How does a built in refrigerator fit into a cabinet? What are the pros and cons?

You can measure the size of the built-in refrigerator first, and then reserve the size, and wait until the refrigerator is put into the home before building the cabinet, so that it can be decorated into a whole. The advantage is that the decoration effect is better, it looks more natural, and the refrigerator can be hidden, which can make the space look more smooth. It is that when there is a problem, it cannot be repaired well, the maintenance process is more difficult, and the refrigerator cannot be replaced at will.

Built-in refrigerator is not just a simple embedding of the refrigerator into the whole cabinet to achieve an integrated home environment in the kitchen, beautiful and space-saving Built-in refrigerator not only has the function of a general refrigerator, but also can be integrated with the style of the cabinet. However, the construction of the embedded system is difficult, the wall is not beautiful after installation, and the embedded audio itself is technically difficult, because the cabinet volume is limited, and it also involves problems such as airflow optimization.

The built-in refrigerator should be the same color as the cabinet when decorating, and the size is about the same, so that it will be more convenient; Its advantage is that it is beautiful and space-saving, which will make the space of the whole room larger, and the disadvantage is that it is very high, it will be about 30% higher than an ordinary refrigerator.

For people with a relatively small house, they will choose built-in refrigerators in the process of decoration, which can effectively save space with the decoration of cabinets, and the whole is also very beautiful, but there will also be certain drawbacks. If you want to decorate it as a built-in refrigerator, you must reserve 20 30 cm of space on both sides of the refrigerator, which can also make the refrigerator better heat dissipated. The construction difficulty of the built-in refrigerator is also relatively large, after the installation, the beauty of the wall may also be affected, and the volume and reserved area of the refrigerator must be calculated before the decoration, it is recommended to avoid the situation that the size is not suitable.

Many families will choose to put the refrigerator and the cabinet on a horizontal plane, if the refrigerator is a front heat dissipation hole, there is no need to leave some heat dissipation space on both sides. <>

In the process of customization, the selection of the panel is also very particular, this decoration method can facilitate the follow-up cleaning, but the built-in refrigerator is also relatively expensive, you must choose according to your budget. Built-in refrigerators have a lot of advantages, can save more space, is also very fashionable and beautiful, many built-in refrigerators are made of aluminum or stainless steel, in the process of subsequent use will have a longer life, and it is also relatively easy to clean, with a high appearance. <>

Built-in refrigerators are also very environmentally friendly, and they also have a good energy-saving effect in the process of use, which can reduce power consumption. Defrosting in the process of use is also very headache, but built-in refrigerators can effectively solve this problem, because most of the built-in refrigerators belong to air-cooled refrigerators, and there will be additional functions, which is more convenient and practical. <>

No matter what decoration method is pros and cons, the biggest disadvantage of the built-in refrigerator is the heat dissipation function, which is not particularly ideal, if the refrigerator does not get good heat dissipation in the process of work, it will be prone to some failures, and the service life will be reduced.

The heat dissipation of the refrigerator is a very important thing, if we embed the refrigerator in the wall, this will affect the heat dissipation of the refrigerator, after all, it is surrounded by walls, the heat dissipation port of the built-in refrigerator is below, but the heat dissipation port of the non-embedded refrigerator is behind, which will make the heat of the refrigerator can not be volatilized, so that the refrigerator stays in such a space for a long time, which will have a particularly great impact on its life.

A built-in refrigerator is a type of refrigerator that can fit into a sealed space on three sides. Generally speaking, the built-in refrigerator will not be embedded in the solid wall, so as to avoid affecting the normal operation of the heat dissipation function on the back, it is generally embedded in the cabinet, and the position where the refrigerator is required cannot be installed with the back panel. At the same time, in order to meet the requirements for heat dissipation of refrigerators, the embedded cabinets must reserve space for heat dissipation at the top and feet of the refrigerator.

