential threat, increases the cost, and increases the difficulty of transportation and paving.

The master recommends choosing a tile for 30 yuan.

Cause. First, the master recommends ceramic tiles, may have experience in the purchase of ceramic tiles, because the master is mainly pasted ceramic tiles every day, and is still familiar with ceramic tiles, 30 yuan a tile, it can be affirmed that ** is not high, each material has its cost plus freight, ceramic tiles are roughly divided into two kinds, wall tiles and floor tiles, wall tiles are thin and small, also called porcelain tiles, the material is very different from floor tiles, ** relatively cheaper.

Cause. Second, the subject did not say that the wall bricks or floor tiles, for example, if it is a wall brick, then it must be high, and the wall bricks are very close to the people, because the wall tiles are small in size and have no thickness, that is to say, the density is not very good, so its specifications will be smaller, and the weight will be lighter, this is the difference between wall tiles and floor tiles, **It is also different, and the wall tiles will be done for more than ten yuan per square meter.

What are the tips for buying polished tiles? There are many materials that need to be used in the decoration of the house, among which ceramic tiles are the most common one, which cannot be missing. Now there are many types of ceramic tiles on the market, the most popular of which is polished tiles, the product has good luster, great decorative effect, and is very wear-resistant, it is a good decoration material, but now there are so many brands of polished tiles, what kind of products are good?

What is a polished tile?

Polished brick, also known as full-body brick, is a kind of tile with high surface gloss that has been polished, generally used in kitchens, bathrooms and other places, and polished bricks are light, not easy to deform, good anti-slip performance, and are good decoration materials. However, polished tiles will leave pores when they are made, so they are easily polluted, and their anti-fouling performance is relatively poor.

What are the tips for buying polished tiles?

1. Scratching: Because the biggest advantage of polished tiles is that they are hard and should not be damaged, even if they encounter scratches, there will be no obvious traces, so when purchasing polished tiles, we can scratch the tiles to see if the product will have obvious traces and whether the powder will be scattered.

2. Measurement: Measurement is also a very effective method when purchasing polished tiles, we can measure the side length of polished tiles, generally speaking, good polished tiles are produced in accordance with specifications, and the difference is relatively small, so that the paving effect is good.

3. Anti-fouling performance: Because the anti-fouling ability of polished tiles is relatively poor, good polished tiles need to be treated with special anti-fouling when they are made, so anti-fouling is also the standard for choosing tiles when purchasing tiles. If there are stains on the surface, it means that the product quality is not good, if the surface is still shiny as new, it means that the product has good stain resistance and is easy to clean and take care of.

4. Percussion: Percussion is an important skill to judge the quality of ceramic tile products, and it is suitable for all kinds of ceramic tile purchases. When purchasing, we can gently tap the polished tiles, if the sound is crisper, it means that the internal quality of the product is better, if there is a deep feeling, it means that there is a problem with the quality.

5. Observation: When purchasing polished tiles, we can judge the quality of the product by observing the surface of the tiles, and the gloss of good polished tiles is generally better. Therefore, when purchasing, we can see whether the product has color difference, whether there is deformation and other problems, and at the same time, we should also pay attention to whether the back of the product is white and whether the color is uniform.

Summary: The above content is about the polishing tile purchase skills of the relevant content introduced, I hope to be able to help you, want to know more knowledge, you can continue ****, thank you for your support to us.

How to choose two aspects of polished tiles

The choice of brand

1. The packaging of regular manufacturers is clearly marked with the factory name, factory address, trademark, specification, grade, color number, work number, etc., and there are clear instructions for use and implementation standards.

2. The bottom of the polished brick from the regular manufacturer has a clear trademark or logo.

3. When you choose the brand, you find that there is no lack of the above-mentioned celebration mark or the mark is incomplete, then please be cautious, if necessary, you can go to the local industry and commerce or quality supervision department for identification or example.

The choice of quality

When you unpack, please press the following visual inspection, sound identification, measurement, test shop and other defects.

1. Visual inspection: mainly to see whether the surface of the polished tile is shiny and bright, whether there are scratches, color spots, leakage and polishing, missing edges, missing feet and other defects.

2. Appreciation: Knock on the tile [Foshan tile net"fstaoci. com"If the sound is crisp, the degree of porcelain is high, the wear resistance is strong, the flexural strength is high, the water absorption rate is low, and it is not easy to be polluted, if the sound is dumb, the porcelain degree is low (and even cracks), the wear resistance is poor, the flexural strength is low, the water absorption rate is high, and it is very easy to be polluted.

3. Ruler: The deviation of the edge length of the polished brick is 1mm, and the deviation of the foot line is 500 500 products, 600 600 products 2mm, 800 800 products, if this standard is exceeded, it will have a greater impact on your decorative effect.

4. Trial paving: In the same specification and the same color number, randomly sample a number of products with different work numbers and different dates on the ground, stand 3 meters away and observe carefully to check whether the color difference of the product is obvious, whether the gap between bricks and bricks is straight, and whether the chamfering is uniform.

You can get it for free

In modern home decoration, people like to use polished tiles to decorate the floor or wall because it is not only hard and wear-resistant, but also easy to clean. But now there are many types of polished tiles, how should we buy them? And what should I pay attention to?

Let's take a look.

1. What are the key points to pay attention to when buying polished tiles?

1. Look. When purchasing polished tiles, you should first look at the color of its surface to see whether it is smooth and traceless, and also check that there is a very color difference or lack of edges and corners. At the same time, the trembling luck along the edge of the brick to see the hall quickly passed, to see if its edge is straight, if there is a bending phenomenon, it is recommended that the beam should not be purchased.

2. Knock. When buying polished tiles, you can also tap the tiles with your hands and listen to its sound, if the sound is very crisp, it means that the porcelain degree and density of the tiles are high, and the quality is relatively good. If the sound sounds dull, it means that the density and porcelain of the tile are not good, and the quality is also problematic.

3. Drops. When purchasing polished tiles, you also need to look at the anti-fouling performance of polished tiles, when purchasing, you can drop a drop of ink on it, generally speaking, better polished tiles, it is easy to clean up. However, inferior polished tiles are difficult to clean.

4. Quantity. When purchasing polished tiles, you should also measure the side length of the tile, the higher the accuracy, the better the effect after paving, you can use a tape measure to measure the size of each tile.

5. Stroke. When buying polished tiles, you should also scratch the tile to judge its hardness. Generally, it can be judged from the edges and corners of the fragments of the tile, if the fragment is relatively dense, it means that the quality of the tile is good.

On the contrary, it means that the quality of its tiles is not qualified.

Well, the above is the relevant introduction to the key points of attention for the purchase of polished tiles, do you understand it clearly? I hope that the results of the collation can provide some help to people when buying polished tiles.