How much does it cost for a Xiali car to make chassis armor

It ranges from about 800 to 1000 yuan, and generally 4S shops are inflated, so it is recommended to go to a regular car repair shop outside to install it.

This general new car can not be made of chassis armor, because it is done when it leaves the factory, and if it is done, it will generally not exceed about five hundred.

Hello, this car is made of chassis armor, almost between 400-500 yuan, after all, the car is relatively small.

The general ** of this chassis armor needs about 500, but the 4S shop is still different from the repair shop**.

If you make chassis armor for this car, it is generally recommended that it is more cost-effective to buy materials by yourself, about 2-300, and then find someone to do it, about 100 man-hours.

Hello, this can be sprayed if it is a new car, if it is a used car, there is no need to spray it, and it will fall off soon.

Hello, if this car is used as chassis armor, it should be about 500 with ordinary armor**.

If you seem to make chassis armor for this car, the key depends on how thick the armor you spray, generally speaking, about 800 is enough.

Hello, this generally speaking, the chassis armor needs about 500, you can refer to it.

It can be sprayed a little, which can protect the chassis of the car, and can also play the role of sound insulation and dustproof, and the chassis armor can be sprayed once for three or four hundred.

More than a thousand dollars, it is still necessary to do.

According to the market ** as of June 6, 2021, chassis armor.

The cost is generally 400 yuan - 1000 yuan, if the selection of materials is expensive, then the ** will be higher.

The chassis armor of the domestic brand is about 30-90 yuan bottle, and the imported brand is about 100-500 yuan bottle. Under normal circumstances, about 6 bottles of spray paint can achieve the ideal thickness, and the protective effect is better. Some car owners use 3 bottles or even less spray in order to save money, and it is easy to spend money in vain.

In addition, the labor cost of spraying chassis armor is also very high, basically about 200 yuan.

Chassis armor common sense.

1. The spraying material has different protection functions, including rust prevention, sound insulation, impact prevention, wear resistance, heat insulation, shock resistance, etc., and it is recommended to mix it for better effect.

2. To detect the quality of a spraying material, the most simple way is to spray the paint directly on the transparent film, if the gap between the spray paint particles is large, it means that the spraying material covers the effect poorly and is easy to fall off.

3. The owner chooses the more expensive one, and many 4S stores will give away lifelong maintenance and repair services.

Professional chassis armor uses several materials, each material has different roles and functions, and it is also different, take 3M chassis armor materials as an example, there are rust-proof, soundproof, impact-proof, and wear-resistant. There are six sets of solutions for 3M chassis armor, and the owner can choose one according to the chassis treatment of the vehicle when it leaves the factory and his driving habits, and the materials used in each scheme are fixed. ** Aspects from more than 1,000 to more than 4,000.

It also provides a three-year warranty for the original factory, and the construction shop maintains and repairs it for life.

If the chassis armor is made in a chain store, it will cost about 300-500 yuan, and if it is done in a 4S store, it will cost 800-1500 yuan! If there is a higher bid, it is recommended that you buy the materials yourself.

Chassis armor is generally made at about 300-500 yuan.

The fees vary from place to place, ranging from 150-300 yuan for materials and 800-1000 yuan for materials.

@@@汉高底盘装甲 Kunming Good Hundred Years Car Supplies 0871 67385240@@@

1, whether the engine guard plate to install mainly depends on their own driving road environment, if driving the road environment, there is no need to install the guard plate, occasionally encounter bad roads, slow down in advance, slow through, install the guard plate in place, easy to cause abnormal noise, wind noise, etc., if the driving road environment is relatively poor, you can consider installation.

2. The chassis armor is mainly anti-corrosion, followed by a little bit of stone chipping, vibration, moisture, acid rain, salt, erosion of the vehicle chassis, prolonging the service life of the vehicle, the manufacturer sprays anti-corrosion coating when the vehicle leaves the factory, if you drive in the area, rain and snow or in the coastal zone, it is recommended that you can add another spray layer.

These two cost 1000

If you want to do this chassis armor, it's about three or four hundred yuan, it's very cheap, and it's pretty good to sit down, it's best to go to this repair shop, if you want to go to the 4S shop to do it, maybe the labor fee will be more than 200 yuan.

There is no need to do the chassis armor yourself, because the manufacturer has done basic protection treatment on the chassis before the vehicle leaves the factory, and your own spray may affect the pipeline on the chassis, and the chassis armor is generally used for about two bottles, ranging from tens of dollars to hundreds of dollars.

Summary. Hello, I am your exclusive technician, attentive, careful, dedicated to answering your car questions, for you to find the corresponding problem solutions and solutions!

The chassis armor of a new car is generally about 600 yuan.

1.Depending on the amount of anti-rust paint used, it is different.

If you use a large amount, it will be a little more expensive, no more than 1200.

2.Spraying the chassis of a car generally requires at least two cans of 4kg of anti-rust paint.

3.Choose oily armor for the chassis, because oily ones will be softer after spraying.

How much does it cost to make chassis armor for a new car?

Hello, don't worry, I can ask for your question, but wait a minute, I need text for about 2 minutes.

Hello, I am your exclusive technician, attentive, careful, dedicated to answering your car questions, for you to find the corresponding problem solutions and solutions! The chassis armor of a new car is generally about 600 yuan. 1.

Depending on the amount of anti-rust paint used, it is different. If you use a lot of money, it will be a little more expensive, and the chassis of a car will generally be sprayed at least two cans of 4kg of anti-rust paint 3Choose oily armor for the chassis, because oily ones will be softer after spraying.

There are actually two problems;

One is the problem of the guard plate;

1. The purpose of installing the lower guard plate is mainly to protect the engine from "supporting the bottom";

2. You can consider whether you need it according to the comprehensive factors such as road conditions and driving skills that you often drive;

3. The advantage is that it can effectively protect the engine; The disadvantage is to increase the dead weight, increase the fuel consumption, and put in the cost;

4. When a new car leaves the factory, some will have a very thin plastic shell, but it will not play a protective role; The more common materials on the market are aluminum alloy materials, steel plate materials, and carbon molecular materials; Its role is not the same; The carbon molecule is better in comparison; The first launch.

In the event of a major accident, the engine will automatically sink; But neither aluminum alloy nor steel plate can stop the engine from sinking; Only the carbon molecules will automatically break when they encounter extrusion force, so as to ensure personal safety; The second resin carbon molecule.

does not resonate; Thirdly, the weight of the resin is less than 3 kg, which is fuel-efficient; steel plates reach more than ten kilograms; At the market price, the cost of resin carbon molecules is about 200, and the cost of steel is more than 100;

The second is the so-called armor, which is actually a layer of anti-corrosion, and whether it is sprayed or not should be based on the needs of use; For example, what are the road conditions of frequent driving, temperature, humidity of the weather, use environment, etc.; In addition, it should be reminded that many vehicles already have a coating on the chassis.

The armor material painting Lei Dun set is 250 yuan - 400 yuan, and the construction cost is about 200 yuan - 300 yuan.