The refrigerator is one of the most common household appliances, its function is to keep food fresh, but also to freeze food, in order to ensure the perfect freshness of food. Nowadays, many families are small, and it is difficult to divide a separate area in the kitchen to place the refrigerator, so designing a built-in cabinet for the refrigerator is a good choice. Today I want to introduce how to design the built-in cabinet of the refrigerator, let's find out together!

1. Built-in cabinet space design of refrigerators.

I believe that the kitchen area of many families is very small, most of them are made into a narrow shape, and there are a lot of general kitchen and bathroom appliances and appliances. I think the built-in design is a good design, so that you can use the space of a large refrigerator without taking up extra space, which is very practical.

Second, the style of the refrigerator built-in cabinet.

Nowadays, the house is mainly a small apartment, so it is recommended that you can use the design of the T-shaped kitchen cabinet to divide the kitchen into two with a limited area, and some large household appliances can also be embedded in the cabinet, which is also very low to ensure the spaciousness of the space.

3. The design concept of refrigerator built-in cabinet.

The refrigerator is embedded in the wine cabinet, the decoration style of the homemade wine cabinet is natural and distinct, the design of the chandelier brings a bright and natural feeling to the whole space, the white plaster ceiling is matched with the bright wall lamps around the overall match is very elegant, the decoration style of the restaurant is modern, it is an open restaurant decoration drawing, the main color is warm, the design of the background wall of the restaurant is made of flax-colored gypsum board, the color of the border is made of white solid wood, and the design of the floor is made of white marble. It presents a sense of simplicity, the light brown dining table with the white decoration of the sofa brings you the enjoyment of beauty when you dine on the stove, the design of the display cabinet is very natural, full of petty bourgeoisie, and the floor is a light beige style design.

The above is how to design the built-in cabinet of the refrigerator shared for you, I hope it will help you.

It is necessary to pay attention to the size of the cabinet, but also to the problems of all aspects of the cabinet, to pay attention to the decoration, to pay attention to the layout of the cabinet in all aspects, to install the gas stove in a well-ventilated kitchen, and to pay attention to the individual design of all aspects.

Care should be taken not to make the design dusty, and you should also pay attention to the overall style, and also pay attention to the overall home style. Attention should also be paid to good storage. And also pay attention to the practicality of the design.

Be sure to choose home appliances in advance, and then do a good job of waterways and circuits, but also pay attention to the heat resistance of the cabinet, choose the right tire, and try to choose one that is not easy to deform.

Not so good.

The built-in refrigerator relies on forced heat exchange, that is, there is a fan motor to force the condensation and heat dissipation side of the refrigerator, and a certain amount of operating noise will be generated during its working process.

And the market demand for built-in refrigerator products is not large.

Summary. Kiss.

May I ask the masters of fully built-in refrigerators, refrigerators and customized doors are equipped with refrigerators or custom cabinets?

Kiss. You go into details.

It is a customized cabinet and a fully built-in refrigerator that is installed in order to customize the door of the cabinet installed on the refrigerator.

What you mean is who installed these two appliances in your home.

Is that what it means?

No, it's my customized cabinet, and the fully built-in refrigerator I bought is a wooden door that needs to be customized on the refrigerator door.

The refrigerator is installed as a refrigerator, and the customized wooden door is the refrigerator.

Looking for this place to make wooden doors?

Because this wooden door is mounted on the refrigerator.

Is it like this? No.

You can't see the refrigerator when you install the cabinet door.

At present, most refrigerators need to leave space for heat dissipation, generally five centimeters on the left and right, and ten centimeters at the back. This space cannot be changed, because the refrigerator is refrigerated, once his space is not done well, it will affect our refrigeration and its life in the later stage.

The use of the refrigerator will involve the problem of cleaning and maintenance, so it is best to add a base to the refrigerator to be built-in to facilitate movement. The heat dissipation space of the refrigerator is 5cm (minimum), and the total size should be the width of the refrigerator plus the heat dissipation width, the height of the refrigerator plus the height of the base plus the height of the baffle of the heat dissipation equipment. Ordinary refrigerators should measure the size of each part in detail, especially pay attention to whether the position of the compressor is convex, and at the same time pay attention to whether the reserved power supply position is reasonable.

Whether it is a customized cabinet or a whole cabinet according to your needs, when buying a refrigerator, you should measure the dimensions of each position of the refrigerator in detail, including whether the position of the compressor is convex or other size issues involved, coordinate the work of both parties, and check whether the reserved socket position is reasonable. Generally, the reserved space of the refrigerator is not less than 5cm, and it is necessary to pay attention to whether the heat dissipation space behind is sufficient if it is parallel to the cabinet door, and the total size should be the width of the refrigerator plus the heat dissipation width, the height of the refrigerator plus the height of the base, and the height of the baffle of the heat dissipation equipment.

First of all, there is no problem with heat dissipation, and the distance of 10 cm is enough! That's what I do at home, but there will be other problems! It is a problem of life and death, if it is stuck, the gap of 5 or 6 cm here will be very difficult to take care of (basically impossible), it is better to leave it wider, or put the refrigerator alone (if there is space).

The wider space can usually be placed on a large cutting board, rolling pin, etc., the key is to take care of it, now every time I mop the floor, it is painful to see this corner!

Many household appliances need to be cleaned regularly or repaired in case of failure, and when installing a refrigerator, you should consider whether the refrigerator is convenient for mopping, scrubbing or maintenance. The built-in refrigerator needs to be far away from the sink and the gas stove, the sink is about 1 meter, the size of the gas stove is also about one meter, the operating table between the sink and the gas stove is different due to various reasons such as room type, the width of the refrigerator is generally about 600cm, so the length of the metering cabinet is about about 1 meter.

You can make cabinets on both sides, place the refrigerator in the middle, make the countertop tighter, open on the side panel of the cabinet, let the refrigerator dissipate heat, this can also be, it depends on the size of your kitchen space Of course, this method should be optimistic about the refrigerator in advance, and cooperate with the cabinet manufacturer!

1. Pay attention to the size of the refrigerator and the cabinet, if the cabinet has been purchased, then when purchasing the refrigerator, you need to go to the store to measure the size of each position of the refrigerator in detail, and whether the position of the compressor is convex.

2. There should be no less than 5cm of space around the refrigerator to dissipate heat, basically parallel to the cabinet door, the heat dissipation space behind is sufficient, the shell is the width of the refrigerator plus the heat dissipation width, the height is the height of the refrigerator plus the height of the base plus the height of the heat dissipation equipment baffle, the base here is necessary to make a base with wheels for the refrigerator.

3. Whether it is convenient to enter and exit, in order to facilitate the cleaning of the refrigerator in the future, it should also be considered that the refrigerator can be easily taken out when installing the refrigerator, so that the refrigerator can be pulled out at any time when scrubbing.

4. The installation of the fan is generally installed on the back and the board sealed on the top of the hole, and it is rare to install the cabinet door outside the refrigerator door.

Generally, the heat dissipation of the built-in refrigerator will be concentrated at the top, bottom and back plate, so don't stick the board at the back, leave a certain amount of heat dissipation space around (especially the space distance between the left and right sides, generally 10 cm to 15 cm), remember not to leave too small or directly attached to the wall, otherwise the refrigerator is placed like this, on the one hand, it will increase the working time of the refrigerator, on the other hand, it will also lead to poor heat dissipation of the refrigerator itself, and the refrigeration effect will be seriously worse. Shorten the life of the refrigerator.

Ordinary refrigerators are not recommended to be embedded, reason 1 is that when dissipating heat from the side and rear of ordinary refrigerators, heat transfer needs to be convection, and some manufacturers do not consider the heat dissipation needs of narrow spaces, which may be insufficient heat dissipation. Second, small spaces are difficult to clean. When using embedded, it is recommended to buy a refrigerator with bottom heat dissipation, and the manufacturer generally considers the problem of convection, and there are ventilation parts, so there is no need to worry about heat dissipation.